Question about 2004 Pontiac Montana
Auto zone did they clear codes?Did they said what is wrong?
Posted on Apr 20, 2015
Buy a scanner at autozone about $50 and clear them. That way you will be able to scan your self and know what is wrong with van. I have my own scanners
Posted on Apr 20, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.
Posted on Apr 08, 2009
If the DTC cannot be duplicated and is determined to be intermittent, reviewing the Failure Records data can be useful in determining when the DTC was last set. Also refer to Intermittent Conditions
Posted on Oct 11, 2009
Tips for a great answer:
Mar 18, 2014 | 2006 Pontiac Montana SV6
Jun 13, 2012 | 2004 Pontiac Montana
Aug 03, 2011 | 2004 Pontiac Montana
Nov 06, 2010 | Pontiac Montana Cars & Trucks
Feb 04, 2010 | 2002 Pontiac Montana
Sep 15, 2009 | 2005 Pontiac Montana SV6
Jun 01, 2009 | 2005 Pontiac Montana
May 04, 2009 | 2006 Pontiac Montana
Apr 08, 2009 | 2003 Pontiac Montana
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: