Question about Holden Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to either replace the ignition lock cylinder or bypass the security system. If you need help with either one, repost.
Posted on Mar 09, 2009
SOURCE: Running engine stalled
There are many things that can cause a car to stall while driving it.
An engine is made up of many parts, and many of those parts are either
governed by a computer or provide input to the computer to help it
determine settings for the things it governs. Every vehicle has a fuel
system and an ignition system. The computer and its sensors monitor and
govern the fuel and ignition systems.
If your car stalled while you were driving it, look for an obvious reason first. Check to make sure you have fuel in the tank (if your gas gauge is working). Do not sit there and crank the car over, trying to get it to start, as you will quickly wear down the battery if it's not already bad.
The ignition system is composed of: ignition switch, neutral safety switch, security bypass, plugs, wires (if applicable) and a coil, or in the case of coil-over systems, many coils. The crank and cam sensors tell the engine where top dead center is. Though these sensors do not usually cause a no start, if they break, the computer will go into "limp home mode," which allows you to get the car to a service station. The car will run badly, and may stall out on you.
Because the running of a vehicle is complicated, there are many more things that can cause a vehicle to stall. These are the most common things that can cause a car to stall. Other things include wiring, fuses, relays, other sensors not working properly or at all, a bad alternator or a bad battery, or an overheating problem, just to name a few.
Posted on Aug 27, 2009
I have this same problem! The Info buttons I have, it has the option "Learn Remote", but I lost my manual and cannot figure how to program the two together?
Posted on Dec 02, 2009
SOURCE: 2001 4.0l aurora fuel
replace the fuel pump relay, or at least pull the fuse so it will stop draining the battery.You could try using a relay for something not as necessary (abe relay) in place of the possibly defective relay to see if that is the problem. Your starter may not be turning due to the constant drain of the fuelpump-if it runs all the time when the key is on, get the regulator checked as well-it may be defective. you can check it out by removing the vacuum line to it to see if there is gas in the line-then, it is bad. Computers rarely go bad-whoever is working on it is throwing parts at it, at your expense.
Posted on Mar 03, 2011
Tips for a great answer:
Aug 19, 2016 | Holden Cars & Trucks
Jun 23, 2016 | Cars & Trucks
May 20, 2016 | Cars & Trucks
Apr 25, 2016 | 1998 Holden VT Commodore
Nov 17, 2014 | Cars & Trucks
Nov 01, 2014 | Cars & Trucks
Feb 18, 2013 | Cars & Trucks
Oct 27, 2012 | Cars & Trucks
Apr 28, 2010 | 2008 GMC Savana Cargo
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: