Question about Daewoo Cars & Trucks

1 Answer

Can I put a different front brake set up on my daewoo musso because I cannot get hold of the anti rattle clip anywhere they are stamped made in australia

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 998 Answers

Try an Auto wrecker. Im sure they would have one, but they would probably want to sell you the whole caliper assy.

Posted on Apr 19, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the anti rattle clip go for front brakes on an 89 cavalier?


I have sent along a image of brakes ,there is a clip that holds the inner brake pad to caliper cup

Sep 28, 2014 | 1989 Chevrolet Cavalier

2 Answers

Brakes rattle


To your direct question - I don't know the Highlander model in detail, but as a general response, if the brakes are noisy when NOT applied, the piston in your new caliper may not be returning properly.

The return spring in disc brakes is actually the rubber fitted around the caliper piston. If this is causing the piston to be wrongly positioned, the brakes will be noisy. Check that the rotor can be turned by hand when the brakes are not applied. Also check that the piston is not retracting from the pads a very long way, which it should not do.

It is worth making very sure the spring clips are fitted correctly. Some can be easily put in the wrong way round.

If the brakes are squealing when applied, that is a different problem. You can get a disc brake anti squeal liquid, which is applied to the back of the pad on assembly to the caliper. Also double check all the anti squeal shims are correctly installed.

At this range, that's all I can think of right now.

Nov 24, 2011 | 2005 Toyota Highlander

1 Answer

How to change rear barke shoes


Brake Drums & Brake Shoes Removal & Installation To Remove:
Rear Drum Brakes kia-09-18-7627.gif

  1. Raise and safely support rear of vehicle.
  2. Release parking brake.
  3. Remove rear wheel assemblies. NOTE: If brake drum is stuck, install two 8 mm bolts into threaded holes and tighten evenly.
  4. Remove top return spring, front and rear shoe spring clips and hold-down pins.
  5. Remove anti-rattle spring and adjuster spring. NOTE: Note position of operating lever prior to removal.
  6. Remove bottom return spring.
  7. Remove clip and washer and detach parking brake cable from rear shoe.
  8. Remove brake shoes.
To Install:
  1. Lubricate all brake shoe contact points with appropriate grease.
  2. Place operating level into position on hub.
  3. Install rear brake shoe and connect parking brake cable to rear shoe with washer and clip.
  4. Install front brake shoe and install bottom return spring.
  5. Install hold-down pins and spring clips.
  6. Position operating lever and install top return spring.
  7. Install anti-rattle spring and adjuster spring.
  8. Install brake drum and screws.
  9. Adjust brakes and install rear wheel assemblies.
prev.gif next.gif

Jan 21, 2011 | 2003 Kia Spectra

1 Answer

I need to know how to change the front brakes on a 94 jeep grand cherokee laredo.


  1. Raise and support the vehicle safely using jackstands. Remove the wheel(s) on the side to be worked on.

NOTE: Removing a small amount of brake fluid from the master cylinder using a turkey baster


zjlimited_10.jpg

Fig. 4: Tighten the C-clamp until the piston reaches the bottom of its bore


zjlimited_11.jpg

Fig. 5: Remove the caliper mounting bolts


zjlimited_12.jpg

Fig. 6: Slide the caliper off the brake rotor

  1. Drain a small amount of the brake fluid from the front reservoir using a suction gun or a turkey baster.
  2. Place a C-clamp on the caliper so that the solid end contacts the back of the caliper and the screw end contacts the metal part of the outboard brake pad.
  3. Tighten the clamp until the caliper moves far enough to force the piston to the bottom of the piston bore. This will back the brake pads off of the rotor surface to facilitate the removal and installation of the caliper assembly
zjlimited_13.jpg

Fig. 7: Support the caliper so that no tension is placed on the brake hose


zjlimited_14.jpg

Fig. 8: Hold the anti-rattle clip while removing the outboard pad (4)


zjlimited_15.jpg

Fig. 9: Removing the outboard brake pad


zjlimited_16.jpg

Fig. 10: Remove the inboard pad and anti-rattle clip


zjlimited_17.jpg

Fig. 11: Removing the inboard brake pad


zjlimited_18.jpg

Fig. 12: Removing the anti-rattle clip

  1. Remove the C-clamp.
Do not push down on the brake pedal or the piston and brake pads will return to their original positions up against the rotor.
  1. Remove the caliper mounting bolts. Tilt the top of the caliper outward and lift it off the rotor.
  2. Hold the anti-rattle clip against the caliper anchor plate and remove the outboard brake pad.
  3. Remove the inboard pad and the anti-rattle clip. Be sure that the support spring is removed with the inboard pad.
zjlimited_19.jpg

