Question about Toyota Cars & Trucks

Open Question

Where is the horn relay located on an 1981 toyota p/u?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 36 Answers

SOURCE: 99 CAVALIER HORN RELAY LOCATION

If your horn isn't working and it isn't the horn itself the next thing to check is the horn wire in the steering wheel under the air bag. The little clip breaks off in time and the horn wire pops out. To repair you can remove the wheel and replace the part but I usually grind in a new notch in the old plastic and re attach the wire and it will work again.
Test the horn itself first. Just remove the connection to the horn and attach 2 wires to a live battery and tough the 2 sides of the contacts on the horn. If it blows the horn is good. If not replace the horn before you go any further.

Posted on Aug 23, 2009

  • 132 Answers

SOURCE: Ford 1981 KA Laser horn fuse

LOOK IN THE FUSE BOX UNDER THE DASH ON THE DRIVERS SIDE

Posted on Nov 14, 2009

  • 183 Answers

SOURCE: 1987 toyota 4 x 4 horn stopped working. New horn

there should be a relay switch in the main fuse box under the hood 

Posted on Mar 07, 2010

  • 47 Answers

SOURCE: Where is the horn relay

Toyota does not use a relay for horn operation. Power to the horn is provided by the 15 amp Haz-Horn fuse. The horn operation is controlled by ground through the horn switch (button) on the steering wheel.

Posted on Dec 29, 2010

  • 1 Answer

SOURCE: location of the horn relay on a 2000 zx2...

I would like to find the location of the horn relay.

Posted on Jul 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i find my horn relay on my 2006 Toyota hilux


you have to register for these forums.

  • NewHilux.net • View topic - Horn relay www.newhilux.net/phpbb/viewtopic.php?t=10814
    • LAST UPDATED: 2014-08-26
    • 6 POSTS
    • FIRST POST: 2011-08-23
    NewHilux.net the Ultimate resource to the late model Toyota Hilux Ute ... Anyone know where the horn relay is ... When my horn died it was also clicking but the ...
  • horn relay?? - Hilux Surf Forum hiluxsurf.co.uk/showthread.php?t=74439
    • LAST UPDATED: 2012-01-31
    • 5 POSTS
    • FIRST POST: 2012-01-05
    guys im trying to fit a new more powerful horn i need to replace the relay does anyone know where ... FIRE UP THE HILUX ... Horn Relay Located Right hand side ...
  • Feb 05, 2016 | Toyota Cars & Trucks

    1 Answer

    Location of the horn relay on a 2004 Toyota Sienna


    I go through many different steps in troubleshooting the horn on a 2004 Toyota Sienna on this webpage: John Fixes Stuff Horn Won Work How to Troubleshoot The Horn on 2004 2010...

    Jul 17, 2014 | 2004 Toyota Sienna

    1 Answer

    2000 Toyota Tacoma Horn Relay location needs replacing


    1- The HORN fuse is located in the fuse panel on the driver's side under the engine hood. Of course, if it is "blown" replace with the SAME size or smaller and retest the horn.
    2- Verify the horn itself (isolated) using one wire attached to the Main Battery + (POSITIVE) to the spade terminal on the horn. The horn can be accessed after carefully unclipping the fasteners connecting the front grill to the radiator area- just be careful- work slowly. The horn is naturally grounded to the vehicle frame.
    3- If the horn sounds with the direct bypass voltage test move to the cab. when you depress the combo horn pad/airbag listen carefully for the relay behind the left under-dash area. If you hear it, then the relay is "closing" but it still may be bad or the voltage from the horn relay is not getting to the horn. I would replace the relay. However, there may still be a wiring problem to the horn.
    4- The Horn Relay for the '00 Toyota Tacoma V6 4WD I worked on was BEHIND the cabin fuse panel on the far left driver's side (oh thanks guys). I went to the trouble of pulling down this relay/fuse block- it was not exactly "easy" but I am not a beginner and had the tools and my curiosity and sleuthness prevailed. If the new relay does not fix this issue my next step is to replace the wire from that relay to the horn. Again, not easy but not impossible either. Take you time, use the right tools and materials & check your work. The only other option was mentioned earlier- drop in a new momentary switch (lighted?) into the dash and run a new wire. I would NOT use switched power so it can be used without the vehicle running... I think it is safer. This is a view of the interior panel dropped down. One of the relays can be seen- the grey cube with a empty relay socket just to the right. Why they put these here- is anyone's guess.
    dd4132f7-8aa0-48cf-bfcf-8b105e59429b.jpg

    Feb 18, 2013 | 2003 Toyota Tacoma

    1 Answer

    Toyota horn relay switch location


    I have a 2013 toyota yaris le bought a oe universal horn apparently the horn wasnt getting good ground so i bought a wire added it to the battery and the horn went off i was happy until i realized it wouldn't stop. Wherr is the relay to make it only work when touched. Help

    Dec 26, 2012 | 2009 Toyota Yaris

    1 Answer

    Where is the headlight flasher relay located on a 1981 toyota pickup


    If there is a relay, it's probably inside the switch. Your headlights have fuses, both left and right (my '87 celica does). If they are good, and bulbs aren't burnt out, then probably the switch is bad.

    Feb 17, 2012 | 1992 Toyota Pickup

    1 Answer

    What wire ( yellow or blue ) powers the horn on a 1981 Ford F-150


    The horn button supplies a ground to the horn relay.Start by pulling the plug at the base of the column,see if you can get a ground on one of the pins from the column when you pus the button.Or find the horn relay,and do the same test from there.You should find 12v on one on the relay socket pins,a ground on one(this will be the wire to the horn)and a ground on the 3rd pin when you press the horn button.

    Jan 02, 2012 | 1981 Ford F 150

    1 Answer

    Whear is the horn relay for toyota corolla 1999


    The horn relay is under the hood in the main fuse/relay box, remove the cover, the relay locations and fuses are marked on the inside.

    Aug 30, 2011 | 1993 Toyota Corolla

    1 Answer

    Looking for horn fuse on toyota sienna 1998


    Hello Edelways.
    The horn fuse and the horn relay are in the left front under hood fuse/relay box.
    This is a location diagram and the inside of the box. Sorry about the size of the diagrams. They don't allow us much space here. The fuse and relay should be marked in the fuse box lid.

    kiltylake_183.gif


    kiltylake_182.gif

    Here is a wiring diagram just in case you need it.
    kiltylake_181.gif
    If you need more assistance to locate, please ask me in comments.
    Thank you for using FixYa.
    KL

    Feb 04, 2011 | 1998 Toyota Sienna

    1 Answer

    Where is the horn relay located on the 1988 Toyota pick-up?


    Toyota does not use a relay for horn operation. Power to the horn is provided by the 15 amp Haz-Horn fuse. The horn operation is controlled by ground through the horn switch (button) on the steering wheel.

    Dec 29, 2010 | 1988 Toyota Pickup

    1 Answer

    Horn and cigar lighter not working on 1982 corvette - need wiring diagram


    Visually inspect horn make sure its not corroded and wiring is on it tight. Then use a voltmeter and when horn button is depressed 12v should register on the meter. If 12v are there and horn doesn't sound the horn is defective. If 12v does not make it there then its either the relay or clock spring (located inside steering wheel) most likely. A visual inspection should pretty much do it with the clock spring (corrosion ,wear of contacts). Relay must have B+ going to it at all times and coming out only when horn is depressed. good luck

    Oct 27, 2009 | 1981 Chevrolet Corvette

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    28 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8152 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...