Question about 2010 Nissan Qashqai 1.5

Open Question

2010 nissan qashqia 1.5 dci want to know how to remove the instrument cluster to change the colour of the bulbs..

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 90 Answers

SOURCE: 1991 N14 Pulsar SSS, disconnected

HI
IT IS FUNNY ??????????
CHECK FOR FUSE BURN OR LOSS CONNECTION ??

WITH MY BEST WISHES

Posted on Jul 23, 2008

  • 17 Answers

SOURCE: '01 volvo v70 t5 instrument bulbs

Talking the cluster out of the dash isn't easy, Thats why the Dealer wants so much to do this SIMPLE task. You can do this yourself if you have the time and the patience. remember where all the screws go. some screws are in glove box and others are inside of vents when u can access by gently prying the side of the vent cover with a small flat screwdriver, then look around the cluster fro screws oh and don't forget the screws under speaker covers on dash.

Posted on Apr 08, 2009

  • 10 Answers

SOURCE: how do i remove the instrument cluster on my 2000

Ok here is how you do it.

Tools Required:
Flashlight
Ratchet or spinner handle
7mm socket
8mm socket
Ford DIN radio removal keys
ZipLoc bags, cups or some other way to store bolts
T15 torx bit (column shift only)
Automotive trim removal tools (helpful but not necessary).

(optional for odometer adjustment)
T15 torx bit
very flat straight edge

ICP=integrated control panel, the radio and HVAC controls.

Obviously it's up to you, but taking your ratchet and a 7mm bit to the negative terminal on the battery may be a good idea considering you will be working with electronics. Make sure you have turned off all lights; keys are out of the ignition, before you disconnect the terminal.

First, take the 8mm socket and attack the two screws up under the steering column. They are gold/copper color and near the OBD-II port. You'll feel them if you don't want to bend down at see them. Once you remove them, give the kick panel a few tugs and it should give way. There are some clips holding it on as well. If you are stuck halfway, you might it useful to use the flashlight to look around to see what's holding it on.

Next, removing the radio involves using the two Ford DIN radio removal keys. Insert both of them into the slot and push them in until they are sticking out about 1/2 to 3/4 inch. Then take your thumbs and push the inside side of each key outwards and start pulling...the ICP should pop right out. Keep pressure on pushing the keys in as well, so the radio doesn't get stuck. Column shifter people will find it ideal to fold out the console to rest the ICP surround and the ICP. You can also disconnect the cabling entirely if you'd rather. Floor shift models will find it ideal to put their keys in, turn the key to "RUN" and place the shifter in "1". Floor shift models can also go ahead and tilt the wheel all the way down as well.

Now you should see 5 screws holding on your ICP bezel. Take the 7mm socket and remove each of those 5 bolts. There are also two bolts of the same size behind the ashtray. Pull the ashtray out, push down on the tounge, and pull the ashtray out. Remove those 2 screws as well. I used a cup to dump all the screws into. A ZipLoc bag is a good idea as well. Grab around the ICP opening and give a good tug. Plastic clips embedded in the ICP surround and those screws are holding it in place. There is a clip holding the ICP surround next to the kick panel you previously removed, that can be difficult as well. *NOTE* You can also leave the screws in the ashtray attached and fold the ICP surround down, but it's best not to do this multiple times, you can only flex the metal tabs so much.

Next, remove the two 7mm bolts in the top of the instrument cluster surround. Now, column shift models (floor shift models have already done this), go ahead and put your key in the ignition, turn it to the "RUN" position and shift down into "1". Also tilt the wheel all the way down. There is one 7MM screw holding that bezel on to the top-left of the ICP surround area . It's right below the row of warning lamps on the far right of the instrument cluster. It holds the upper instrument cluster surround to the dashboard.

Now it's time to start pulling off the upper instrument cluster surround (the one with the vents, light switch, etc). A metal trim remover is not as ideal as it can put blemishes in your dash. Harbor Freight sells a kit of 6 plastic trim removal tools for about $5. They won't scratch and harm the soft upper dash as much. Don't be afraid to try griping at different angles, just requires a little pulling. Use the tool accordingly. Once you have it loosened out of the dash, you have one more step before you fully remove it.

Unfortunately, the G4 headlight switch knob does not pop off as easily as the G3. You can either stick a small, flathead screwdriver (wrapped in a cloth) in the slot between the dash and the bottom of the light switch. Then start prying away at it. OR (the easier method) Once you have popped out the upper dash trim, you should be able to push the headlight switch out through the opening. Disconnect the cables and set the headlight switch aside.

Now you can fully remove the upper dash trim. Start by pulling on the upper part that goes around the instrument cluster. Be warned there is a plastic wedge shapped clip in the middle. It will require bending of the plastic to make it pop out correctly. If you have a leather wrapped wheel, be careful not to scratch or cut the leather. The upper dash trim requires manipulating the shifter position (column shift models) and swiveling the trim around the steering column and pulling up on it towards the roof of the car. Eventually it will pop out.

Now you should have a good view of your instrument cluster. There are 4 7mm screws holding it in place. The cluster rests on two small knobs on the bottom as well. Go ahead and remove those bolts. There are two, 2" long connectors that go into the back of the cluster. They are at opposite ends near the top of the cluster. They have clips on the top of the connectors. Push down on it and uninstall them (not an easy task, but doable. If you are a floor shift model, continue on. Otherwise...if you are a column shift model, this is an ideal time to remove the PRNDD1 indicator. This requires the T15 torx bit. There are two small T15 on opposite ends of the bottom of the PRNDD1 indicator. Be careful and don't let the cable drop behind the dashboard.

Go ahead and remove the cluster. If you need to take your keys with you, regardless of shifter position, you can put the car in park and take your keys out.

----------Instrument cluster disassembly and odometer correction-----------
This would be a good time to check all the lightbulbs, make sure they are not blown. Flip the cluster over. Take some needle nose pliers, grasp one of the lighted areas (they are marked and color coded). The big black ones are the background lighting, the smaller ones are for the indicator/warning lamps. Twist the holder counter clockwise, then pull up. You should have a view of the light bulb.

.

--------END Cluster/Odometer----------
Next, reattach the upper trim panel, inserting the clip in first. As with last time, play around with the shifter in various positions(column shift) and make sure you get that 2" trim piece BEHIND the shifter. Once you have it set in place, go ahead and insert the two screws holding the panel into the upper dash. Reconnect the headlight switch and push it back into the dash. Insert the screw below the instrument cluster. Next reattach the ICP trim surround. Insert those 5 screws. Reinsert the kick panel below and insert the two 8mm screws. Pop back in the the ICP (with the radio DIN tools removed). Congrats, should be all back in place AOK.

Posted on May 30, 2009

  • 169 Answers

SOURCE: How do I remove the ABS bulb from the instrument

if light is on you got a problem pull code & fix most problems are wire or sensors hard parts you could get reman or used

Posted on Aug 30, 2009

  • 83 Answers

SOURCE: Need to replace instrument cluster/AC bulbs

Hello, You can obtain a 2004 Ram Factory Service Manual with all of that information available from Promanuals.net. The reason why it may be so important is because right before the removal instructions the service manual has diagnostic instructions to try. There are numerous pages on removing the instrument cluster, and cluster bezel.

(1) Disconnect and isolate the battery negative
cable. (For Airbag)

(2) Remove the cluster bezel from the instrument
panel. (Refer to 23 - BODY/INSTRUMENT PANEL/
CLUSTER BEZEL - REMOVAL).

(3) Remove the four screws that secure the instrument
cluster to the instrument panel structural support
(Fig. 5).

(4) Pull the instrument cluster rearward far
enough to access and disconnect the instrument
panel wire harness connectors for the cluster from
the connector receptacles on the back of the cluster
housing.

(5) Remove the instrument cluster from the instrument
panel.
9e8a042.jpg

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Instrument cluster stopped functioning is there a fuse or relay


Instrument cluster removal - Mercedes - YouTube

? 2:09
www.youtube.com/watch?v=Z7vM78b5cOw
Jan 15, 2010 - Uploaded by Lim Lai Aik my instrument panel lights not working.how can I change the bulbs? thanks ... 1972 Mercedes-Benz 600 Kompressor - Jay Leno's Garage - Duration: 18:56. by ... How to convert Mercedes R129 SL ,w124 dash gauge lighting to LED ... Part 1/5 Mercedes S-Class W220 Instrument Cluster Repair - Duration: ...

Sep 24, 2015 | 1992 Mercedes-Benz SL-Class

1 Answer

Why would only 1/2 of the instrument panel light up? And how can I fix it to light up


Its just some bunt out bulbs. Depending on the year of your car, you either can just reach behind the dash and replace the bulbs, or more likely the instrument cluster will need to be removed and the bulbs replaced. A general rule of thumb on this type of repair, do em all and save another headache later. Like the old saying goes, an ounce of prevention is worth a pound of cure. Consult a repair manual for proper removal instructions of the instrument cluster.

Nov 02, 2012 | Nissan Cars & Trucks

1 Answer

How to replace bad bulbs in a 2003 nissan 350 instrument cluster?


you have to remove most of the dash then remove cluster from dash they attach threough rear of board

Aug 29, 2012 | 2003 Nissan 350Z

1 Answer

My 89' ford ranger will not pass smog here in socialist california. it has passed for 15 years since i've had it. the new machines indicate that the check engine light is'nt operating. i...


Hi, it's possible the bulb is burned out or not making good contact with the circuit board. It should come on during the bulb check when you first turn the key on. Pull out the cluster and check the bulb. If it's good, see if you can clean the contact surfaces to get it working again. Or, move to another state where they don't worry about stupid things like a light bulb.

REMOVAL & INSTALLATION

See Figures 1, 2, 3, 4, 5 and 6


jturcotte_2200.gif

Fig. Fig. 1: To remove the instrument cluster, first remove the trim panel by removing the lower fascia panel


jturcotte_2201.gif

Fig. Fig. 2: With the lower fascia moved aside, remove the lower trim panel attaching screws ...


jturcotte_2202.gif

Fig. Fig. 3: ... as well as the upper attaching screws


jturcotte_2203.gif

Fig. Fig. 4: Then pull the entire instrument trim panel from the dash board


jturcotte_2204.gif

Fig. Fig. 5: Exploded view of the instrument cluster


jturcotte_2205.gif

Fig. Fig. 6: Rear view of the instrument cluster wire routing and connections

  1. Disconnect the battery ground cable.
  2. Remove the two steering column shroud-to-panel retaining screws and remove the shroud.
  3. Remove the lower instrument panel trim.
  4. Remove the cluster trim cover from the instrument panel by removing the eight screws.
  5. Remove the four instrument cluster to panel retaining screws.
  6. Position the cluster slightly away from the panel for access to the back of the cluster to disconnect the speedometer.

If there is not sufficient access to disengage the speedometer cable from the speedometer, it may be necessary to remove the speedometer cable at the transmission and pull cable through cowl, to allow room to reach the speedometer quick disconnect.
  1. Disconnect the wiring harness connector from the printed circuit, and any bulb-and-socket assemblies from the wiring harness to the cluster assembly and remove the cluster assembly from the instrument panel.

To install:
  1. Apply approximately 1 / 8 in. diameter ball of D7AZ-19A331-A Silicone Dielectric compound or equivalent in the drive hole of the speedometer head.
  2. Position the cluster near its opening in the instrument panel.
  3. Connect the wiring harness connector to the printed circuit, and any bulb-and-socket assemblies from the wiring harness to the cluster assembly.
  4. Position the cluster to the instrument panel and install the four cluster to panel retaining screws.
  5. Install the panel trim covers and the steering column shroud.
  6. Connect the battery ground cable.
  7. Check operation of all gauges, lamps and signals.

Sep 07, 2011 | 1989 Ford Ranger

2 Answers

Can you replace the lights behind the instrument panel? the entire right side of my dash is no longer lit up


Sure Can

Buy bulb number 161

Instrument Cluster Finish Panel

Removal and Installation

1. Remove three screws along the bottom of instrument panel steering column cover (04459). Pull on instrument panel steering column cover to unsnap the three clips across the top of the instrument panel steering column cover. Remove the lower instrument panel steering column cover.

1996fp.gif

2. Remove four screws retaining the steering column shrouds (3530) together and remove the steering column shrouds.

3. Remove the three screws retaining the bottom of the cluster instrument panel finish panel (044D70).

4. Remove two screws retaining the cluster instrument panel finish panel above the instrument cluster face.

5. Pull cluster instrument panel finish panel to unsnap one retaining clip above the LH A/C register (19893).

6. Pull cluster instrument panel finish panel to unsnap three retaining clips on the RH side vertical edge.

7. Pull cluster instrument panel finish panel away from instrument panel (04320) far enough to disconnect the wiring connector(s).

8. To install, reverse Removal procedure.

I've never done #2, and #1 refers to the panel below the steering column. To remove it completely, pull it towards the driver's seat. There may be retaining clasps on it also.

May 25, 2011 | 1996 Ford Thunderbird LX

1 Answer

How do you change the instrument light bulbs?


you have to take out the instrument cluster and then twist the hold down a half turn and pull to remove bulb and hold down from cluster then remove bulb from hold down replace with working bulb and reverse to install working bulb then reinstall instrument cluster.

Feb 13, 2010 | 2003 Kia Sedona

1 Answer

2001 Nissan Micra replace fuel gauge bulb


need to remove instrument cluster to get to globe from the back,should be mounting screws in front to remove around instruments

Oct 21, 2009 | Nissan Se R Cars & Trucks

1 Answer

Need to replace instrument cluster/AC bulbs


Hello, You can obtain a 2004 Ram Factory Service Manual with all of that information available from Promanuals.net. The reason why it may be so important is because right before the removal instructions the service manual has diagnostic instructions to try. There are numerous pages on removing the instrument cluster, and cluster bezel.

(1) Disconnect and isolate the battery negative
cable. (For Airbag)

(2) Remove the cluster bezel from the instrument
panel. (Refer to 23 - BODY/INSTRUMENT PANEL/
CLUSTER BEZEL - REMOVAL).

(3) Remove the four screws that secure the instrument
cluster to the instrument panel structural support
(Fig. 5).

(4) Pull the instrument cluster rearward far
enough to access and disconnect the instrument
panel wire harness connectors for the cluster from
the connector receptacles on the back of the cluster
housing.

(5) Remove the instrument cluster from the instrument
panel.
9e8a042.jpg

Oct 01, 2009 | 2004 Dodge Ram 1500

1 Answer

My 1987 nissan 300zx's digital instrument cluster wnt light up. why?


nissan's have lighting problems on clusters and ac controllers. remove cluster and take it apart, replace bulbs, you can get them from radio shack. its an diy fix, will take about 1 and a half hours and will cost about 10 bucks at most!

Jul 18, 2009 | 1987 Nissan 300ZX

Not finding what you are looking for?
2010 Nissan Qashqai 1.5 Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...