Question about 2001 Ford Ranger

1 Answer

Do have . A egr. Valve on a 2001 ranger - 2001 Ford Ranger

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Ford Master
  • 10,875 Answers

Posted on Apr 18, 2015


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 333 Answers


The egr valve is located at the end of a hose that plugs into youe valve cover. It is pushed right into a rubber grommet that is located in one of the valve covers. I hope this helps. don.t forget to rate my nswer, thanks

Posted on Feb 27, 2009

  • 22246 Answers

SOURCE: egr valve on ford 98 ranger, ck. eng. light on

disconnect it and seal it off with a piece of broom handle in the inlet side.sounds drastic i know but it works.

Posted on Mar 04, 2009

  • 2984 Answers

SOURCE: egr valve

The EGR Valve is #4:


Please don't forget to rate!

Posted on May 19, 2009

  • 1 Answer

SOURCE: where is the egr valve on a 2001 bonneville

upper left corner of the intake 6" round 2 bolts sourounded by a half rounded sheld

Posted on Aug 16, 2009

  • 630 Answers

SOURCE: 2001 Stratus: where is the egr valve loated on my stratus 2001 3...

should be on the intake manifold should be a dish looking shaped part... go online and pul;l a pic of one up on a parts page to help identify... also check with Auto Zone parts house as they will give you a print out of its exact location and the part if they have it in stock.

Posted on May 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the egr valve located on a 1994 Ranger 4.0L V6?

If your ranger has a egr valve it will be on the driver's side of the upper intake plenum (the top aluminum housing, very top of the motor) and about centered on the 1994 I have seen Rangers with and without a egr valve. I believe it depends on if its California emissions or not.

Dec 31, 2010 | Ford Ranger Cars & Trucks

1 Answer

Have a 01 Ford Ranger with code of "P0401 EGR flow insufficient". I have replaced my EGR valve twice in 6 months. What is causing the EGR valve to fail so frequently? This has a 3 liter V-6, automatic.

The problem is now most likely a clogged port in the Intake manifold. In the region of the Airhorn, there is a port or passage that supplies the EGR flow. You need to take off the part that the EGR is bolted to and clean any grooves and gaskets in that area. This is not as bad of a job as in the past, because the air and water systems are usually separate.

The onboard computer is not foolproof. The problem in many different brands is where the sensors are placed. The computer blames the EGR for a low flow and the sensor is downwind from the EGR. The problem is upwind of the EGR at the clogged passage feeding the EGR. The EGR can not possibly put out more than it gets. There is no sensor ahead of the EGR valve.

There are several solenoids which control the opening of the EGR. They have vacuum lines which connect to the EGR. Usually they are a different Error code when they do not work.

You can get a free scan at Autozone or Oreillys and have the info for the place that sold you the EGR. If you bought a defective EGR it may have a Warranty. Good luck on this.

Oct 09, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

On my owners manual is says ignition timing not adjustable so i cant do my timing, cuz i just changed my spark plugs and the wire but truck still shakes . I own a 2001 ford ranger 4.0 v6 edge

so its not the plugs, then check the injector signal with a noid light, also check the egr valve , fuel pressure, find out what is not wrong and it will lead you to what is

May 11, 2010 | 2001 Ford Ranger Regular Cab

2 Answers

P0403 what to do

The dpfe sensor of the egr system has failed you.This is not an egr valve problen rather the sensor has i mentioned . The part runs about $ 65:)

Aug 26, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

My egr valve

driver side front of intake hidden by black plastic cover look for small hose coming from exhaust to egr valve

May 19, 2009 | 1993 Ford Ranger SuperCab

1 Answer

Egr valve

The EGR Valve is #4:


Please don't forget to rate!

May 19, 2009 | 1993 Ford Ranger SuperCab

2 Answers

Need location of the erg sensor 2000 ford ranger

The egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR pressure sensor. It's location varies depending on the engine you have. You can fine this sensor by following the vacuum hose on the EGR valve. It will be with in inches of the EGR valve. The sensor will be black (plastic) or silver (metal), have two or three vacuum ports and an electrical connection on it.

The vacuum pressure sensor is a high failure item on fords. Any Ford parts department will have one in stock, as well as some aftermarket parts stores.

The new sensor may not look exactly the same as the old part, but will have all the hook ups as the old one. You may also need to replace the vacuum hose to the sensor as well

Feb 24, 2009 | 2000 Ford Ranger SuperCab

2 Answers

Location of the egr sensor on 2000 ford ranger

The EGR pressure sensor is located within inches of the EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts.

Feb 24, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
2001 Ford Ranger Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides