Question about Dodge Cars & Trucks

Open Question

05 dodge 5.9 code 35: APS relay output circuit open. What's wrong?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
MrScary66613
  • 1990 Answers

SOURCE: fan control relay error code 35 1995 Voyager

Locate the Fuse Relay Box under the Hood and Locate the Fan Relay and Change it from this Box. The Diagram should be inside the Lid for the Box or in the Owners Manual. Please Rate My Response! Thanks!

Posted on Feb 05, 2009

Ad
cansmo
  • 2431 Answers

SOURCE: asd relay not operating

The ASD is what powers the fuel pump relay you need to check the engine fuse box junction for open fuse especially the fuel pump fuse and the ignition fuse. Get the ASD power corrected and the fuel pump injectors coil and reference will be back in action,check the fuse especially fuse No.23

Posted on Mar 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suddendly start running rough and worser on overdrive. Iused scanner it showed p205,p2609and p2149.Please tell me what to do.


Dodge Ram 3500 Questions - I have an 05 ... - CarGurus

www.cargurus.com > Questions > Dodge > Ram 3500

CarGurusAug 28, 2012 - I'm getting a code P2149 fuel injector group B supply volt... ... I'm getting a code P2149 fuel injector group B supply voltage circuit/open. ... 2005 dodge ram 1500 won't move when in gear 38 answers.

Question on codes p0202 and p2149 - Chevy and GMC Duramax Diesel Forum

www.duramaxforum.com > ... > 04.5-05 LLY Duramax Powertrain

Dec 5, 2009 - 6 posts - ‎4 authors
Hi got a 05 3500 running really ruff and throwing 2 codes p0202. ... Number #2 injector Drive fault, incorrect current on a fuel injector circuit (the ...

breaking down on freeway code p2149 - Chevy and GMC Duram


Dec 05, 2015 | Cars & Trucks

2 Answers

Hyundai santa fe 2001


Car error codes::


Diagnostic Trouble Code Storage Condition Remedy
P0100 Mass Air Flow Sensor Voltage High C-8
P0100 Mass Air Flow Sensor Voltage Low C-8
P0110 Intake Air Temperature Voltage High C-10
P0110 Intake Air Temperature Voltage Low C-10
P0115 Coolant Temperature Voltage High C-9
P0115 Coolant Temperature Voltage Low C-9
P0120 Throttle Position Sensor (TPS) Voltage High C-7
P0120 Throttle Position Sensor (TPS) Voltage Low C-7
P0130 O2 Sensor 1 Circuit Voltage High C-30
P0130 O2 Sensor 1 Circuit Voltage Low C-30
P0130 O2 Sensor 1 Open Circuit C-30
P0150 O2 Sensor 2 Circuit Voltage High C-31
P0150 O2 Sensor 2 Circuit Voltage Low C-31
P0150 O2 Sensor 2 Open Circuit C-31
P0201 Injector Valve 1 Voltage High C-20
P0201 Injector Valve 1 Voltage Low C-20
P0201 Injector Valve 1 Open Circuit C-20
P0202 Injector Valve 2 Voltage High C-21
P0202 Injector Valve 2 Voltage Low C-21
P0202 Injector Valve 2 Open Circuit C-21
P0203 Injector Valve 3 Voltage High C-22
P0203 Injector Valve 3 Voltage Low C-22
P0203 Injector Valve 3 Open Circuit C-22
P0204 Injector Valve 4 Voltage High C-23
P0204 Injector Valve 4 Voltage Low C-23
P0204 Injector Valve 4 Open Circuit C-23
P0205 Injector Valve 5 Voltage High C-24
P0205 Injector Valve 5 Voltage Low C-24
P0205 Injector Valve 5 Open Circuit C-24
P0206 Injector Valve 6 Voltage High C-25
P0206 Injector Valve 6 Voltage Low C-25
P0206 Injector Valve 6 Open Circuit C-25
P0230 Fuel Pump Relay Voltage High C-6
P0230 Fuel Pump Relay Voltage Low C-6
P0230 Fuel Pump Relay Open Circuit C-6
P0325 Knock Signal Circuit 1 C-26
P0330 Knock Signal Circuit 2 C-26
P0335 No Engine RPM Signal C-32
P0335 Incorrect RPM Signal C-32
P0340 Hall Sensor Voltage High C-15
P0340 Hall Sensor Voltage Low C-15
P0403 EGR Valve Voltage High C-28
P0403 EGR Valve Voltage Low C-28
P0403 EGR Valve Open Circuit C-28
P0410 Secondary Air Pump Voltage High C-27
P0410 Secondary Air Pump Voltage Low C-27
P0443 Fuel Tank Ventilation Valve Voltage High C-29
P0443 Fuel Tank Ventilation Valve Voltage Low C-29
P0443 Fuel Tank Ventilation Open Circuit C-29
P0500 Vehicle Speed Signal C-42
P0505 Idle Air Control Voltage High C-33
P0505 Idle Air Control Voltage Low C-33
P0550 Power Steering Voltage High C-14
P0550 Power Steering Voltage Low C-14
P0560 Battery Voltage High C-4
P0560 Battery Voltage Low C-4
P0602 Control Module Programming Error C-2
P1110 Intake Manifold Valve 1 Voltage High C-34
P1110 Intake Manifold Valve 1 Voltage Low C-34
P1111 Intake Manifold Valve 2 Voltage High C-35
P1111 Intake Manifold Valve 2 Voltage Low C-35
P1230 Power Supply Relay Secondary Circuit C-3
P1405 EGR Valve Feedb. Voltage High C-28
P1405 EGR Valve Feedb. Voltage Low C-28
P1405 EGR Valve Feedb. Incorrect Signal C-28
P1501 Immobiliser No or Wrong Coding C-5
P1502 Immobiliser No Signal C-5
P1503 Immobiliser Wrong Signal C-5
P1530 A/C Relay Voltage High C-41
P1530 A/C Relay Voltage Low C-41
P1600 Reprogram or Replace Electronic Control Unit (ECU) C-2
P1602 Knock Control Module; Replace ECU C-2
P1690 Check Light Voltage High C-43
P1690 Check Light Voltage Low C-43
P1690 Check Light Open Circuit C-43
P1740 Torque Control Voltage Low C-40
P1740 Continuous Torque Control C-40

