Question about 2002 Dodge Neon
The transmission wont change speed
Posted by Anonymous on
Those codes indicate a transmission and or pcm problem, check the fluid for condition it fluid is burnt, you will need to do a transmission repair or rebuild
Posted on Oct 13, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: po605 and po700
p0700 is a generic trans. code, so the problem if it is in the trans. would require further trans diag. so i would scan trans specific codes first. but in most cases when a chrysler tells you it is an internal controller fault you can believe it. just make sure which controller it is telling you has a fault!
Posted on May 19, 2009
I dont think reflashing will help this, the first thing that comes to mind is the output speed sensor, i would replace the sensor and reset the codes and go from there, the out put speed sensor can make all this codes come up, the po720 is the out sensor, when this goes bad the trany doesnt know when to shift gear at the right time so if it shifts at the wrong time you get the other codes like the po732 2nd gear error or po605 internal trans controller, replace the sensor first and see what happens after that, good luck and hope this helps.
Posted on Jul 07, 2010
that is the transmission control module is not reading. did you replace it. it is in the front of the transmission
Posted on Nov 12, 2012
Tips for a great answer:
Nov 11, 2012 | 2001 Dodge Caravan
Aug 27, 2011 | 2001 Chrysler PT Cruiser
May 10, 2011 | Chrysler Concorde Cars & Trucks
Nov 29, 2010 | 2000 Chrysler Grand Voyager
Jul 07, 2010 | 2002 Dodge Durango
May 18, 2009 | 1999 Dodge Caravan
95 people viewed this question
Usually answered in minutes!