Question about 2010 Toyota Tundra

1 Answer

Alternator location on a 2010Toyota tundra - 2010 Toyota Tundra

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

If you open the hood standing in the middle of truck, facing towards the windshield, split the motor in half, the alternator should be left of center of motor, it is round, it has a pulley it may have 1 or 2 belts or 1 serpentine belt, if it is a serpentine belt you are going to need a tool call serpentine belt tool kit, long bar with a socket on the bar, set of different sizes of sockets to fit the spring load device that hold the serpentine belt in place. on top of alternator is a wire connector with 2-3 wires that connect to the starter and battery, and bolt with connector for ground that is bolted on the back side of alternator, 2-3 bolts that hold the alternator in place, remove bolts, take it auto parts store have them test it before buying a new one.

Posted on Apr 22, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW I CAN TAKE OUT ALTERNATOR ON 2008 4X4 TUNDRA CREW MAX, TOYOTA?


very carefully,if things are in the way,then you need to move them

May 22, 2015 | 2008 Toyota Tundra

1 Answer

How do i replace the alternator on a 2000 tundra 4.7L 4x2 non serpentine configuration


I presume the serpentine belt is in the way. First, disconnect the battery terminal. Then make sure the serpentine belt diagram is readable and remove the serpentine belt. Then release the tension on the alternator belt and remove all the bolts and wiring.

Nov 20, 2014 | 2000 Toyota Tundra

1 Answer

2000 tundra engine doesn't start only one "click" sound


Sounds like battery is dead or low on charge possibly from bad battery connections or bad alternator. Check cranking and charging systems.

Aug 14, 2014 | 2000 Toyota Tundra

1 Answer

2000 Tundra why I only hear click sound and nothing start the engine ?


The battery is probably dead and/or bad. Could be corroded battery cable connections. If not any of these then the alternator might be bad (not charging the battery) or the voltage regulator or start relay could be the problem. The start might be bad also.

Aug 14, 2014 | 2000 Toyota Tundra

1 Answer

Tried to start, it goes click one time.


It sounds like a faulty alternator, the alternator uses the momentum of the running motor to charge your battery. if this is faulty than the battery will not get charged while running and go flat. use a multimeter to test the battery. or try to jump start the car, if it starts when jump started than you know its an alternator.

Oct 08, 2012 | 2004 Toyota Tundra

1 Answer

How to replace alternator on 2007 toyota tundra


Hi. Please see procedure below:

Determine which alternator your Toyota Tundra will need. You'll want to be sure the new alternator is compatible with your Tundra's engine. Models built from 2000 to 2004 have a 3.4 L or 4.7 L engine. Models made from 2005 to 2006 offer options for a 4.0 L or 4.7 L engine. Starting in 2007, the Tundra is available with 4.0 L, 4.7 L and 5.7 L engines.

Disconnect the negative battery cable with a socket wrench. Remove the gravel shield if you need to access the alternator from under the car. Remove the electrical connector and unfasten the retaining nut on the alternator terminal with a socket wrench. This will allow you to remove the battery terminal wire.

Unfasten the lock nut, pivot bolt and adjusting bolt on the alternator with a socket wrench. Remove the drive belt and take the alternator off the vehicle.

Install the new alternator assembly. Use a torque wrench to tighten the lock nut to 25 ft. lbs. and the pivot bolt to 38 ft. lbs. Attach the adjusting bolt.

Connect the electrical harness and battery terminal wire to the alternator and fasten the retaining nut to the alternator terminal with a socket wrench. Install the gravel shield if you removed it. Replace the drive belt and restore it to the proper tension. Reconnect the negative battery cable with a socket wrench.

Thanks!

May 25, 2010 | 2007 Toyota Tundra

1 Answer

Anyone have a picture of the alternator on an '03 Tundra V8? Trying to check output - losing battery V overnight.


Start the engine and check the voltage at the battery with a volt meter. It should read from 13.5 to 16 volts. If it reads out of this range the alternator is defective. If the output of the alternator is ok, then you have something that is on and is drawing power overnight. Dome light, under hood light, glove box, brake light, etc. It can also be a relay that is stuck as in a P/W relay.

Dec 27, 2009 | 2003 Toyota Tundra

Not finding what you are looking for?
2010 Toyota Tundra Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...