Question about Kia Cars & Trucks

Open Question

Timeng mark of v6 four overhead camshaft of kia cadenza timeng chain

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: 2002 kia spectra timming belt digram needed to

  1. Disconnect battery negative cable.
  2. Remove power steering and air conditioning compressor drive belt by loosening power steering fasteners.
  3. Remove generator bolts and generator belt.
  4. Remove water pump pulley.
  5. Remove crankshaft pulley and timing belt guide plate.
  6. Remove upper/lower timing belt covers.
  7. Turn crankshaft clockwise until "I" mark on intake camshaft pulley and "E" mark on exhaust camshaft pulley align with marks on cylinder head cover.
48d7b82.gif

Posted on Aug 29, 2009

Ad
johnjohn2
  • 5763 Answers

SOURCE: need to resit cam timeng firing frm top dead

heres a diagram of # 1 piston, also heres a diagram of the timing marks for the crank and cam gears,im not sure what your doing but good luck, hope this helps you.611d849.gif2617fdc.gif

Posted on Mar 31, 2010

alicantecoli
  • 22219 Answers

SOURCE: no timeng mark of deutz engine

is this a static type engine or the air cooled truck engine

Posted on May 10, 2012

  • 14585 Answers

SOURCE: How to set the timeng chain of kia cadenza because there is 3 timeng marks in camshaft and they have four camshaft

Buy a manual or go to alldatadiy.com and buy it. $30 dollars is a lot cheaper than having to replace an engine because of missed timing marks. I use alldata, I buy it by the car. If I had this car on there I would give you the info. Sorry I don't.

Posted on Apr 19, 2015

  • 3640 Answers

SOURCE: How can i determined the timeng mark of the camshaft in the v6 kia cadenza there is 3timeng marks in one camshaft and this engine is four overhead camshaft

To ensure you don't get the timing expensively wrong I advise vehicle-specific information.

The additional marks could be marks for safe dismantling or assembly or marks for performing a valve timing check or perhaps a cam sprocket made for a variety of models.

It should be relatively easy to determine which mark to use, though you mention nothing about whether other marks are present and which cylinders are served by that camshaft.
Assuming other marks are present and having removed the spark plugs and exposed the valve gear the engine can be set at TDC on the timing cylinder and whatever other marks there is aligned, ensuring the valves of number 1 cylinder are both closed and the cams are in the compression position for that cylinder.

With the engine in this position the valves of the first cylinder in the second half of the firing order should be in the overlap position, which I think is number 4 (I don't have data to hand).

Setting No 1 and No 4 pistons and valves in this way should then indicate which of the three marks are to be used for timing, again assuming there is a static mark to align one of the sprocket marks with.

It isn't unusual for engines built by robots to require setting tools for subsequent maintenance and repair; in other words it isn't unusual for engines built by robots to have no timing marks at all...

Setting an engine timing by logic is really only suitable as an emergency procedure unless verified by TDC finder, degree discs and dial gauges along with valve timing information.
Manufacturer information is a much easier method.

Posted on Apr 19, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust valves on a 2006 3.5L V6 Toyota Avalon?


There is a Toyota Technical Service Bulletin issued for this:-
T-SB-0291-08 September 11, 2008 2GR-FE Valve Timing

Procedure Service Category Engine/Hybrid System Section Engine Mechanical Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2009 Avalon 2007 - 2009 Camry VDS(s): BK46K 2008 - 2009 Highlander 2006 - 2009 RAV4 Engine(s): 2GR VDS(s): BK31V, BK32V, BK33V, BK34V, ZK31V, ZK32V, ZK33V, ZK34V, ZK35V 2007 - 2009 Sienna Introduction This service bulletin provides information regarding valve timing inspection and service guidelines for vehicles equipped with 2GR-FE engines. © 2008 Toyota Motor Sales, USA Page 1 of 5 T-SB-0291-08 September 11, 2008 Page 2 of 5 2GR-FE Valve Timing Procedure Introduction (Continued) Figure 1. 3 2 1 5 9 8 7 6 4 1 RH Bank Intake Camshaft Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 3 of 5 2GR-FE Valve Timing Procedure Inspection 1. Set the No. 1 cylinder to TDC/compression. A. Set the timing mark to 0 on the timing chain cover by rotating the crankshaft clockwise. B. Verify the timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH Bank (Bank 1) Small Mark Single Line LH Bank (Bank 2) Large Mark Double Line HINT When the engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake Camshaft Timing Gear 2 1 1 Bearing Cap Timing Mark 2 Gear Timing Mark © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 4 of 5 2GR-FE Valve Timing Procedure Inspection (Continued) Figure 5. LH Bank Intake Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 6. LH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark HINT If the timing marks appear vastly out of alignment, turn the crankshaft one revolution (360 ) clockwise and note the position of the timing marks. Component Removal Guidelines 1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each other prior to disassembly: • Timing gears • Timing chain • Timing chain No. 2 NOTE This relationship MUST be maintained. The intake gear is timed in relation to the crankshaft via the timing chain; the exhaust gear is timed in relation to the intake gear via the No. 2 timing chain. © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 5 of 5 2GR-FE Valve Timing Procedure Component Removal Guidelines (Continued) 2. If NEW camshaft timing gears or the No. 2 timing chain are being installed, the two yellow links on the No. 2 timing chain can be used to ensure correct relationship between the intake timing gear and the exhaust timing gear. Figure 7. 1 1 Yellow Link A. Align the paint mark on the timing chain with the intake gear timing mark (to ensure the intake gear is correctly timed to the crankshaft). Figure 8. RH Bank and LH Bank 3 3 4 3 3 4 5 4 5 4 1 2 1 RH Bank 2 LH Bank 3 Yellow Link 4 Gear Timing Mark 5 Timing Chain Paint Mark B. Align the two yellow links on the No. 2 timing chain to the timing marks on

May 04, 2015 | 2006 Toyota Avalon XLS

1 Answer

How can i determined the timeng mark of the camshaft in the v6 kia cadenza there is 3timeng marks in one camshaft and this engine is four overhead camshaft


To ensure you don't get the timing expensively wrong I advise vehicle-specific information.

The additional marks could be marks for safe dismantling or assembly or marks for performing a valve timing check or perhaps a cam sprocket made for a variety of models.

It should be relatively easy to determine which mark to use, though you mention nothing about whether other marks are present and which cylinders are served by that camshaft.
Assuming other marks are present and having removed the spark plugs and exposed the valve gear the engine can be set at TDC on the timing cylinder and whatever other marks there is aligned, ensuring the valves of number 1 cylinder are both closed and the cams are in the compression position for that cylinder.

With the engine in this position the valves of the first cylinder in the second half of the firing order should be in the overlap position, which I think is number 4 (I don't have data to hand).

Setting No 1 and No 4 pistons and valves in this way should then indicate which of the three marks are to be used for timing, again assuming there is a static mark to align one of the sprocket marks with.

It isn't unusual for engines built by robots to require setting tools for subsequent maintenance and repair; in other words it isn't unusual for engines built by robots to have no timing marks at all...

Setting an engine timing by logic is really only suitable as an emergency procedure unless verified by TDC finder, degree discs and dial gauges along with valve timing information.
Manufacturer information is a much easier method.

Apr 19, 2015 | Kia Cars & Trucks

1 Answer

How to set the timeng chain of kia cadenza because there is 3 timeng marks in camshaft and they have four camshaft


Buy a manual or go to alldatadiy.com and buy it. $30 dollars is a lot cheaper than having to replace an engine because of missed timing marks. I use alldata, I buy it by the car. If I had this car on there I would give you the info. Sorry I don't.

Apr 19, 2015 | Kia Cars & Trucks

1 Answer

No timeng mark of deutz engine


is this a static type engine or the air cooled truck engine

May 10, 2012 | Cars & Trucks

1 Answer

Kia ceed petrol does it have a timing belt


All 4 stroke motors have a timing belt. the belt runs from the crankshaft pulley to the camshaft to operate the inlet and outlet valves. any more questions just ask. Alex.

May 19, 2011 | 2011 Kia Cadenza

2 Answers

Need to resit cam timeng firing frm top dead center no1 wat is no 1 piston


heres a diagram of # 1 piston, also heres a diagram of the timing marks for the crank and cam gears,im not sure what your doing but good luck, hope this helps you.611d849.gif2617fdc.gif

Mar 31, 2010 | 1996 Subaru Legacy

1 Answer

Where are timing chain marks on the engine of


Please don't forget to rate:

39900a5.gif

Crankshaft and camshaft alignment marks—2.4L (VIN X) Engine

9f5c6e9.gif
Camshaft and crankshaft alignment marks—Chrysler 2.5L (VIN N) engine

acb6bd1.gif
Timing belt engine sprocket timing—2.5L (VIN H) engine

Jan 04, 2010 | 2001 Chrysler Sebring

1 Answer

2002 kia spectra timming belt digram needed to verify timming marks. Dual overhead camshaft.


  1. Disconnect battery negative cable.
  2. Remove power steering and air conditioning compressor drive belt by loosening power steering fasteners.
  3. Remove generator bolts and generator belt.
  4. Remove water pump pulley.
  5. Remove crankshaft pulley and timing belt guide plate.
  6. Remove upper/lower timing belt covers.
  7. Turn crankshaft clockwise until "I" mark on intake camshaft pulley and "E" mark on exhaust camshaft pulley align with marks on cylinder head cover.
48d7b82.gif

Aug 29, 2009 | 2002 Kia Spectra

2 Answers

94 Acura Vigor


timeng belt fex

Jun 07, 2008 | 1994 Acura Vigor

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...