Question about Cars & Trucks

Open Question

What kind of transmission fluid do you put in a 580 C case backhoe?

Need to know what kind of transmission fluid you put in 1977 case 580-C backhoe

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: transfer case fluid for 99 suburban

If it has auto 4x4. which will have 4 push buttons on the dash it will take auto trac fluid that you will need to get at your local GM dealer. A regular transfer case will take Automatic transmission fluid.

Posted on Mar 31, 2009

Ad
  • 24 Answers

SOURCE: my transmission fluid is has to be changed and what kind of transmission gasket do I need and how much fluid do I need

Feel lucky your car has made it this far!!! I need to know engine, tranny, sub model etc..

Posted on Apr 24, 2009

  • 37 Answers

SOURCE: I need to know what kind of transmission fluid to

Check you owner's manual. Igf you no longer have it then call a nissan dealer. Last resort is to go to an auto parts store and they should be able to help you. You just need to be careful . If they do noyt look it up then I would go somewhere else and ask the question again. If you get the same answer at two or more places then you should be good to go.

Posted on Feb 11, 2010

  • 14036 Answers

SOURCE: i just need to know what kind of transmission

YOU HAVE TO LOOK IN OWNERS MANUAL OR FACTORY MANUAL IN GLOVE COMPARTMENT.IT WILL TELL YOU WHAT TYPE TRANSMISSION YOUR VECHICLE USE.IF YOU DONT HAVE A OWNERS MANUAL YOU CAN CALL MITSUBISHI SERVICE DEPARTMENT.THEY WILL LOOK IT UP AND TELL YOU.

Posted on Mar 04, 2010

  • 47 Answers

SOURCE: What kind of fluid do

If the vehicle has an Automatic Transmission: Dextron II

If the vehicle has a Manual Trans, its complicated.
Depending on Trans model:
The 77mm 5-speed and 89mm 4-speed overdrive use Dextron II ATF.
The 117mm 4-speed uses API GL5 SAE 80W90 gear lubricant.
GM recommends Synchromesh Trans Fluid (1052931) in both the 85mm 4-speed and 5-speed.
Hope this helps!

Posted on Dec 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Still looking for what case backhoe has for ohm range on fuel sending unit. case 580 sl series 2 empty to full


Click on the link, I can only talk to you in automotive terms. I know nothing about a backhoe. The sending unit has to have voltage, correct? Get a resistor for empty and one for full, If the gage acts proper to the resistors, the problem is the sending unit.
If that isn't the answer you wanted, sorry, that's all I got.
http://www.tanksinc.com/index.cfm/page/ptype=results/category_id=159/mode=cat/cat159.htm

May 01, 2017 | Cars & Trucks

1 Answer

How to fix reverse on my case 580 backhoe


is it a shuttle drive ? any case/IH dealer can assist you

Jan 26, 2017 | Cars & Trucks

1 Answer

I have a 1989 Case 580 backhoe tractor. I am interested in increasing the horsepower. It has a mechanical turbo. Can you help me?


Can you tell me which injection pump you have on your 580K. It could use a robert bosch or a C.A.V. Let me know I will help you. One thing you need to know, with a cav pump the engine will not have much torque rise in power. The engine is a powerhouse that runs hydraulic pumps at full throttle. This is a full throttle tractor that should run that way all time .If you are trying to back up hill at say half throttle ,it will not do it, try First gear full throttle. Remember the tractor with bucket and backhoe weight is about 16000# . I do not think adjusting the fuel delivery will help this tractor.

Jan 24, 2017 | Cars & Trucks

1 Answer

Where do I check the brake fluid on a 580C?


I am going to have to guess you are referring to a 580 C Case backhoe.
In any case never ever put anything in a brake fluid reservoir but brake fluid, and the right fluid to be sure, or you will seriously damage or destroy the brakes "forever".
The brake fluid reservoir is usually plastic, and often you can see through it just enough to see the level of brake fluid.
It should be located near the front of the brake pedal, and is usually sort of white in color, with a black cap that can be screwed off.
God bless your efforts.

Aug 04, 2016 | Cars & Trucks

1 Answer

Specs on head bolts and order to torque sequence for a 580d case backhoe


http://www.ioffer.com/i/case-580d-loader-backhoe-service-manual-580-d-bonus-162592324

Jun 05, 2015 | Cars & Trucks

1 Answer

Transmission fluid for a 1977 Dodge RV440 engine, automatic.... A1 transmission.. need to know what kind


A model from the 1970s should take Dextron. There are or were several types, II III and IV. I'm fairly sure any version of Dextron should work. You might want to check with a real transmission shop to make sure. It should also be stamped into the dipstick.

Jul 11, 2013 | Cars & Trucks

1 Answer

I have a case 580 backhoe and when you push the clutch down and try to put it in forward or reverse it grinds and wont go in gear


Just a guess from an old shadetree mechanic: pedal pressure is wrong-too weak, or the clutch pressure plate bolted to the flywheel is bad. They will wear on the fingers and the plate's springs can wear. There should be a Case repair facility at a dealership, anywhere close? A mechanic familiar with your case 580, they often don't mind talking a bit over the phone about a mechanical problem. I meant by pedal pressure-I don't know if the rig is hydraulic clutch or mechanical linkage or cable operated, but check if the clutch pedal can be adjusted. On a hydraulic clutch with a clutch master cylinder and an associated slave cylinder, there is no adjustment. You just have to keep the reservoir full of dot-3, or dot-4 brake fluid. So that's my guess, something wrong with the pedal, or worse, something wrong with the pressure plate. You definitely need a second opinion. Good luck.

Jan 25, 2013 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...