Question about 1996 Lincoln Continental

1 Answer

How do I change the radiator on a 96 lincoln contiental 32v intech V8 ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Lincoln Expert
  • 142 Answers

RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove Radiator

Posted on Apr 23, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 97 Lincoln Contiental Drivers door ajar message

It is a sticky sensor in the door latch mechanism. Spray it w/ WD-40 and follow up with a dose of silicone spray. Open/close doors several times and it should be ok. If you have a problem with 1 door the other 3 are sure to follow---DO THIS TO ALL 4 DOORS!!!!!!!!!

Posted on Dec 22, 2008

  • 8 Answers

SOURCE: how to replace an alternator on a 96 lincoln continental 4.6 V8

take out the top 4 bolts above the altenator, between those metal tubes on the metal bracket. then u have 1 bolt holding the wires to the altenator on that bracket aswell remove that. then remove the coolant reserve bottle and stick a breaker bar or rend of a ratchet in the tenchenor pulley square slot pull it back twords the head lights the belt will loosten then remove it from the altenator. then u will see 2 more bolts on the bottom side of the altenator by the pulleys and belt. Remove them 2 bolts all the way and the altenator will drop out of the bottom of them metal tubes and slide through the sides of them and its out... its very ez and does not need the tubes removed its a lot ezer than it looks.. sorry about my spelling im an infantryman not a teacher.

Posted on Feb 17, 2009

  • 67 Answers

SOURCE: water pump repair

42184607

Posted on Apr 17, 2009

outdoorsman5
  • 631 Answers

SOURCE: where do i spray quick start fliud in a 96 lincoln

Do not spray starting fluid in your engine!!!!!!!! You can and will do damage to your engine. Not Recommended!!!!!!

Posted on Dec 05, 2009

SOURCE: 2002 LS: aHow do I fill radiator in my V8 Lincoln LS...

First- to drain ,you can reach the drain valve,from the pass side,if you lay on the ground and reach up to the radiator. You do not even have to raise the vehicle up
Second- mix Yellow GO5 Coolant about 50/50 or 60/40. Do not use Green in a Ford or Orange GM
To Fill- Remove the front two plastic screw type buttons,from the engine cover
-Remove the cover
The radiator cap is on the front of engine,on top,it is plastic
Remove cap and that is your fill point
Run engine to warm and get thermostat open,as you would with any vehicle
Top off coolant,replace cap
VERY IMPORTANT-next to the Power Brake Booster,and just under it,is a BLEEDER HOSE;to let air out of system. Turn screw slot ,only a little,DO NOT REMOVE SCREW. When coolant runs out close.
Fill-Degas Bottle,to full line,with coolant.
Check the next couple days on resevoir level ( Degas Bottle)

Posted on May 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 lincoln continental over heating all ready replaced water pump and thermostat


Should scan your car's computer for proper diagnostics. Look fro proper service who has the scanner, Might save you money replacing innecessarily parts

Jun 22, 2015 | 2001 Lincoln Continental

1 Answer

Dayco belt routing diagram


Check hand book in the glove box or draw a pattern before you pull it apart,check under the hood when raised.

Sep 05, 2014 | 2000 Lincoln Continental

1 Answer

Where is thermostat on a intech v8 motor


follow the upper radiator hose to the engine. at the terminus is the thermo housing

Apr 29, 2013 | 1998 Lincoln Continental

1 Answer

How do i change the water pump belt on my 96 32v v8 cadillac


Hello there:

5f07b70.jpg
Remove the water pump belt shield
3f40e10.jpg
Loosen the water pump belt adjuster and . remove the belt from around the water pump

Sep 29, 2010 | 1996 Cadillac DeVille

1 Answer

How do you reset the engine codes for a 1997 lincoln? can you replace factory cat with a preformance cat system, that won't screw up the computer monitoring. i have the 32v intech and the first bank is...


You'll need an OBD II scan tool to clear them. A performance cat replacement is fine. I would replace it, due to the fact that alot of times the insides of the converter break apart inside.

May 01, 2010 | 1997 Lincoln Continental

1 Answer

Where do i spray quick start fliud in a 96 lincoln contiental


Do not spray starting fluid in your engine!!!!!!!! You can and will do damage to your engine. Not Recommended!!!!!!

Dec 05, 2009 | 1996 Lincoln Continental

1 Answer

How do you get to the spark plugs on the 99 lincolin 32v


I have the same question as baldie (posted 5/17/09), as how to access the spark plugs on a 32V V8 in a 1999 Continental. No one has posted a response.

May 17, 2009 | 1999 Lincoln Continental

Not finding what you are looking for?
1996 Lincoln Continental Logo

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...