Question about 1994 Oldsmobile Cutlass Ciera
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
Posted on Jan 20, 2009
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Posted on Aug 17, 2009
Testimonial: "Thank you very much for your advice and time!"
Since your cat was replaced you should be looking at fuel problems...even gas cap seal....check fuel pressure,fuel regulator,and evap system.>canister or purge solinoid,o2 senser...high nox is caused by the cat or fuel problems on these engines...high pressure in the combustion chamber...lean condition>air leak on hoses,or high compression caused by carbon build up ...there is no EGR on this car so don't waste time looking for it...hope this points you to your problem
Posted on Nov 08, 2010
Tips for a great answer:
Aug 19, 2017 | 1994 Honda Accord
Oct 17, 2017 | 1993 Ford Taurus
Mar 21, 2011 | 1993 Oldsmobile Cutlass Ciera
Mar 10, 2011 | 1990 Oldsmobile Cutlass Ciera
Nov 30, 2010 | Toyota Paseo Cars & Trucks
May 27, 2010 | 1994 Oldsmobile Cutlass Ciera
May 17, 2010 | 1991 Honda Accord
Mar 14, 2010 | 1991 Oldsmobile Cutlass Ciera
Mar 12, 2009 | 2002 Toyota Sienna
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: