Question about Cars & Trucks

1 Answer

Please instructions to remove starter and change battery cables

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 775 Answers

Hi first undo battery,jack car up,(putting on axle stands)undo cables from starter motor ,then undo the two or three bolts pull out starter,with the cables just follow the battery cables to where thay go undo and replace.
all the best.

Posted on Apr 18, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace starter


Starter Replacement
Removal Procedure
Caution: Before servicing any electrical component, the ignition and start switch must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    alt="Object Number: 217186 Size: SH">
  3. alt="Click here for detailed picture of above image.">
  4. Remove the positive battery cable starter motor lead nut (1) from the starter.
  5. Remove the positive battery cable lead from the starter.
  6. Remove the starter solenoid terminal lead nut (2) from the starter.
  7. Remove the starter solenoid terminal lead from the starter.
    alt="Object Number: 217190 Size: SH">
  8. alt="Click here for detailed picture of above image.">
  9. Remove the starter motor bolts (2, 3).
  10. Remove the starter motor (1).

Sep 23, 2015 | 2000 Cadillac Catera

1 Answer

How to replace the starter on my 93 tercel


Please see my tip at http://www.fixya.com/cars/r5973094-starter_replace . These are generic instructions. specific instructions for your car are pasted below from autozone.com. If you get stuck, please get back to me.


REMOVAL & INSTALLATION CAUTION On models equipped with a Supplemental Restraint System (SRS) or "air bag,'' work must NOT be started until at least 90 seconds have passed from the time that both the ignition switch is turned to the LOCK position and the negative cable is disconnected from the battery.

  1. Disconnect the negative battery cable.
  2. Disconnect all the wiring from the starter terminals. On some models, it may be necessary to remove the transaxle cable and bracket from the transaxle.
  3. Remove the heat insulator, if equipped, and the starter mounting bolts.
  4. Remove the starter.
  5. Installation is the reverse of the removal procedure.

Fig. Fig. 3: Removing the starter from the vehicle jturcotte_481.gif

Dec 12, 2010 | 1993 Toyota Tercel

1 Answer

How to change a 1991 cadillac seville starter


I will paste instructions from autozone.com below, but recommend you also read thru my post at http://www.fixya.com/cars/r5973094-starter_replace and let me know if you have questions.

4.5L and 4.9L Engines

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle securely on jackstands.
  3. Remove the starter motor shield.
  4. Remove the exhaust front and rear pipe assembly.
  5. Remove the flexplate inspection cover.
  6. Disconnect the solenoid 'S' terminal nut and battery cable nut.
  7. Unbolt the starter motor mounting bolts, and remove the starter motor.
0fa6f1f.gif

Fig. Later model starter location and mounting on the 4.9L engine


To install:

  1. Install the starter motor, and tighten to 32 ft. lbs. (43 Nm).
  2. Install the solenoid 'S' terminal nut. Tighten the nut to 35 inch lbs. (4 Nm).
  3. Install the battery cable nut and tighten to 12 ft. lbs. (15 Nm).
  4. Install the flexplate inspection cover, the front and rear exhaust pipe assembly and the starter motor shield.
  5. Lower the vehicle.
  6. Connect the negative battery cable.

Nov 01, 2010 | 1991 Cadillac Seville

2 Answers

Where is the starter


Radiator side of engine block lower

Oct 26, 2010 | 1998 Pontiac Grand Prix

1 Answer

Replace starter on ford Aerostar 3.0


Please see my tip at http://www.fixya.com/cars/r5973094-starter_replace . These are generic instructions. Specific instructions for your car from autozone.com are pasted below.


REMOVAL & INSTALLATION
See Figures 4, 5 and 6

  1. Disconnect the negative battery cable.
  2. Raise the vehicle and support it safely on jackstands.
  3. Disconnect all cables and wires at the starter solenoid on the starter motor.
  4. Remove the starter mounting bolts and lower the starter from the engine.

eeea2a6.gif


Fig. Fig. 4: Detach the wiring connectors from the starter motor, ...


fa8b115.gif


Fig. Fig. 5: ... then, while supporting the starter motor, remove the starter mounting bolts


d8861ce.gif


Fig. Fig. 6: Lower the starter motor out from under the engine-1991 3.0L engine shown, other engines similar


To install:

  1. Position the new starter assembly to the engine block and start the mounting bolts in by hand.
  2. Snug all bolts while holding the starter squarely against its mounting surface and fully inserted into the pilot hole. Tighten the mounting bolts to 15-20 ft. lbs. (21-27 Nm).
  3. Reconnect the starter cables and wires to the starter motor. Tighten the screw and washer assemblies to 70-130 inch lbs. (8-15 Nm).
  4. Lower the vehicle, then connect the negative battery cable.
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles (16 km) or more for the PCM to relearn the strategy.

Oct 20, 2010 | 1995 Ford Aerostar

1 Answer

How do you remove a starter on a 1998 mercury mystique 2.0 litre


Please first see my tip at http://www.fixya.com/cars/r5973094-starter_replace, then see specific instructions below for your Mercury. Let me know if you have questions.
Your starter is in the back of the engine.
from autozone.com
  1. Disconnect the negative battery cable.
  2. Remove air intake resonators. [loosen clamp and remove bolts, lift out resonator]
  3. Remove starter motor upper mounting bolts.
  4. Raise and support the vehicle.
  5. Remove the nuts on the starter terminals and remove the cables from the terminals.
  6. Remove the two starter lower retaining bolts and remove the starter.

e18db91.gif
resonator


eaf7550.gif
upper starter bolts



77b70cc.gif

Sep 26, 2010 | 1998 Mercury Mystique

1 Answer

Where is my starter and how do I change my starter?


2000 Hyundai Elantra 2.0L MFI DOHC 4cylRemoval & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Speedometer and shift control cables Starter electrical connectors Starter motor
  3. 2e15922.jpg

    Fig. Exploded view of the starter-XG 300 and XG 350

To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 25 ft. lbs. (34 Nm) Starter electrical connectors Speedometer and shift control cables Negative battery cable
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    Negative battery cable Air intake assembly Speedometer cable Shift cable Starter wiring connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 20-25 ft. lbs. (26-33 Nm) Starter wiring connectors and torque the battery cable nut to 88-140 inch lbs. (10-16 Nm) Shift cable Speedometer cable Air intake assembly Negative battery cable
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Air intake assembly Speedometer cable Shift cable Starter wiring connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 20-25 ft. lbs. (26-33 Nm) Starter wiring connectors and torque the battery cable nut to 88-140 inch lbs. (10-16 Nm) Shift cable Speedometer cable Air intake assembly Negative battery cable
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable Speedometer and shift control cables Starter electrical connectors Starter motor
To install:
  1. Install or connect the following:
    Starter motor and torque the bolts to 25 ft. lbs. (34 Nm) Starter electrical connectors Speedometer and shift control cables Negative battery cable.

All Others
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    Negative battery cable and wait at least 3 minutes Speedometer cable and shift cable from the transaxle Starter motor wiring Starter motor bolts and the starter
To install:
  1. Installation is the reverse of removal. Tighten motor retainers to 20-25 ft. lbs. (27-34 Nm).

Hope helps (remember rated this).

Jul 14, 2010 | 2000 Hyundai Elantra

2 Answers

Step by step instructions to change starter/94 Lexus LS400


Disconnect the battery.
Disconnect the wires from the starter.
Unbolt & remove the starter.
Bolt the new starter into place.
Connect the wires to the starter.
Connect the battery cables.

Dec 30, 2009 | 1994 Lexus LS 400

1 Answer

How hard to replace starter on 3.4 liter 1997 chevy lumina sedan?


Here are the instructions on how to replace your starter.

WARNING Remember that the positive battery cable to the starter motor is electrically "hot" all the time. You must open the circuit by disconnecting the negative battery cable before servicing the starter motor.
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle.
  3. Remove the front lower air deflector panel by locating the deflector retainers. These are push-in retainers and should be carefully pried loose. Remove the ambient temperature sensor, if equipped.
  4. Remove the two torque converter covers. They are retained by small screws.
  5. Remove the starter solenoid "BAT" terminal nut (the large one) and disconnect the battery positive cable from the starter motor. Remove the S terminal nut and disconnect the solenoid wire.
  6. Remove the starter motor mounting bolts. Use care. The starter is relatively heavy. Do not allow it to fall. Take note of any thin metal shims between the starter and engine block. They may be required at installation.
To install:
  1. Verify the correct starter motor has been obtained. Position the starter motor, including any shims found at removal, to the engine block and install the mounting bolts finger-tight until seated. Torque the bolts to 32 ft. lbs. (43 Nm).
  2. Position the wires to the starter. Install the nuts finger-tight, then tighten the starter solenoid "BAT" (heavy cable) nut to 84 inch lbs. Tighten the starter solenoid S terminal nut to just 20 inch lbs. (2.5 Nm).
  3. Install the torque converter covers and tighten the torque converter cover screws to 89 inch lbs. (10 Nm).
  4. Install the front lower air deflector panel by pressing in the plastic retainers.
  5. Lower the vehicle.
  6. Connect the battery negative cable. Start the engine to verify correct operation.
please do not hesitate to ask me further questions about your vehicle.
please do not forget to rate and comment about your experience today with fixya.


Dec 27, 2009 | 1997 Chevrolet Lumina

1 Answer

How to change starter on 2000 chevy silverado


These instructions are for a 5.3L. Unless it is a V6 or diesel, the instructions will be similar if you have a different gas V8.
  1. Disconnect the negative battery cable
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the protective shields as necessary.
  4. Remove the starter solenoid shield.
  5. Remove the starter to transmission close out cover bolt.
  6. Disconnect the engine oil level sensor connection.
  7. Remove the front axle mounting bracket through bolt nut, if equipped with four wheel drive (4WD).
  8. Reposition the front axle mounting bracket through bolt until the bolt tip is flush with the support bushing. Do not remove the bolt, if equipped with 4WD.
  9. Remove the mounting bolts from the engine block.
  10. Slide the starter forward until the starter clears the transmission.
  11. Remove the starter transmission close out cover
    1. Disconnect the positive battery cable and wiring harness from the starter.
    2. Remove the starter from the vehicle.
      1. Connect the positive battery cable to the starter. Tighten Tighten the nut to 16 N.m (12 lb in) .
      2. Install the starter transmission close out cover.
        1. Install the mounting bolts to the engine block. Tighten Tighten the bolts to 50 N.m (37 lb ft) .
        2. Reposition the front axle mounting bracket through bolt until the bolt is fully seated. if equipped with 4WD.
        3. Install the front axle mounting bracket through bolt nut, if equipped with 4WD. Tighten Tighten the nut to 90 N.m (67 lb ft) .
        4. Disconnect the engine oil level sensor connection.
        5. Install the starter to transmission close out cover bolt.
        6. Install the starter solenoid shield.
        7. Install the protective shields as necessary.
        8. Remove the safety stands.
        9. Lower the vehicle.
        10. Connect the negative battery cable. Tighten Tighten the bolts to 17 N.m (13 lb ft) .

Oct 01, 2009 | 2002 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...