Question about Ford Cars & Trucks
This looks like a motor mount. you will have to support the engine with a jack and unbolt the bolts of the mount and lift the motor high enough to remove old mount and install new.
Posted on Apr 18, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like the catalytic converter has gone bad. What happens is you car as you drive will lose power, smell like rotten eggs and stall out. The reason is, the cat. is plugged up and cannot let the exhaust out of the tail pipe like it should. The exhaust is staying in the engine causing it to stall out and loose pwer.
Posted on Jun 12, 2008
SOURCE: need new car battery
Capacities and specifications
MOTORCRAFT PART NUMBERS
Component 2.0L SPI engine BXT-40R
2.0L Zetec-E engine BXT-96R
The number one cause of the battery drain you describe is the battery itself. Remove the battery from the vehicle and clean the battery exterior and the area the battery sits in with baking soda mixed with water. Clean the battery cable conections and re-install the battery. While it's possible something is staying on or activating and draining the battery that's a much less frequent occurrence. You should start by having your starting and charging system checked. If you express to the shop that you're concerned that something may be draining the battery while the vehicle is off, they should also perform what's called a "draw test."
While some items (such as the clock) remain on even though the vehicle is off, their power consumption is low. Performing a draw test will tell the technician how much current is flowing while the vehicle is off. It should be less than 50mA. Anything 100mA or above is cause for concern. Look at, of course, dome light & courtesy lights, glove box light, trunk & hood light. Also in very rare instances you may have a power window switch stuck in the up position. Even rarer would be a power door switch stuck. I would suspect you need a new battery, especially if the battery is over 3 years old.
Posted on Dec 15, 2008
Ebay has the tool for removal cost $1 plus shipping. this tool is for the 2 holes on left and right side of radio face fit tool in then push alittle out worad and pull. Follow aftermarket instructon on install.
Posted on Dec 28, 2008
Hi did you do a continuity check check if there's a wire shorted or open you'll need a volt meter check if the wires on the crank sensor going to the control module and also the one from the coil to the module there has to be a shorted or open wire check this and get back to me good luck
Posted on Sep 04, 2009
Tips for a great answer:
Dec 19, 2016 | Ford Taurus Cars & Trucks
May 15, 2016 | Cars & Trucks
Apr 02, 2014 | Ford Taurus Cars & Trucks
Jul 11, 2012 | 1999 Ford Taurus
Jul 30, 2011 | Ford Taurus Cars & Trucks
Feb 25, 2010 | Ford Taurus Cars & Trucks
Dec 10, 2009 | 1998 Ford Taurus
Sep 20, 2009 | 1997 Ford Taurus
77 people viewed this question
Usually answered in minutes!