Question about 1995 Chevrolet Chevrolet S 10

1 Answer

How do I put my heads back on for a 95 Chevrolet s10 4 cylinder what toque do thay need to be at

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

4cyl only has one head but need motor size in liters then go to []

Posted on Apr 18, 2015


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 1992 BMW Cylinder head

30nm 90 degrees, 90 degrees Renew bolts!!

Posted on Jun 20, 2008



Posted on Jan 17, 2009

  • 135 Answers

SOURCE: the torque pressure on 2000 chevrolet bolts on the cylender heads

most are 65 foot pounds ,that is what i say it is . gm on v8 engines are same ,head bolts are 65 and hope this it some help,thanks robert b.

Posted on Jun 27, 2009

  • 76630 Answers

SOURCE: pls let me know the toque unit to tightened up the cylinder head of engine nissan QR20DE

Here it is.

Posted on Oct 19, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is toque spec's for 95 mitsubishi 3000GT head bolts

Torque the heads in 2 passes in the correct sequence

First pass is 76 Ft Pounds

Second pass is 83 Ft Pounds.

Sep 26, 2016 | 1995 Mitsubishi 3000GT

1 Answer

I need the toque settings for toyota runx 1.6 cylinder head 2006 mode

to torque what wheel ? hub bearing? head gasket ?

Oct 25, 2014 | Cars & Trucks

1 Answer

I need to know what to set my torque wrench on to put the cylinder head back on.

according to the service manual, it is 44 ft. lbs. on step one, and then you rotate an additional 95-degrees on step two--following the required torque sequence--starting from the center, crisscrossing, ending at the rear of engine. Because of the bolts stretching, always use new head bolts and lube them when installing them.

Mar 13, 2014 | 2002 Chevrolet Malibu

1 Answer

Cylinder head bolt torque

Hi after settings for toque head bolts down after new head gasket in pounds thanks

Jan 04, 2014 | 1991 Toyota Pickup

1 Answer

Please explain on a 96 cavalier 2.2 it say to torque heads 90 degress?

You are referring to the cylinder head bolt-torque sequence. Here is the instructions, then I'll clarify.

  1. Install cylinder head bolts finger-tight. New cylinder head bolts are recommended.
  2. Tighten bolts in sequence, tighten the long bolts to 46 ft. lbs. (63 Nm) plus 90 degrees. Tighten the short bolts to 43 ft. lbs. (58 Nm) plus 90 degrees.

The cylinder head is made of aluminum. Over-torque of bolts can result in warping or cracking of the head. Also, some of the head bolts go into the water jacket. Those bolts requires a teflon sealer or water will come up through the threads and result in coolant leaks. Use a thin wood dowel to probe the cylinder head bolt holes to see if they bottom out or go into the water jacket.

When you tighten the bolts, do it in the sequence directed, up to the toque specified for each length bolt. Once that has been done, you will make one more circuit of the bolts, tightening each one by 90 degrees. The easy way to do this is to place your torque wrench on a bolt with the handle pointed at 6 o'clock. Tighten the bolt another 90 degrees, or when the handle reaches 9 o'clock. 90 degrees is 1/4 revolution of the bolt. (You can start the wrench anywhere that is convenient to make the 90 degree advance without interruption.)

Hope that helps!

Nov 14, 2013 | 1996 Chevrolet Cavalier

1 Answer

Cylinder head bolt torque chevrolet 3.4

here is the troque spec for the cylinder heads.

Cylinder Head Bolt
  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees
Cylinder Head Bolt
  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees

Cylinder Head Bolt
  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees
first pass 44 ftlbs
second pass 95 degrees

Jan 30, 2010 | 2003 Chevrolet Impala

1 Answer

I nee the head bolt torque specs for a 95 sable

    • Tighten retaining bolts in sequence to 80 Nm (59 ft. lbs.).
    • Then back off bolts 360°.
CAUTION: Always use new cylinder head bolts when installing cylinder head or damage to engine may occur.
  1. Tighten the cylinder head retaining bolts in two final tightening steps in sequence shown in the following illustration:
    • 50 Nm (37 ft. lbs.)
    • 92 Nm (68 ft. lbs.)

Nov 03, 2009 | 1998 Ford Taurus

1 Answer

Cyl head torque on 05 3.4l chev equinox

① Step 1: 44 ft. lbs. Step 2: plus 95 degrees

Driver's side head--


Install the NEW cylinder head bolts. Tighten the bolts as follows:
  • Tighten the bolts in sequence to 44 ft. lbs. (60 Nm).
  • Turn the bolts in sequence an additional 95 degrees.

Oct 31, 2009 | 1999 Chevrolet Lumina

Not finding what you are looking for?
1995 Chevrolet Chevrolet S 10 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides