Question about 2006 Chrysler 300

1 Answer

06 chrysler 300. When I'm at a red light, the oil check on the dash appears then a ding sound. I notice the car idles roughly amd when the light turns green and I start driving the car is fine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 509 Answers

Ok what is wrong is your idling is to low which is controlled but a ( Throttle Position Sensor Switch) buy one of these and your problems will be gone, The ding you hear is low oil pressure warning going off once the idling goes back up the oil pressure goes back to being good.

Posted on Apr 19, 2015

  • cesar garcia Apr 28, 2015

    Thank you man! I'll try it soon enough.

  • Shade Tree All Repair

    No problem just watch when you remove it because there is a certain way it goes when inserted once you remove the screws carefully slide it out and watch there is a little arm and slot and you will be fine. If you need anything I will always be here for ya.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tripletauto
  • 1450 Answers

SOURCE: car won't start wants to turn over but nothing.

sounds like you have a blown head gasket this would explain loss of coolant and running poorly excessive smoke.

Posted on Nov 10, 2008

  • 49 Answers

SOURCE: OIl pressure light flickers

change the oil pressure switch or the wrong oil

Posted on Jan 18, 2009

bunnydawg
  • 5158 Answers

SOURCE: lights completley shut off and on even while driving chrysler 300

you need to replace the relay for the headlights located in the fuse box in the engine compartment near the battery. the headlights you see when you shut off the others are likely your day time running lights

Robert

Please take a moment to rate this solution.. thanks

Posted on Feb 01, 2009

jgwhomeequip
  • 1902 Answers

SOURCE: Oil Pressure Warning light

Sounds like possiblity of the oil pump being bad, and is setting off other sensors on your car.

Posted on Feb 10, 2009

shocktroop40
  • 155 Answers

SOURCE: while car is idle oil light blinks on and while driving light goes out

First, check the oil level, if ts low that could be your problem. If its full, you could have either a faulty oil pressure sending unit, or (hopefully not), a bad oil pump. If the car is still under warranty, I'd take it to Chrysler and have them look at it. You could try a higher viscosity of oil too, but I'd make sure everything else is ok first. That cars still a little too new to be having problems like that.

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 chrysler 300 oil pressure light goes off and on im concerned its my engine


Test the sender first. It could just be a poor electrical connection on the sender or the sender itself. Check oil level too. If you have a lot of miles on the engine it's possible the oil pump is worn.

Dec 17, 2016 | 2006 Chrysler 300

1 Answer

What causes I/P lights to blink when put in gear?


2005 Chrysler 300 2.7l Throttle Body Control Warning Light ...

www.cargurus.com > Questions > Chrysler > 300

CarGurusAug 7, 2014 - 2005 Chrysler 300 2.7L throttle body Control warning light or "RED ...bolt starts flashing and the car gets stuck in limp mode or second gear.Missing: p

PCM/TCM Software Updates Will Address Shifting Problems ...

repairpal.com > Problems > Chrysler > 300
Chrysler 300 PCM/TCM Software Updates Will Address Shifting Problems. ... If you experience rough shift and/or shuddering during gear shifting, software ... Car would not go over 20 mph and check engine light along with ABS/BAP light ... Once he put the new battery in the car ran fine for a while and the problems all cam ...Missing: p

ECM with bad connection, causing engine to stall - 2005 ...

? 1:08
https://www.youtube.com/watch?v=IgLe0t5may8
Oct 23, 2011 - Uploaded by SignedOnAsJoe
Check NHTSA chrysler extended the warranty on fuel tanks. ...Any one knows how can I put a used ecm in my 2005 300 do I need to buy new ... How to view fault codes Chyrsler 300 HTWL - Duration: 1:22. by Leo P 28,908 views ... Rough Run, Stumble or Stall, Check Engine Light-How To Check Vehicle ...Missing: blink

Dec 19, 2015 | 2005 Chrysler 300 Touring

1 Answer

2007 chrysler 300 car won't start OBD light on.


Sounds like an electrical issue. You'll want to take it in.

Nov 04, 2012 | 2006 Chrysler 300

1 Answer

Chrysler 300 2006 v-6 tps light on dash


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 08, 2012 | Chrysler 300 Cars & Trucks

2 Answers

Red battery light appeared on dashboard. Please advise the potential problem. Chrysler 300c


Either your battery is shot and no longer will take a charger and your PCM is noticing low voltage or your alternator is not longer charging well enough to provide adequate voltage to your PCM. THese are 2 signs of the battery light

Mar 22, 2010 | 2005 Chrysler 300

1 Answer

Red light beeps and flashes on dash


i am not 100% but i think it is the floater or whatever in the gas take figureing out for sure the amount of gas you have. or it might be the feul pump wraming up.

Apr 18, 2009 | 2006 Chrysler 300

1 Answer

Dash lights on, running rough


i have the same car and year. Both my lights flashed i bought it to my mechanic he checked my oil and said that when i got my car serviced at a cheap place they put in cheap oil. he hooked up his computer to mine and got an o2 sensor code. he shut the light off and changed my oil. all set. i also use premium gasoline and my car runs very good.

Apr 13, 2009 | 1999 Lexus ES 300

1 Answer

Rough idle and check engine light concord


Check your EGR valve and your IAC Idle Air Control valve make sure both are functioning correctly

Feb 15, 2009 | 1997 Chrysler Concorde

Not finding what you are looking for?
2006 Chrysler 300 Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...