Question about 1998 Mercury Grand Marquis

Open Question

Is there a relay that makes the ac, horn and the cruise go out at the same time?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fuse for cruise control?


Fuse #19 (15 amp) controls the cruise control. It also powers the horn so check your horn. If it works then check the cruise controls ground. If the fuse is good BUT the horn still doesn't work, then check the horn relay, as it also powers the cruise control. Check all wires/connections going to these parts also.

Feb 17, 2016 | 2002 Ford Taurus

2 Answers

My cruise control stoped working, my speedometer still works


cruise control have there own fuse check that ,make sure it is still hooked up to throttle ,check vacuum lines and power plugs , your speedo has nothing to do with cruise,also check that it is activated,test horn ,YES horn and cruise use same relay ,make sure your brake pedal is retracted ,and that brake lights work as well, good luck with it if I can be of further help get back to me ,hope I helped you.
Woody

Aug 27, 2014 | Cars & Trucks

2 Answers

Purchased 1996 Ford Crown Victoria. On driving it home the cruise control went out. Tried to reset and won't work, as well as the horn. What is the problem?


The horn relay is located toward the front of the engine. It is located just behind the radiator overflow reservoir and attached to the inner fender next to two other relays. It is the only one without a plastic cover over the top of it. FYI, our Crown Vic horn didn't blow, and the cruise didn't work. I changed the relay and still no horn. I decided to check the horns themselves. Found wires disconnected from terminals. Touched wire to horn terminal and horn blew incessantly. (previous owner had disconnected horn rather than diagnose why) Pulled the horn "button" from steering wheel and disconnected the wire leads and horn quit. Disassembled the "button" assembly. Foam had degraded over time between the contacts. (Ford has discontinued this part). Cleaned and replaced foam with Scotch foam mounting squares with holes punched out over contacts (2 layers thick). Re-assembled and viola! Horn and cruise control both work! Relay was bad as was horn button.

Mar 29, 2010 | 1996 Ford Crown Victoria

1 Answer

I don't know where relay horn and cruise control


there should also be a srs light on the dash illuminated?! the problem is the clock spring behind the steering wheel. happy holidays

Dec 28, 2009 | 1999 Honda Civic

1 Answer

2002 Saturn L100 No Cruise control, audio after panic horn


The body control module (BCM) controls the operation of the horn for the security system and remote keyless entry (RKE) functions. Circuit 28 is grounded by the BCM when the horn operation is desired. Normal operation of the horn is performed by the horn switch grounding the horn relay and is not controlled by the BCM.
You don't need to take this to a dealer ,besides there are no more saturn dealers . Try a independent repair shop .
Does the cruise control light light up when you turn the cruise on ? Have you checked the fuse's ?

Aug 08, 2017 | 2002 Saturn L-Series

2 Answers

1993 crown vic horn/cruise control won't work


Check the fuse for your cigar lighter/horn. I've seen the fuse blown from the lighter shorting. It will caue the cruie not to work also. I hope this helps. Good luck.

Aug 12, 2009 | 1993 Ford Crown Victoria

1 Answer

Horn and cruise control stopped working


The horn probably got water in it and this caused it to rust around the electro-magnet inside causing it to seize up. Replace the horn.

Jul 29, 2009 | Mazda MAZDA6 Cars & Trucks

2 Answers

My horn doesn't work for my 1988 Crown Victoria


check fuse and also check the wire going to the horn and check the inside of the horn too and check the ground

Jul 04, 2009 | 1988 Ford Crown Victoria

2 Answers

1988 Ford Crown Vic Horn Relay Location


The horn relay IS NOT located in a box toward the front of the engine. It is located just behind the radiator overflow reservoir and attached to the inner fender next to two other relays. It is the only one without a plastic cover over the top of it. FYI, our Crown Vic horn didn't blow, and the cruise didn't work. I changed the relay and still no horn. I decided to check the horns themselves. Found wires disconnected from terminals. Touched wire to horn terminal and horn blew incessantly. (previous owner had disconnected horn rather than diagnose why) Pulled the horn "button" from steering wheel and disconnected the wire leads and horn quit. Disassembled the "button" assembly. Foam had degraded over time between the contacts. (Ford has discontinued this part). Cleaned and replaced foam with Scotch foam mounting squares with holes punched out over contacts (2 layers thick). Re-assembled and viola! Horn and cruise control both work! Relay was bad as was horn button.

Jun 27, 2009 | 1988 Ford Crown Victoria

4 Answers

1988 Ford Crown Vic Lost Cruise Control


Although I don't think the cruise is an issue for safety, reach in under hood , or in grille area and find your horn(s) and just pull the connector off them temporarily, so they won't blow & put fuse back in and see if cruise starts to work again. It's not unusual for circuits to be labeled wrong or not at all in fuse panels. Then you can turn your attention to horn problem.

Jun 27, 2009 | 1988 Ford Crown Victoria

Not finding what you are looking for?
1998 Mercury Grand Marquis Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...