These are the error codes:

Jul 08, 2008 | 2001 Hyundai Santa Fe

1 Answer

Blown 40 amp cooling fan fuse 96 dodge caravan


code 35-Radiator fan control relay circuit-open or short detected in the low speed radiator fan relay control circuit.

Nov 20, 2015 | Dodge Cars & Trucks

1 Answer

I'm getting a F707B and F707A (APS Relay - Contall circuit open) error code on Dodge Ram diesel. Any idea what could this be? Truck runs great - just the AC on passanger side does not work as well as on...


sounds like a wire is disconnected somewhere, check for melted wires, or one that has a lot of grit or corrosion on it. Use a good electrical cleaner. Clear codes and retry your diagnostics test.

Sep 07, 2013 | 2005 Dodge Ram 3500

1 Answer

1999 Dodge Neon Issues (HELP)


Here's a link to the P0340 code,and P1491.Powertrain Diagnostics Manual P-1491 Radiator Fan control relay circuit
Set condition: An open or shorted condition is detected in the radiator fan relay control circuit.

Possibilities:
Fan relay ground circuit open
Fused B+ circuit open
Rad fan control relay defective
RF relay output circuit volt cycles over to batt voltage
RF relay control circuit open
RF relay ctrl rly ckt wir harness observable or intermittant defect
RF relay ctrl ckt short to ground
Defective PCM

Get out your Multimeter.

Mar 22, 2013 | 1999 Dodge Neon

1 Answer

What does codes 64 63 11 09 and 21 0n 2005 dodge stratus mean


CODE 11 No distributor referene signal detected during engine cranking....Check circuit between the distributer and the pcm.

CODE 12 Problem with battery connection.Direct battery input to pcm disconnected within the last 50 ignition key-on cycles.

CODE 13** Indicates a problem with map sensor vacuum system.

CODE 14** map sensor voltage to high or to low.

CODE 15** Problem with vehicle speed sensor signal.No vss signal detected during road load conditions.

CODE 17 Engine is cold to long.Engine coolant temp stays below normal operating temp(check thermostat).

CODE 21** Problem with oxygen sensor signal circuit.Sensor voltage to computer not fluctuating.

CODE 22** Coolant sensor voltage to high or to low.Test coolant temp sensor.

CODE 23** Indicates that the air temp sensor input is below the minimum acceptable voltage or sensor input is above the acceptable voltage.

CODE 24** Throttle position sensor voltage to high or low.Test the tps.

CODE 25** Idle air control (IAC) valve circuits.A shorted condition is detected in one or more of the IAC valve circuits.Or a vacuum leak has been detected.

CODE 27 One of the injector control circuit output drivers does not respond properly to the control signal.Check the circuits.

CODE 31** Problem with canister purge solenoid circuit.

CODE 32** An open or shorted condition detected in the EGR solenoid circuit.Possible air/fuel ratio imbalance not detected during diagnosis.

CODE 33 Air conditioning clutch relay circuit.An open or shorted condition in the compressor clutch relay circuit.

CODE 34 Open or shorted condition in the speed control vacuum or vent solenoid circuits.

CODE 35 Open or shorted condition detected in the radiator fan low speed relay circuit.

CODE 37** Open or shorted condition detected in the torque converter part throttle unlock solenoid control circuit.

CODE 41** Problem with charging system.An open or shorted condition detected in the generator Field control circuit.

CODE 42 Fuel pump relay or auto shutdown relay (ASD) control circuit indicates an open or shorted condition.

CODE 43** Multiple cylinder misfire detected.Peak primary circuit current not achieved with the maximum dwell time.

