Question about 1995 Chevrolet Caprice Classic

1 Answer

How do I remove the rear end axle on a 1995 poly traction police issued caprice classic

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

First off I think you mean Posi-traction which means both axles turn with power to the wheels. You remove the axle grease from the rear end draining it then you remove the cover try and do it slowly so that you don't make getting the old gasket off really hard after cover is off you will see the rear end look inside at the pinion gears the axle goes through them you will see how they are held on just remove the pins when putting back together use some axle grease on the splined ends and make sure that the housing and the cover is really clean so that the gasket seals properly ,nothing worse than rear end oil leaking.

Posted on Apr 21, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to remove rear end axle on a 1995 police issued caprice classic


get a workshop manual for the car ( police issue is irrelevant)

Apr 20, 2015 | Cars & Trucks

1 Answer

Front right wheel alignment


Have a front end safety check done first and repair / replace faulty units . Have a wheel alignment done but have them check the rear end alignment first as it affects the front settings. Worn bushes in the suspension arms allow the rear end to run side ways to the front.

Dec 20, 2013 | 1995 Chevrolet Caprice Classic

2 Answers

1995 chevy impala caprice classic lt1 how to install new plug wires dont no firing order


the firing order is 1-8-4-3-6-5-7-2. The Left side of the distrubuter 1-3-5-7 and Right side of the distributer is 2-4-6-8.

Sep 06, 2011 | 1995 Chevrolet Caprice Classic

2 Answers

Blown freeze plug somewhere onthe back of theengine


FREEZE PLUGS LOCATED ON REAR OF ENGINE BLOCK.YOU HAVE TO DROP THE TRANSMISSION AND REMOVE FLY WHEEL TO GET TO FREEZE PLUGS.

Jun 20, 2011 | 1995 Chevrolet Caprice Classic

2 Answers

How do i change my fuel pump in a 1989 chevorlet caprice classic


it is in the fuel tank so dropping the tank being empty first is best to do

Feb 20, 2010 | 1989 Chevrolet Caprice

2 Answers

Want to change gears in rear end for posi traction in a 98 gmc25000 is this possible?


It is possible, you just have to know what gear ratio you have in your Sierra. I had issues with my son's rear differential and did the Salvage Yard and picked one up for $250.00 with less then 45,000 miles. Remember new cars end up at Salvage Yards also.

Here are the Pro code for the rear ends to your Sierra and you can match one up at a Salvage Yard.
GQ1 -- AXLE REAR, STD RATIO
GT4 -- AXLE REAR, 3.73 RATIO
GT5 -- AXLE REAR, 4.10 RATIO
GU4 -- AXLE REAR, 3.08 RATIO
GU5 -- AXLE REAR, 3.23 RATIO
GU6 -- AXLE REAR, 3.42 RATIO
G80 -- AXLE REAR, LIMITED SLIP (POSI TRACTION)

HC4 -- AXLE REAR, 4.56 RATIO

Open Your glove box and look inside it. Should be a list of codes on the bottom.
Example: GU6 G80 According to that, you'll have a 3.42 posi

Good luck and keep me posted and call around Salvage Yards, there prices will differ from one to the next salvage yard and don't ask them for a posi rear end. The cost will you more, just search all the SUV's and look at the pro codes in the glove box. Hunt, most awd system SUV will have the G80 rear end.

Good luck and keep me posted.

Jan 10, 2010 | 1993 GMC Sierra K1500

1 Answer

Squeeky rear wheel bearing. How is it removed and replaced?


This is a rear wheel drive vehicle? Are you sure it's not a brake squeal?
The bearing sits in the end of the axle tube and is lubed with the differential fluid. You need to dissasemble the differential to remove the axle, to remove the bearing. You need a puller for that type of bearing.

Sep 08, 2009 | 1994 Chevrolet Caprice Classic

Not finding what you are looking for?
1995 Chevrolet Caprice Classic Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...