Question about Hyundai Motor 2003 Sonata
Front ash tray will not close. What latches it shut?
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you should be able to get replacement parts at Napa or Oreillys they a fairly in expensive. but only if the are the drive in kind, meaning you need to take a hammer to knock them out of the rotor assembly then you just take a drift pin/punch and hammer them back in. hope this is helpful. please rate this solution. thanks
Posted on Aug 30, 2008
hi if you look at the new stids you are going to fit? you will see they are splined on the inner side so with wheel off you tap the old stud/s backwards from the hub then fit new stud/s from the rear ensuring located on splines then you can draw fully home into hub using w/nut or another nut same thread ? if your cars nuts are not open ended ?
Posted on Oct 03, 2009
Tips for a great answer:
Sep 30, 2016 | 2011 Hyundai Sonata SE
Sep 19, 2014 | 1998 Ford Taurus
Mar 04, 2013 | 2000 Hyundai Sonata
Jun 01, 2012 | Chrysler Cars & Trucks
Feb 25, 2010 | 2004 Chevrolet Aveo
Oct 31, 2009 | 1993 Oldsmobile Cutlass Ciera
Aug 01, 2009 | 2004 Jaguar X-Type
Jun 21, 2009 | Hyundai Motor 1998 Sonata
Mar 25, 2009 | 2003 Ford Expedition
Oct 03, 2008 | 1997 Hyundai Sonata
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: