Question about Cars & Trucks

Open Question

Can I add front auxiliary hydraulics to this machine ? 873 bobcat skid steer

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: Hydraulic oil for new holland L553 skid loader

Any auto parts store should have this.

Posted on Aug 27, 2012

rustfarmer
  • 5309 Answers

SOURCE: My s579 bobcat skid steer loader is showing the code M0414(engine oil pressure extremely low) but I checked the oil level and its ok.any idea what could be happening

Connect mechanical oil pressure gauge to check real oil pressure. If OK, replace old pressure sender unit. If actually low, are there leaks? Engine may need bearings replaced, or could be incorrect oil or oil diluted by excessive fuel/leaky injectors.

Posted on Jan 29, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2060 mustang skid steer loader hydraulic system not working engiune runs good.


I have only old skid loaders but when wiring a switch from wires being cut, just connect all the same color wires to each other. The wiring is color coded so it shouldn't be a problem there. As for the hydraulic system, don't run the engine with no hydraulic oil or you'll burn up the pump. It's happened to me and pump had to be replaced. Check the hydraulic oil for full.

Jun 15, 2017 | Cars & Trucks

2 Answers

I have a 345 OMC mustang skid steer. deutz 2cyl diesel engine it is leaking hyd oil from under bottom of machine not on rims or tires what could be leaking


Not a CAR...

Skid Steers... like yours: we call bob-cats here (USA)...

EASIEST & most common are cracked & loose hoses.

You have a serious hydraulic pump & piston system on all the configurations I've been able to pull.

Any damaged SEAL EVERYWHERE in that circuit
is going to be hydraulic oil...

Crank-case, transmission case... (etc.).

What you are going to have to do is pressure clean the wettest areas... wipe them down... and make your EYES & BRAIN take a look around for the most severe leak...

Fix it... and repeat the process until you
have things nice, tight and dry...

Carnac the Magnificent

Jan 21, 2017 | Cars & Trucks

1 Answer

I took my bobcat post hole auger apart to service it and had to drain the hydraulic fluid! Now do I have to fill the auger head before connecting it to the machine? Or can the machine do it self?


if the hydraulic oil is from the auger head then the machine will fill and bleed out the air
the hydraulic oil would have been in the hydraulic motor that drives the auger

Jan 07, 2017 | Cars & Trucks

1 Answer

Can you put a mustang skid steer in nutral to tow it .


There may be a hydraulic release.,. auxiliary pressure release somewhere or some lever that releases the differentials., I'm not positive but most have these options.not sure where they are on your don't know model or size.but should be under a panel many under feet or in engine department.,

Jan 06, 2017 | Cars & Trucks

1 Answer

What do I need to check when my 2000 bobcat Maxine stop moving. I replaced the sensor for the lift but it still won't move.


in bobcats /skid steer loaders there are a multitude of safety micro switches that have to all work to get motion the main one is on the bar that locks the operator in the seat, there may be one under /in the seat It would be best to have a service technician call to fix the fault

Jun 19, 2015 | Cars & Trucks

1 Answer

Bobcat 873 not getting fuel


it could be pump. ive also found that the pickup tube breaks off causing the pump to suck air. also hows the fuel filter? could be a problem also

Sep 14, 2014 | Cars & Trucks

1 Answer

I have a 97' daewoo dsl601 skid steer that the boom and bucket won't move


You most likely have a defective hydraulic control valve, I would start the testing there.

Dec 07, 2011 | Daewoo Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...