Question about 2008 Dodge Charger
Or ...bad fuse
or ... bad regulator (Wires have dropped off the spools).
Posted on Apr 20, 2015
Bad motor or switch
Posted on Apr 20, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.
Posted on Jun 08, 2009
1. check fuses
2. if motors are good, more likely it is, it will be the windows regulator or windows switch, both tend to wear out the contacts over times. the windows switch pretty expensive, its run about 123.00 buck each and the regulator run 59.00 each. more likely will be regulator. if it not the windows switch is good. hope that help some, both not hard to replace and not easy.
Posted on Jul 21, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
SOURCE: Power Window wont go down
A l o h a ! There are two separate issues as possibilities:
#1. The tracking of the actual glass relies upon a cable-driven
system that is powered by the servo motor. If the glue used
to hold the glass to the framework has failed then you must
first find suitable adhesive to attach the two back together before
proceeding. Then the alignment of the two when the glue is setting
is critically important.
There are cables which raise and lower the unit and the pulleys
that accomplish this must be returned to the original positions
before addressing the electrical motor issue.
#2. Once it has been established the tracking mechanism is functioning
properly then check for a hot lead going from the switch to the motor
itself. No juice at switch? Check fuses. Juice to motor but no action
can mean a replacement (new or used) is needed.
Posted on Sep 02, 2012
Tips for a great answer:
Jul 19, 2015 | Dodge Cars & Trucks
Sep 10, 2014 | 2008 Dodge Charger
Nov 04, 2012 | 2008 Dodge Avenger
Aug 24, 2011 | 2008 Dodge Charger
May 28, 2011 | 2008 Dodge Avenger
Feb 07, 2011 | 2008 Dodge Avenger
May 04, 2010 | 2008 Dodge Charger
82 people viewed this question
Usually answered in minutes!