Fig. 13: Install the support spring onto the shoe of the inboard brake pad


zjlimited_20.jpg

Fig. 14: Installing the inboard pad


zjlimited_21.jpg

Fig. 15: Piston extension on new and worn brake pads

  1. Use a piece of wire to support the caliper so that no tension is placed on the brake hose. Do not allow the caliper to hang by the brake hose.
To install:
  1. Clean all the mounting holes and bushing grooves in the caliper ears. Clean the mounting bolts. Replace the bolts if they are corroded or if the threads are damaged. Wipe the inside of the caliper clean, including the exterior of the dust boot. Inspect the dust boot for cuts or cracks and for proper seating in the piston bore. If evidence of fluid leakage is noted, the caliper should be rebuilt.
Do not use abrasives on the bolts in order not to destroy their protective plating. You should not use compressed air to clean the inside of the caliper, as it may unseat the dust boot seal.
  1. If not already in place, attach the support spring to the inboard brake pad.
  2. Install the anti-rattle clip on the trailing end of the inboard pad's anchor plate. The split end of the clip must face away from the rotor.
  3. Install the inboard pad in the caliper. The pad must lay flat against the piston.
  4. Install the outboard pad in the caliper while holding the anti-rattle clip.
  5. With the pads installed, position the caliper over the rotor.
Before securing the caliper, ensure the brake hose is not twisted, kinked or touching any chassis parts.
  1. Lubricate the caliper pins and bushings with silicone grease. Line up the mounting holes in the caliper and the support bracket and insert the mounting bolts. Make sure that the bolts pass under the retaining ears on the inboard shoes. Push the bolts through until they engage the holes of the outboard pad and caliper ears. Thread the bolts into the support bracket and tighten them to 7-15 ft. lbs. (9-20 Nm).
CAUTION On models with manual/power brakes, pump the pedal until the caliper pistons and brake shoes are seated. On models with anti-lock brakes, turn the ignition ON and allow the booster pump to build pressure. Pump the brake pedal until the shoes are seated and the indicator lights turn off.
  1. Fill the master cylinder with brake fluid and pump the brake pedal to seat the pads.
  2. Install the wheel assembly and lower the vehicle. Check the level of the brake fluid in the master cylinder and fill as necessary.

Remember to rate this, good luck.

Nov 04, 2010 | 1994 Jeep Grand Cherokee

1 Answer

How to replace anti-rattle clips in a 2002 chevy blazer. I went to replace my brake pads on the front and forgot to put clips in. this is my first time changing pads.


You'll need to take out the pads agaon and clip the anti rattle plates to the back of the pads and then reassemble, the same way you did before....Don't open the brake lines or nipples just push the pistons into the cylinders with a convenient lever, so you have room for the new items to fit....Once fitted remeber to pump up the brakes before you start or move the vehicle....Regards Johngee

Oct 07, 2010 | 2002 Chevrolet Blazer

1 Answer

Jingling noise? 1990 chevy k2500


If you had front disc brakes changed recently, then more than liklely someone forgot to put your anti rattle clip in with the installation. if you can stand the rattle it's not life threatning. if no brake job recently, then open the hood and look for something loose that would be rattling.

Jun 23, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How repair front brakes jep cherokee 1989


I think you are mean the anti-rattle clips. They go on the anchor plate that holds the pads in place. If you need more information, let me know, I will try to find a diagram for you, or explain the proper position of the clips.

Oct 11, 2008 | 1989 Jeep Cherokee

1 Answer

Rattle from the front at low speed, think is from brake pads


Many times the spring clips, also known as anti-rattle clips are left out or broken, this will cause a rattle in the wheel area, this was the case on my Corvette after the brakes were done by the used car lot were I gought the car, I put a screw driver through the wheel spoke and pushed the pad up and down, it should not move easily.

Aug 06, 2008 | Jaguar XKR Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...