Question about Cars & Trucks

2 Answers

Engine coolant coming on and staying but water is full can u still drive it

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,554 Answers

That light is the sensor for the water bucket that you have filled up as long as its full that is what the light is for . disconnect the connector at the top of the water bucket cap ,if you dont want to see that idgit light as its called .
any idjit knows a car runs on water an oil an fuel so says the lights.
the sensor is stuck on tattle .

i wanted to make this funny but i just finished the back 40 plowing for butterflies n bee's flowers .the typing moderator wont allow idgiet :P

Posted on Apr 18, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 6,702 Answers

As soon as you discover a strange thing on your car or engine, it is not wise to drive it, as long as it is not clear what is causing it.
sometimes the symptoms can come way before the real disaster strikes. Excessive usage of coolant, or an engine running hot can be caused by a head gasket, first just leaking a bit, but after a while the leaking is so huge the engine won't run. When you reached that stage, the repair will be very costly. It will be more expensive as when you had brought it to a tech when you noticed the first signs. Just an example. I would suggest consult a tech or visit a repair shop.

Posted on Apr 18, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2006 Caravan temperature gauge goes to red - engine is not overheating. Kick it into a lower gear (automatic trans) and the gauge comes back down. Is it likely the coolant sensor?


Could be.. is the system FULL? Air in it can cause some odd things. When engine and coolant are COLD (as in after sitting over night), open the radiator cap. Top off the overflow res with a 50/50 antifreeze / water mixture to HOT mark. Start engine, turn heat to hot and fan to high. Top off RADIATOR with same 50/50 mixture slowly & gradually. As the coolant circulates, it should bring any AIR trapped in the system (from heater core & engine block) to the radiator where you can replace it with the 50/50 mix. Once the coolant is HOT and stays level - about an inch under the opening, close the radiator. Monitor the overflow res and add as needed. Good luck!

Sep 23, 2015 | 2006 Dodge Grand Caravan

2 Answers

2005 jeep liberty blows cold air through the heater.


Either you are low on coolant and there is air in your heater core, or the thermostat isn't working properly, or your water pump is going out.

Dec 13, 2014 | 2005 Jeep Liberty

3 Answers

Engine overheating i have replaced the radiator has plenty of water


replace thermostat.then bleed coolant system, this is how you do it.fill the cooling coolant system with 50 / 50 dexcool and water to raise boiling point,straight water will evaporate boil away cause engine to overheat catch fire thats why you need 50 / 50 mixture antifreeze and water.to bleed coolant system first fill coolant system until coolant stay at the full cold mark on the the coolant overflow jug,then you start engine allow it to idle,place the heater and ac control in any ac setting except max and the temperature control to the highest setting,run engine until lower hose to water pump is hot. with the engine hot run the engine speed up to 3000 rpm and allow it return to idle, repeat this 5 times. slowly open the bleed valve on the thermostat housing or look for bleed valve at the water pump heater hose.open bleed valve for 15 seconds to expel any trapped air.then top off the coolant as necessary,and when top radiator hose hot thermostat open up.keep adding cooling to overflow until coolant level stop at full cold mark dont over fill coolant.if engine seem like overheating while looking at cooling gauge turn off engine wait a while until cool off add more coolant until coolant level stay stable and dont drop any.when open radiator overflow cap use large rag over the radiator cap to keep from getting scald open radiator cap a little at a time but dont open radiator cap until engine cool down first.replace the radiator overflow cap, thermostat,and engine coolant temperature sensor and check the cooling fans fuses and relays see what happens.

Aug 18, 2012 | 1998 Oldsmobile Intrigue

1 Answer

The car is overheating but ck eng light not coming on. The transmission catches hard intermittently. The rpms seem to be running higher than normal.


check for low coolant level.check coolant overflow jug if it is empty, more likely air is in the coolant system.add more coolant to overflow jug until coolant level stay at cold full mark,dont over fill coolant overflow jug.if all is good, to be on the safe side, replace radiator cap,replace thermostat,if your engine overheat at a long slow driving traffic.or long stop idling, if cooling fan dont turn on more likely engine coolant temperature sensor could be faulty.

