Question about 1999 Toyota Camry

1 Answer

Already replaced ignition coil and wire plug. But don't have spark on cylinder# 3 on my 1999 toyota camry. What can I do?

Posted by on

  • Mario Koole Apr 18, 2015

    Go to Walmart buy one spark plug for #3 Bosch plantnium split fire they're around 10 bucks put that one in there you're ready to go bud 99 Toyota another hundred miles

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

Hi,first see if the plug is falty,then change the H,T,Leads and distributer cap,
if this dose not work then you should do a compression test as it could be one of the valves,
I hope the first diagnoses is the one.
hope this helped some,all the best,let me know how you got on.

Posted on Apr 18, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 373 Answers

SOURCE: 2001 hyundai santa fe 6

HI......
OK. just follow the number on the ignition coils.
And the number on the cylinders are.
The FIREWALL side are 1,3,5, Starting from the belts location.
The RADIATOR side are 2,4,6, Starting from the belts location.
The coil with number 1 go to cylinder 1. as the same way the rest of the coils and cylinders.

OK... I hope this solve your question .

THank you for use fixya.

Posted on Jul 25, 2008

  • 1 Answer

SOURCE: 94 toyota camery no spark

I had the same problem recently but replacing the ignition Coil under the distributor (inside) solved the problem. Also replaced the distributor Cap and rotor at the same time.

Posted on Oct 31, 2008

  • 11 Answers

SOURCE: 1990 Toyota Camry just stopped running has no spark but has fuel.

check the main fuses under the hood to see if any are blown

Posted on Jul 23, 2009

Molson02536
  • 3854 Answers

SOURCE: I need a spark plug wire diagram for a 1992 Toyota

1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)

Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5

Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder

Good luck and hope this helps.

Posted on Jan 12, 2010

  • 432 Answers

SOURCE: car wont start, not getting spark

crankshaft sensor, or computer on toyotas then it was usually the distributor or the computer, but the crankshaft sensor might be bad too thats what helps to get you spark.

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toyota camry with codes obd codes p0300 - p0306 and p0354?


The car needs carlibration,the code means random cylinder misfire.fuel line need and MAF need check

Sep 05, 2014 | 2007 Toyota Camry

1 Answer

1994 toyota camry 3.0 engine misfiring 1,3,5 cyls.


cylinders 135 are on rear off engine by fire wall, does your car have all coils or only front three, if this is the case, if no oil found into spark plug tube try replacing wires first, if oil in them replace valve cover gaskets and gromets, dont forget a fresh set of wires.

Jul 21, 2013 | 1994 Toyota Camry

1 Answer

I cannot find the spark plugs on my camry !!!


First, you didn't mention which engine your 1994 Toyota Camry is equipped with. (This is really MUST-KNOW information if you want help with fixing your car.) There is a 3.0L V-6 engine and a 2.2L 4-Cylinder engine. Two TOTALLY different animals! I'll just take the extra time to answer for BOTH of them....

If your Camry is equipped with a 3.0L V-6 engine, You cannot find the spark plug wires because there are none, That engine is equipped with Coil On Plug (COP) ignition. The coils on the left bank (the side of the engine near the radiator) are located under the plastic cover on top of the engine. The coils for the right bank (the side of the engine near the firewall) are located under the upper intake plenum. The plenum MUST be removed to access them. (this is also required to replace the spark plugs.)

If you have the 2.2L 4-cylinder engine, the wires run down the center of the valve cover and the boots go down through the valve cover to the plugs. The other end of the wires attach to the distributor cap at the rear (drivers side) of the engine.

Jul 25, 2011 | 1994 Toyota Camry

1 Answer

Where are located the spark plugs in a 4 cyl camry 2007 and how i can replace?


They are in the engine valve cover, each plug has its own ignition coil on the top of it, no plug wires, you must unbolt the 4 coils and remove them from the top of the spark plugs and see them aside, then use a 5/8" deep spark plug socket to remove them. Below is a picture of one of the 4 ignition coils.


emissionwiz_132.jpg

Mar 24, 2011 | 2007 Toyota Camry

2 Answers

How do u change the spark plugs on a 1994 toyota camry


Start with a cool/cold engine.

Four cylinder: Remove spark plug wire boots (four in a row on top of the engine). DO NOT PULL ON THE WIRE only the rubber top. Make sure the wires are numbered, if not, number them. They MUST go back to the same hole they came out of after the new plugs are installed. Remove the spark plugs with a 16mm spark plug wrench. Install new plugs (any auto parts store can tell you what your options are here): Start threading the new plugs by hand so you don't cross thread the engine head by accident. Then complete tightening them gently. Spark plugs are supposed to be tightened to a specific torque: 13ftlbs in this case. If you choose to not use a torque wrench do not overtighten the plugs. Reinstall boots securely.

6-Cylinder: Remove engine cover, if present. Disconnect the six connectors on each of the ignition coils. Remove each of the six ignition coil bolts and then remove the coils by pulling straight up -- arrange them so that you know which goes back where. Remove and install the six plugs as described above. Reinstall the ignition coils with their bolts (torque: 69 in-lbs), then wires. Replace the cover.

Jun 11, 2010 | 1994 Toyota Camry

1 Answer

I removed my spark plug wires and forgot which wire goes with which plug for a 1998 toyota camry.


moz-screenshot.pngmoz-screenshot-1.pngmoz-screenshot-2.pngThe firing order is 1-3-4-2

Number one is the one at the pulley end of the motor and number 4 is at the flywheel end of the motor.

System uses a Distributorless Ignition System (DIS) with 2 ignition coils. Cylinders No. 1 and 4 use the same ignition coil. Cylinders No. 2 and 3 use the same ignition coil.

Jun 01, 2010 | 1998 Toyota Camry

1 Answer

Car started running bad with no power.So put fuel injection cleaner in and car started running better.So drove it about 20 miles and car went dead going about 30mph and would not crank back up, what is...


If this is a 4 cylinder, then its most likely the coil. Take out a spark plug and crank the engine to see if you have a good spark. If you don't have a spark, in order, replace the distributor cap and rotor, and replace the coil. If your ignition wires are old, replace them as well.

If its a 6 cylinder car, there is a separate coil for each cylinder, so your problem is more difficult to diagnose. In that case, if no cylinders are firing it may be the ignition computer or the ignition switch.

Jun 28, 2009 | 1996 Toyota Camry

2 Answers

Keeps mis-firing on cylinder #3 check engine light flashes and stays on car chugs on uphill slopes


check plugs wires for damage or just replace if you have replaced the #3 plug already if not replace it also

Aug 04, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
1999 Toyota Camry Logo

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...