Question about 2004 Pontiac Montana
Owner's Manual page 2-26 : http://www.vadengmpp.com/owners-manual/pontiac/2004-Pontiac-Montana.pdf
This switch, located in the overhead console switchbank, is used for opening and closing the power rear quarter windows. Press the textured part of the switch to open the windows; both windows will open. The windows will continue to open as long as the switch is pressed, until they are fully opened. Press the part of the switch with the symbol to close both windows. The windows can be closed fully or partially, depending on how long the switch is pressed.
Posted on Apr 17, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.
I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp
Posted on Jan 06, 2009
I went to bulldogsecurity.com and looked up the wiring diagram for this vehcle. However, prior to checking this part, I would check to see if you have a blown fuse. It doesn't hurt and only takes a few minutes. There should be a fuse for that either somewhere on the side of the dash or near the brake pedal area. If not it may be under the hood, but it should be inside the vehicle. You may have multiple fuse boxes. If it has (2) sliding doors it will have a wire for the auto doors in each kick panel (under the plastic trim/molding) when you open the door and look down you will see all of the trim/molding it should snap out or may be held in place with a screw or (2). Once you remove that you should see the wires. It says for the left side it is either light blue or black and the right side is definitely light blue. Trace this wire until you find out where it ends (the motor or switch to control the auto doors) Then test the switch/motor to see if it is bad.
Posted on Mar 02, 2009
I beleive you need to change the Power Window Switches Module in the drivers side door panel, as these connections are interlinked within this module and it is usually the first part that fails. Especially that you already changed the switches & motor in the passenger door and it still does not work. Once you remove the dual switch module in the driver's side door, you will understand what I mean. Plus it is really easy to access. Good luck! I have the same model, Claude
Posted on Jun 16, 2010
Hi, Check the ground wires and also check switches wires to and from the doors. Check fuse pannel for bad fuse. To check these items use a digital volt/ohm meter.
Posted on Feb 25, 2012
Tips for a great answer:
Apr 16, 2014 | 2004 Pontiac Montana
Dec 21, 2013 | 1999 Pontiac Montana
Jul 26, 2013 | 2004 Pontiac Montana
Aug 17, 2012 | 2004 Pontiac Montana
Feb 24, 2012 | 2006 Pontiac Montana SV6
Sep 20, 2009 | 2004 Pontiac Montana
Sep 01, 2009 | 2004 Pontiac Montana
Feb 28, 2009 | 2003 Pontiac Montana
Jan 21, 2009 | 2004 Pontiac Montana
245 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: