Question about Cars & Trucks

1 Answer

What are the timming marks? - Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 352 Answers

You will have to post make, model and yer to get a really good answer.

Ignition marks might bee a deep "scratch" on the fly wheel that has to match to a certain mark on a metal tab near fly wheel.

Gear timing marks are usually a deep punch mark near the gear teeth.

Hope that helps some.

Posted on Apr 18, 2015

Testimonial: "My husband just replaced my timming chain GrayBread32301 on my 2003 Pontiac grand am 34 v-6 he's trying to set timming back the way it should be can you help."

  • graybeard32301 Apr 18, 2015

    I would suggest getting a subscription at www.alldatadiy.com for your car. It will cost a bit under $30 for a 1 year subscription and will get you to the factory manual and all the manual updates for that car and engine. I could not locate a picture or other reference on-line that I would trust. Personally I have a subscription for my car and my truck. It is the first pace I go before starting a repair. Good luck. Sorry I can't give you step by step help.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need picture of timming marks


has the timing chain been replaced

Mar 27, 2014 | 1984 Datsun 2.8

1 Answer

Can not find timming marks on cam gears


Ther are none. It takes a tool to hold the cams in place while the valve cover is removed. Get a chilton book from the library.

Nov 03, 2009 | 2001 Ford Focus

1 Answer

2002 Hyundai Acent 1.5 sohc,need info on cam timming


didnt you mark it before you removed the old belt??

Nov 01, 2009 | 2002 Hyundai Accent

1 Answer

Cam shaft timming marks 1999 Daewoo 1.6 liter


there is a special tool to hold gears in correct place on some of these models, but you can hold one cam at a time with a spanner then feed belt on exhaust cam then inlet cam gear
get someone to hold gears in place while you feed belt on.
the inlet cam is more prone to turn off mark more than exhaust.
if you have tensioner that needs retaining pin in when installing
you fit belt while aligning timming marks
fit tensioner as last spot to feed belt on with retaining pin in adjuster
get correct tension on belt by turning water pump so that you can flex (turn) belt 90 degrees only just while using finger and thumb
tighten water pump check flex
check all timing marks are correct
remove retaining pin from auto tensioner
turn motor over a couple of turns by hand observing tensioner arrow should hover around V mark and that all timing marks align up again(after one complete turn)

Aug 02, 2009 | 1999 Daewoo Lanos

1 Answer

Timing marks


you should have timming marks on the front engine block. if you see it you will need a timming light to set it very cheap to buy. if you do not see any timming marks and you have a distributer losen it a little but with the car running. now with the car running turn the distruber left or right until you hear and feel the car idle high. once you feel it idle low go back up until it idle high and keep it there and tighten the distruber back. turn the car off and try starting it back up. it should start right on time with the correct timming and idle. good luck

Jul 08, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

I need to know how to set the timming marks on the 1.6 double over head cams to replace timming belt


timming marks on cams face each other 3 and 9 o clock crank mark at about 6 o clock mark in cover and sump auto adjuster arrow should be in v mark to set this requires turning water pump by loosening water pump bolts slightly be warned some times this causes pump o ring seal to leak if turning.

May 19, 2009 | 2000 Daewoo Lanos

1 Answer

Timming without marks on belt how to set


Get a new belt with marks on it. They're 25 bucks. easy fix. Next time mark it b/4 you take it off.

May 08, 2009 | 1992 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...