Jul 28, 2012 | 1999 Pontiac Sunfire

1 Answer

How do i put water in my radiator?


you need to replace thermostat and radiator cap.look under hood around engine compartment.look for a radiator cap near radiator,add 50/50 antifreeze and water to coolant system to bring up boiling point.pure water will cause engine run hotter because water evaporate away,remove radiator pour coolant in the radiator until coolant stop dropping in the radiator now some vechicle pour coolant in the coolant overflow jug,pour coolant until coolant level stop dropping and the coolant level stay at cold full mark.start engie let idle few minutes, watch coolant level in radiator if coolant start dropping add more coolant, when coolant level stop dropping put radiator cap back on let engine idle until both top radaitor hose and bottom coolant hose get warm turn off engine wait until it get cool then take a large rag slightly open radiator just a litle at a time to keep from getting scaled.once radiator remove add more coolant if low,put radiator cap back on start the engine let it idle watch the temp gauge if temperature gauge going hot zone stop engine wait until cool then add more coolant,keep doing this until engine stop overheating going into hot zone and coolant level stop dropping,make the coolant overflow jug coolant level stay at full cold mark, dont let jug run empty if so air will get in the coolant system causing engine to overheat.

Jul 22, 2012 | 2000 Plymouth Breeze

2 Answers

2004 jetta overheats real quick no collant leaking eng fan seems to come on too late


SOUND LIKE ENGINE COOLANT LEVEL LOW.CHECK COOLANT SURGE TANK.IF LOW MORE LIKELY RADIATOR COOLANT LEVEL LOW.ADD COOLANT TO COOLANT SURGE TANK UNTIL COOLANT LEVEL STAY AT FULL COLD MARK DONT OVERFILL OVERFLOW JUG.

Aug 24, 2011 | Volkswagen Jetta Cars & Trucks

2 Answers

My sunfire overheats and leaks out overflow everytime i drivee it.i changed water pump,thermostat the fan is working fine and had a water pressure test done last mth


DID YOU BLEED AIR OUT THE COOLANT SYSTEM.TO BLEED COOLANT SYSTEM, FILL THE COOLANT SYSTEM THROUGH THE RESERVOIR TANK OR THE RADIATOR UNTIL THE FULL COLD MARK IS REACHED.BESURE TO USE 50/50 HALF WATER AND ANTIFREEZE.YOU CAN BUY ANTIFREEZE THAT IS ALREADY PREMIX 50/50.AFTER ADDING ANTIFREEZE TO RESERVOIR OR RADIATOR FILL RADIATOR TO FULL MARK OR IF YOU DONT HAVE RADIATOR CAP ON RADIATOR POUR ANTIFREEZE IN THE OVERFLOW JUG UNTIL COOLANT LEVEL STAY THE FULL COLD MARK.WAIT AWHILE UNTIL COOLANT LEVEL STOP DROPPING.NOW INSTALL THE RADIATOR OR OVER FLOW JUG CAP.START THE ENGINE AND ALLOW IT TO RUN UNTIL NORMAL OPERATING TEMPERATURE IS REACHED AND THE UPPER RADIATOR HOSE BECOME HOT.STOP THE ENGINE AND OBSERVE THE COOLANT LEVEL IN THE OVERFLOW JUG. THE COOLANT LEVEL SHOULD BE AT THE FULL HOT LINE.ALLOW THE ENGINE TO COOL UNTIL THE AMBIENT TEMPERATURE IS REACHED THEN CHECK THE COOLANT LEVEL IT SHOULD BE AT OR ABOVE THE FULL COLD LINE.ADD MORE COOLANT IF NECESSARY. WARNING BECAREFUL WHEN OPEN THE RADIATOR CAP OR JUG OVER FLOW CAP.USE A LARGE RAG OVER THE RADIATOR CAP TO KEEP FROM GETTING SCALDED.OPEN RADIATOR CAP A LITTLE AT A TIME TO KEEP FROM GETTING SCALDED.WAIT UNTIL ENGINE COOL DOWN BEFORE OPENING RADIATOR CAP OR OVERFLOW JUG CAP.WEAR SAFETY GLASSES.

