Question about 2001 Mitsubishi Galant

3 Answers

Car cut off & now wont start

My car cut off on me while I was driving, and now it won't start.

Posted by on

  • nelson morales Apr 20, 2015

    Sounds like the fuel pump went bad.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 128 Answers

If it turns over and does not start,it could be timing belt has broken

Posted on Apr 18, 2015

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 39 Answers

Alternator or battery terminals are where I would suggest you start then proceed to the starter in case it turns over but don't start. It is only two things I can quickly think of that will do things like that naturally, that is the alternator and fuel pump. The fuel pump will give you a turn over and not start, while the alternator will just drain the battery and die leaving you with little energy to start with.

Posted on Apr 18, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 2,825 Answers

Does it turn over and not start, or doesn't it even do that?

Posted on Apr 18, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

1 Answer

F 450 won t start


does it have fuel pressure??is the auto shutoff (fuel cut off ) working..

Jan 05, 2014 | Ford Cars & Trucks

1 Answer

1990 crown victoria had valve cover gaskets remove & replaced, and know my won't reverse good, & keeps cutting off


this is a combination of issues from whomever did the work..first, in order to remove the valve covers, all the hardware on top had to be removed, to include some vacuum equipment and hoses, and the shifter link arm on the drivers side of the firewall. if these hoses arent reconnected properly, the running of the car is effected, and if the shift link arm wasnt adjusted when reinstalled, it wont shift right at all.. if the folks who worked on it wont repair it for free(and you are allowed to watch them do it) then take your bill and the defunct car to another dealer garage who will make it right and charge the bill to the former garage..nothing gets my goat worse than someone who doesnt have a clue what they are doing to my car, thats why all my work is done by me, unless I cant do it myself..(which hasnt happened yet) if you know what you are doing, fixing the vacuum system hoses and such(using a diagram from the auto parts store,) will assist the running of the engine, the shifter adjust is eithewr up top on the steering column under the hood, or under the bottom at the transmission itself...put the car in park firmly and see where the shift arm(once loosened ) sets..adjust it to fit as its supposed to be and it should shift right with all gears present..good luck..

Jan 13, 2013 | 1990 Ford LTD Crown Victoria

1 Answer

My 94 fors Taurus cuts out while driving and sometimes will not start. It cranks but won't start. We changed the fuel pump, spark plugs and distributor cap, but it is still cutting out while driving...


are there any codes? have you checked the pressure in the fuel line. you may have a bad fuel pressure regulator. or a bad crank position sensor. spray starter in the throttle body and see if it starts

Dec 14, 2012 | Cars & Trucks

1 Answer

Zafira 1.6 petrol 4 injectors open when hot


I woud suspect if it is all 4 it is an open circuit in the wireing. When faulting & won't go follow the injector wireing back from the injectors & slightly bend the wireing harness while someone is cranking the vehicle. Pay particular attention to where the harness runs near the exhaust (if it does) & check for any melted parts of the loom or conecting plugs. Also disconnect the loom at the 1st place along the loom & look at the connector for anything unusual.

Jul 01, 2012 | 2006 Opel Zafira 1.6

1 Answer

My ac quit working (won't even blow), windows won't go up or down and radio wont work only will eject


Hi Kolya, Check around for a loose or broken cable especially around the battery connections. Regards John

Apr 23, 2012 | 1995 Chevrolet Suburban

1 Answer

1997 chrysler town & country was cutting out,died,now wont start


you need to put a scanner on it and see what code comes up.
my guess would be the crank sensor which is very common .

Feb 12, 2010 | 1997 Chrysler Town & Country

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...