Question about Ford Ranger

Open Question

Is there a egr valve on a 3,0 ranger - Ranger Ford Cars & Trucks

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22326 Answers

SOURCE: egr valve on ford 98 ranger, ck. eng. light on

disconnect it and seal it off with a piece of broom handle in the inlet side.sounds drastic i know but it works.

Posted on Mar 04, 2009

Ad
c17hydro
  • 2984 Answers

SOURCE: egr valve

The EGR Valve is #4:

0521ced.gif

Please don't forget to rate!

Posted on May 19, 2009

  • 116 Answers

SOURCE: my egr valve

driver side front of intake hidden by black plastic cover look for small hose coming from exhaust to egr valve

Posted on May 20, 2009

  • 5687 Answers

SOURCE: Have a 01 Ford Ranger with code of "P0401 EGR flow

The problem is now most likely a clogged port in the Intake manifold. In the region of the Airhorn, there is a port or passage that supplies the EGR flow. You need to take off the part that the EGR is bolted to and clean any grooves and gaskets in that area. This is not as bad of a job as in the past, because the air and water systems are usually separate.

The onboard computer is not foolproof. The problem in many different brands is where the sensors are placed. The computer blames the EGR for a low flow and the sensor is downwind from the EGR. The problem is upwind of the EGR at the clogged passage feeding the EGR. The EGR can not possibly put out more than it gets. There is no sensor ahead of the EGR valve.

There are several solenoids which control the opening of the EGR. They have vacuum lines which connect to the EGR. Usually they are a different Error code when they do not work.

You can get a free scan at Autozone or Oreillys and have the info for the place that sold you the EGR. If you bought a defective EGR it may have a Warranty. Good luck on this.

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the egr valve located on a 1994 Ranger 4.0L V6?


If your ranger has a egr valve it will be on the driver's side of the upper intake plenum (the top aluminum housing, very top of the motor) and about centered on the plenum.in 1994 I have seen Rangers with and without a egr valve. I believe it depends on if its California emissions or not.

Dec 31, 2010 | Ford Ranger Cars & Trucks

1 Answer

Have a 01 Ford Ranger with code of "P0401 EGR flow insufficient". I have replaced my EGR valve twice in 6 months. What is causing the EGR valve to fail so frequently? This has a 3 liter V-6, automatic.


The problem is now most likely a clogged port in the Intake manifold. In the region of the Airhorn, there is a port or passage that supplies the EGR flow. You need to take off the part that the EGR is bolted to and clean any grooves and gaskets in that area. This is not as bad of a job as in the past, because the air and water systems are usually separate.

The onboard computer is not foolproof. The problem in many different brands is where the sensors are placed. The computer blames the EGR for a low flow and the sensor is downwind from the EGR. The problem is upwind of the EGR at the clogged passage feeding the EGR. The EGR can not possibly put out more than it gets. There is no sensor ahead of the EGR valve.

There are several solenoids which control the opening of the EGR. They have vacuum lines which connect to the EGR. Usually they are a different Error code when they do not work.

You can get a free scan at Autozone or Oreillys and have the info for the place that sold you the EGR. If you bought a defective EGR it may have a Warranty. Good luck on this.

Oct 09, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

Where is the location of the egr valve on a standard 4x4 93 ford ranger?


62a387d.jpg

Fig. 3: Exploded view of the EGR system and related components for the 3.0L engine



e302e23.jpg

Fig. 4: Exploded view of the EGR system and related components for the 4.0L engine

Hope helps (remember rated and comment this).

Sep 12, 2010 | Ford Ranger Cars & Trucks

1 Answer

My egr valve


driver side front of intake hidden by black plastic cover look for small hose coming from exhaust to egr valve

May 19, 2009 | 1993 Ford Ranger SuperCab

1 Answer

Egr valve


The EGR Valve is #4:

0521ced.gif

Please don't forget to rate!

May 19, 2009 | 1993 Ford Ranger SuperCab

2 Answers

Need location of the erg sensor 2000 ford ranger


The egr valve has two sensors. One is an EGR position sensor which is physically attached to the EGR valve. The other sensor is the DPFE (Delta Pressure Feedback EGR) sensor, commonly called the EGR pressure sensor. It's location varies depending on the engine you have. You can fine this sensor by following the vacuum hose on the EGR valve. It will be with in inches of the EGR valve. The sensor will be black (plastic) or silver (metal), have two or three vacuum ports and an electrical connection on it.

The vacuum pressure sensor is a high failure item on fords. Any Ford parts department will have one in stock, as well as some aftermarket parts stores.

The new sensor may not look exactly the same as the old part, but will have all the hook ups as the old one. You may also need to replace the vacuum hose to the sensor as well

Feb 24, 2009 | 2000 Ford Ranger SuperCab

2 Answers

Location of the egr sensor on 2000 ford ranger


The EGR pressure sensor is located within inches of the EGR valve. The exact location varies depending on the engine (2.5L, 3.0L or 4.0L). It is usually attached to the upper intake manifold with two small bolts.

Feb 24, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...