Question about 2008 Honda Accord
Posted by Anonymous on
Hi,just undo earth on battery,then jack the car up and put it on axle stands,there is the main cable wich you take off and there maybe two wires if so unplug them,then just undo the two or free bolts and it will just come out nice easy job..
all the best
Posted on Apr 19, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
no, 12mm wrench or ratchet on 12mm socket. the piston is tough to push back in. its a twist in type and you will need some force to push and twist the piston back in. - note rear brake pads wearing out on the new 08-09 accords are very common and if under 16-18 thousand miles it may be covered. honda knows about this problem
Posted on Oct 27, 2009
Detach the cable from the negative terminal of the battery. Caution: If you have an anti-theft radio, make sure you have the activation code before disconnecting the battery.
Remove the battery and battery tray from the engine compartment (remove the battery first, then remove the bolts for the battery tray and remove it.).
Remove the lower radiator hose and the wiring harness from the starter bracket. Make sure they are positioned out of the way.
Clearly label, then disconnect the wires from the terminals on the starter motor solenoid (the smaller cylinder attached to the starter). Disconnect any clips securing the wiring to the starter.
Remove the mounting bolts (two) and detach the starter (pull it gently out of its housing).
Reverse this procedure for installation.
Hope this is of help to you.
Posted on Dec 26, 2009
disconnect the cable to the battery........there is 3 bolt holding the starter to the engine/transmission housing. You may need to remove the air intake manifold to gain access to the work area.
Posted on Mar 24, 2010
Tips for a great answer:
Mar 24, 2016 | 2008 Honda Accord
Sep 11, 2014 | 2008 Honda Accord
Jan 26, 2014 | 2008 Honda Accord
Aug 03, 2011 | 2002 Honda Accord
Jun 05, 2010 | 2003 Honda Accord
Mar 20, 2010 | 2003 Honda Accord
Sep 29, 2009 | 1988 Honda Accord 4 Door
Mar 16, 2009 | 1989 Honda Accord 4 Door
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: