Question about 1991 Toyota Corolla

Open Question

Intake cam setting - 1991 Toyota Corolla

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 huyndia tucson 2.0 i need the timing marks on exhaust cam and inake cam on the chain


Exhaust camshaft gear and Intake gears have dots on them, chain has colored links. Align colored links to dots or count 14 links from ex cam dot to intake dot. Make sure that the mark on the cambelt side is set first on ex side. Small hole on ex cam gear (cambelt) side to line up with mark on head.

Apr 07, 2014 | 2009 Hyundai Tucson 2.0

1 Answer

Set "******** position"? for intake cam adjuster in 2002 c230


It is likely the camshaft phaser is defective. Since this is a very involved repair have a shop confirm the problem with the Phaser

Jul 15, 2012 | Cars & Trucks

1 Answer

How exactly should the intake cam be set and the exhaust cam be set on a ford 2.0 dohc with VCT.


There is a Camshaft Alignment Timing Tool that is made to hold the cams and another one to find TDC on the crank.

Feb 18, 2011 | 2001 Ford Escort ZX2

1 Answer

Need to know how to set the timing for an 05 kia rio and there are no repair manuals for this car please help


YOU HAVE 2 CAM GEARS . A INTAKE CAM AND AN EXHAUST CAM . ON THE INTAKE CAM THERE IS AN I FOR INTAKE WITH A MARK STRAIGHT ABOVE IT AND ON THE EXHAUST CAM THERE IS A E AND RIGHT ABOVE THAT IS A MARK. LINE THE I MARK UP WITH THE MARK ON THE BACK OF THE INNER COVER [WHICH IS A LITTLE MARK KINDA LOOKS LIKE AN ARROW] THIS IS ON BOTH SIDES . ON THE CRANK THERE IS A KNOTCH ON THE BACK OF THE TIMING GEAR FOR THE CRANK AND A MARK ON THE THE COVER LINE THE 2 UP AND YOUR THERE. IF YOU HAVE ANY MORE QUESTIONS YOU CAN E MAIL ME GOOD LUCK

Jan 31, 2011 | 2005 Kia Rio

1 Answer

1995 ford escort 1.9 intake manafold removal


How do you know the cam sensor is bad? You tested it how? Don't go by a code being set,you'll be wrong 50% of the time.

May 28, 2010 | 1995 Ford Escort

1 Answer

How do you set the cam timing on a dodge 2.7 liter, between the exhaust cam and intake cam???? HELP!!


Here are the diagrams for the secondary timing chains (exhaust cam - intake cam) and the primary timing chain. (courtesy of AutoZone)

10bc7b2.gif

60dbeef.gif

Feb 22, 2010 | 2002 Dodge Intrepid

1 Answer

I need timing marks on 1997 cad.sev 4.6 eng


well you need to start from the crank and set that you will see a dot on the bottom gear set it straight up next the cams you have 4 cams all need to be set ok the cams will need to be set as follows the 2 inner cams next to intake manifold should be set at li,ri.........the 2 outer cams set at le,re 90 degrees straight offf the head

Mar 22, 2009 | 1997 Cadillac Seville

2 Answers

Need to know how to set the timing


Cylinder #1 set at TDC, compression stroke. Cam marks level with head, aligned with mark on cover, or if unclear where to mark the cam: SET Cam at point where intake valve has just closed and both valves are shut on cyl. #1, cam gear marks should start to appear more clearly to technician, along with corresponding alignment points. This is ballpark. Remember, on clockwise rotation, after cylinder #1 intake valve(s) are shut, the cam will continue to rotate 90 degrees and come to rest at a position in which both exhaust and intake valves are at their maximum lash point. (the most play) Hopefully if you get this close, you will decipher the marks that exist on your Bavarian machine.

Jan 19, 2009 | 1999 BMW 318 ti

1 Answer

Timing gear set


That is a dual overhead cam engine. On the oil pump housing there is an arrow cast into the housing. Line the arrow on the crank pulley up with the arrow on the oil pump housing, that will set your crankshaft in time. Next you'll need to set your camshafts. This is the procedure for doing that......the exhaust cam gear (nearest the firewall) has markings on it that say "2.4L" on one side and "up^" on the other side. On the left side of the gear is a notch on the tooth. This notch MUST be set at 3:30 and the intake cam at EXACTLY 9:00. Once you've installed the timing belt and you rotate the tensioner to "tighten", the offsetting of the exhaust cam will match up with the intake cam. And presto!!! your timing is now set. Make sure you turn the crank sprocket TWO complete revolutions and verify your timing marks.

Chris

Nov 08, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
1991 Toyota Corolla Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...