CODE 44 Battery temperature sensor volts malfunction.Problem with the battery temperature voltage circuit in the pcm.

CODE 46** Charging system volts to high>Computer indicates that the battery voltage is not properly regulated.

CODE 47** Charging system voltage to low.Battery voltage sense input below target charging voltage during engine operation and no significant change in voltage detected during active test or alternator output.

CODE 51** Oxygen sensor signal input indicates lean air/fuel ratio condition during operation.

CODE 52** Oxygen sensor signal input indicates rich air/fuel ratio during engine operation.

CODE 53** internal pcm failure detected.

CODE 54** No camshaft position sensor signal from distributer.Problem with the distributer synchronization circuit.

CODE 55 Completion of fault code display on check engine lamp.this is end of message code.

CODE 62 Unsuccessful attempt to update EMR mileage in the controller EEPROM.

CODE 63** Controller failure.EEPROM write denied.Check the PCM

Dec 12, 2012 | 1995 Dodge Stratus

1 Answer

My problem is vehickle code po205


Trouble Code: P0205

Injector 1, 2, 3, 4, 5, or 6 Control
Possible Causes:


ASD relay output circuit failure. Fuel injector has malfunctioned or failed. Fuel injector control circuit is open or shorted to ground. PCM has failed.Here is the code from the Dodge repair guide..

Oct 12, 2012 | 2001 Dodge Intrepid

2 Answers

What does the code p0442,p0456,p0700,p0645,p0481,p0340


CODE PO442 - EVAP SMALL LEAKED DETECTED. CODE PO456 - LEAK IN EVAP SYSTEM DETECTED. POSSIBLE CAUSES / VACUUM HOSE CONNECTIONS OR SWITCHES HAVE COME LOOSE OR MALFUNCTION / EVAP EMISSION SYSTEM HAS A LEAK / EVAP PURGE SOLENOID OPERATION HAS MALFUNCTION / NVLD SWITCH OPERATION HAS MALFUNCTION / CODE PO 700 - AUTOMATIC TRANSMISSION FAULT DETECTED .POSSIBLE CAUSE TRANSMISSION CONTROL MODULE RELATED SENSOR HAS SOLENOID IS DAMAGED OR HAS FAILED.TRANSMISSION CONTROL MODULE FAILED OR POWER CONTROL MODULE HAS FAILED.YOU TAKE VECHICLE TO DEALERSHIP THEY WILL TO SCAN TRANSMISSION. CODE PO645 - AC CLUTCH RELAY CIRCUIT MALFUNCTION . POSSIBLE CAUSE.INTERNALLY FUSED IGNITION SWITCH OUTPUT CIRCUIT IS FAULTY. AC RELAY CLUTCH CONTROL CIRCUIT IS OPEN OR IT IS SHORTED TO GROUND. AC RELAY CLUTCH POWER SUPPLY FUSED IGNITION CIRCUIT IS OPEN. AC RELAY IS DAMAGED OR IT HAS FAILED.PCM HAS FAILED. CODE PO481 - HIGH SPEED NUMBER 2 FAN RELAY CONTROL CIRCUIT. POSSIBLE CAUSE HI FAN RELAY POWER CIRCUIT IS OPEN FROM THE RELAY TO FUSED POWER.HI FAN CONTROL CIRCUIT IS OPEN OR SHORTED TO CHASIS GROUND. FAN RELAYS FAILED. PCM HAS FAILED. CODE PO340 - NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE. POSSIBLE CAUSE CMP SENSOR CONNECTOR IS DAMAGED OPEN OR IT IS SHORTED. CMP SENSOR SIGNAL CIRCUIT IS OPEN OR SHORTED TO GROUND OR TO BATTERY VOLTAGE OR 5 VOLT SUPPLY CIRCUIT. CMP SENSOR 5 VOLT SUPPLY CIRCUIT IS OPEN OR SHORTED TO GROND OR TO BATTERY VOLTAGE. CMP SENSOR GROUND CIRCUIT IS OPEN. CKP SENSOR IS DAMAGED OR HAS FAILED.PCM HAS FAILED. SOUND LIKE PROBLEM IS PCM GROUND WIRE BROKEN OR LOOSE OR PCM HAS FAILED.

Nov 16, 2010 | 2004 Dodge Intrepid

2 Answers

My check engine is on and the codes that I get are 35 & 55 - what do these codes mean


code 35 is a problemin the cooling fan relay it is either open or shorted code 55 means end of code output,or to say there are no more codes. Ray

Nov 09, 2009 | 1995 Dodge Intrepid

1 Answer

Plymouth voyager 1994 check engine code 34 35 5


34 = Speed Control Solenoid Circuits: An Open or Shorted Condition has been detected in the Speed Control Vacuum or Vent Solenoid Circuits.
35 = Radiator Fan Relay Circuit: An Open or Shorted Condition has been detected in the Radiator Fan Relay Circuit.
That 5 at the end should have had another 5 after. Did it? 5-blinks and 5-blinks means the system has finished sending the Codes.

Oct 31, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...