Question about Chrysler Cars & Trucks

Open Question

Stuck spark plug in a Chrysler Sebring 2004 - Chrysler Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: how do I change rear spark plugs on 2.7 six cyl.

I got all out except the rear driver side plug the boot on that plug won't clear the wiper motor pan ... only way I can see is removing rear rocker cover first.. you don't remove plugs from under the car... anyone else see another solution

Posted on Nov 24, 2009

Ad
01fordeb
  • 1033 Answers

SOURCE: oil sending unit on 2004 chrysler sebring V6

Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Posted on Jan 03, 2010

jlisagearhea
  • 412 Answers

SOURCE: Where is the fuel filter located on a 2004 Chrysler Sebring Sedan

Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!

Posted on Apr 29, 2010

ZJLimited
  • 17970 Answers

SOURCE: 1999 Chrysler Sebring Convertible code P1495. I

Code 1495 = Leak Detection Pump Solenoid Circuit

Remove the connector from the solenoid (should be on the back wall, just to the drivers side of the air-hat). You will have the solenoid to check and the harness. What you want to measure is the voltage coming from the harness and the resistance of the solenoid.

Turn the key to the "ON" position but do not start the motor; the voltage at the connector should be at least 10V or more,.now, check the resistance of the solenoid (should be around 35 ohms).

Hope helps.

Posted on Jun 03, 2010

leethedeuce
  • 4472 Answers

SOURCE: location of radiator drain plug on 2004 Chrysler

should be on passenger side look up from the bottom and you should find the petcock valve. A work around is removing the lower hose.
Thanks,
Lee

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Chrysler Sebring cranks and won't start. I have changed the plugs, wires, and distributor. I have a 3.0 engine


Standard practice is check for spark at each plug when you crank. If you're getting spark, then check for fuel getting to cylinders.

Feb 06, 2017 | 2004 Chrysler Sebring

1 Answer

How do you remove a stuck spark plug on a Chrysler Sebring 2004


There are several things to try. First is that you should try a penetrating oil on the threads overnight. Run the engine to get it warm and then remove the plugs. If it takes brute force it is no big deal because the heads need only enough thread to get compression. All heads that are aluminum should have an anti seize compound on the plugs when they are installed. If the threads are totally shot you can use a heli coil to repair them.

Apr 18, 2015 | 2004 Chrysler Sebring

1 Answer

Chrysler 2004. Sebring its backfire


change spark plugs give tune up

Dec 06, 2011 | 2004 Chrysler Sebring

1 Answer

Changed the plugs in a 2.7l sebring (2004) and now getting the check engine light with error code p0300. Engine idle at start up also continues to accelerate.


Hallo
There is something wrong with one of the spark plug or you did not put all the cables on the plugs to the end. Or one of cables or ignition coil(s) is damaged. P 0300 = missfire detected

best regards
Marko

Oct 02, 2010 | 2004 Chrysler Sebring

2 Answers

How many spark plugs do the 2001 chrysler sebring have and how do i get to them all to change?


THE CHRYSLER SEBRING HAS 2.5 - 2.7 - 3.0 ENGINES THEY ALL HAVE 6 SPARK PLUGS. ON THE 2.5 AND 3.0L ENGINES TO GET TO SPARK PLUGS YOU HAVE TO REMOVE UPPER INTAKE MANIFOLD FOR ACCESS THE SPARK PLUGS IN THE REAR CYLINDER BANK.THE 2.7L ENGINE WITH COIL OVER PLUG DISCONNECT THE COIL CONNECTOR AND REMOVE THE BOLTS THEN LIFT THE COIL OFF FOR ACCESS TO THE SPARK PLUG.

Feb 24, 2010 | 2001 Chrysler Sebring

1 Answer

Oil sending unit on 2004 chrysler sebring V6


Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

Jan 03, 2010 | 2004 Chrysler Sebring

1 Answer

Is it difficult to change the spark plugs on a 2004 Chrysler Sebring Convertible V6


Yes. Yopu must remove the plenum, which means a new gasket.

The plug wires go down into the valve covers. The circular gaskets there often leak, so I would replace the wires and gaskets around them at the same time because it is all exposed.

Dec 01, 2009 | 2004 Chrysler Sebring

1 Answer

Illustration of where spark plugs go on a 2006 chrysler sebring


Easiese solution is to trace the spark plug wires to the individual locations.

Jul 28, 2009 | 2006 Chrysler Sebring

1 Answer

How do you get to back spark plugs


You'll need to remove the intake plenum. From there you can access the plugs and wires.

May 26, 2009 | 2004 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...