Jul 12, 2011 | Pontiac Sunfire Cars & Trucks

2 Answers

Over heating on my dodge intrepid 1997 after short time of driving


CHECK ENGINE COOLANT LEVEL.MAKE SURE COOLANT OVER FLOW JUG HAS COOLANT IN FULL COLD MARK.IF COOLANT OVER FLOW JUG IS EMPTY RADIATOR GOT TO BE LOW ON COOLANT POUR COOLANT IN THE OVER FLOW UNTIL COOLANT LEVEL STAY AT THE COLD FULL MARK.SEE IF RADIATOR DONT HAVE A RADIATOR CAP YOU HAVE TO POUR COOLANT IN THE OVER FLOW JUG COOLANT WILL FLOW DOWN IN RADIATOR UNTIL COOLANT LEVEL STOP AT FULL COLD MARK.IF COOLANT LEVEL OKAY.YOUR THERMOSTAT NEED CHANGING ALSO RADIATOR PRESSURE CAP.HAVE RADIATOR FLUSHED OUT.HAVE ENGINE BLOCK FLUSHED OUT.CHECK ENGINE OIL IF OIL LOOK LIKE MILK SHAKE ON OIL DIP STICK YOU HAVE LEAKING HEAD GASKET THAT WILL CAUSE ENGINE OVER HEAT WHILE CAR IN MOTION.CHECK WATER PUMP MAKE SURE ITS WEEP HOLE NOT LEAKING ANTIFREEZE IF SO WATER PUMP NEED REPLACING.

Jun 20, 2011 | 1997 Dodge Intrepid

1 Answer

Yes it is normal just no hot air


1. When setting the temperature to MAX, blower level to FULL and outside air Vent CLOSED, no hot air comes out after 2-5 minutes?
If YES, when did you last flushed your radiator and is it full?
2. if more than 5 years ago, flush radiator system, instructions are usually in Owners manual. Use a bottle of Radiator cleaner, run egine hot for about 10-15 minutes, carefully open petcock in bottom of radiator to flush out radiator, WARNING, careful as flushed coolant would be boiling hot. As sson petcock is open and water start to flow out, carefully open radiator cap to enhance flushing flow. Use garden hose to fill radiator while flushing until water coming out from petcock is cold and clear.
Once clear, start engine, turn heter full and blower full blast and keep hose in radiator flowing full, leave petcock open until clear water flows out again. Once clear waters comes out, turn off engine,turn off garden hose and let water drain empty radiator. Once it stops flowing out, close petcock snug and put radiator cap on, pull off radiator coolant catch bottle, clean bottle for any debris and dirt. Drain any water, leave bottle empty and put it back onto its place.
3. Fill radiator with 1 gallon (4L) of concentrated coolant, top up radiator until full, fill catch bottle with concentrated coolant, start engine and keep it overflowing until no bubbles comes out and the radiator is fully hot. Once it is flowing good, close and connect everything. Drive with it and keep catch bottle filled as necessarry.
Good luck. Give as vote and good comment if this advise solve youor problem. Thank you.

Jan 05, 2011 | 2000 Chevrolet Suburban

1 Answer

Coolant lights come on and start flashing, check coolant and its foaming?


Possible that the engine is heating up more than required. Check the radiator cap or replace with the correct pressure type.
Check if the radiator is blocked , the water pump is defective or if the engine ports are blockes.
Do a full flushing of the radiator and refill with new coolant.
If the fault stays, check the engine timing , do a good tuning of the engine, check for friction of the traction so as the engine is not powered.
Comment on the info.

Aug 26, 2010 | 1998 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...