Question about Cars & Trucks

1 Answer

I need torque settings for head gasket - Cars & Trucks

Posted by on

  • Joe Crandall
    Joe Crandall Apr 17, 2015

    Need the year make and model of the engine ou aRe working on. Please give as much info as you can so that you get a correct and sure response. Joe C

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

Follow this link and click toequ tqbles
http://www.speedwayautoparts.com/index35.htm

Posted on Apr 17, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone help? i need torque settings for head gasket and settings for inlet tappets and exusht


Find complete torque specs here:
http://fme-cat.com/LiveDocs/99999.pdf
and don't forget that you MUST buy new head bolts since they are torque to yield and MUST OT be reused!!

I suspect that you at least need to check the valve lash but as long as your head gasket is not dramatically different than original (which it should not be because that would change your compression ratio) you should be close to okay (I would check it). Or if you had any machine work done to the head, in which case you certainly would need to adjust the valve lash.

Feb 03, 2015 | 2005 Ford Focus

1 Answer

What is the torque settings for a mitsubishi colt hiline 2.0i cylinder head?


There is no torque value. Commonly, Head bolts are tightened and then removed in sequence as you step threw 3 values: 23/33/45 ft lbs then the final value is achieved by rotating the bolts 90 degrees so the final value is unknown.

You have to get either a hayes manual or follow a procedure online if you are replacing the head gasket. If you are not replacing the gasket do not "re-torque" the head bolts thinking that you can fix a head gasket leak.

Jul 29, 2014 | 2005 Mitsubishi Colt 1.1

1 Answer

I need to know how to find/set timing marks for 2002 Kia Sedona and head bolt torque specs


The head bolt torque on a 2002 Kia Optima is 45 ft/lbs of torque. Always make sure you use a good torque wrench to get it right. ------------------------------------------------------------------------------------
Original Launch X431 Master

Mar 13, 2013 | Cars & Trucks

1 Answer

Hi. I am assembling a avanza 1.3 that blew head gasket. What are the torque settings for head bolt


I don't have the specs.Evenly go around to all of the head bolts and gradually torque them. 20,40 60 foot pounds.
Depending on the type of gasket you used,you may have to re-torque the bolts after it has gone through one heat cycle.

Mar 08, 2013 | 2007 Toyota Avanza 1.3

1 Answer

Geting warter in lifter going to oil pan


Head gasket is not sealing water jacket. Coolant is seeping into the push rod hole down to the lifter. Somthing went wrong with the gasket when setting head onto block. Did you ding the gasket?.OR it's possible you got the wrong gasket. You might just get lucky if you try torquing the head bolts again. Or is it possible one of the bolts did not get torqued? One last thought, any chance the head was warped and you did not get it machined? Either way, if re torquing the head bolts does not fix it, you will have to pull the head, look real close at the gasket, probably will need to get a new gasket, check the head for trueness (flat mating surface),use a quality gasket sealer on both side of it, replace all... Yea, simple right? [Not.] Good luck with it.

Dec 07, 2012 | Cars & Trucks

3 Answers

How do you replace the head gasket


with great difficultry, It is verry time consuming end verry costly to have it (Replaced)

Nov 27, 2012 | 2000 Kia Sportage

1 Answer

Torque settings for head gasket on LDV convoy 400 2,5ltr ford engine


I can tell you one thing for sure these are torque to yield bolts and they must be replaced, you can't use them over or the head gasket will leak very quickly or the bolt will snap on install..

Jul 13, 2012 | Cars & Trucks

1 Answer

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...