Question about 2010 Chrysler Town and Country
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: power seat, driver side
If only one seat is not working the fuse/relay is ok or both would not work, most likely cause based on experience is the control switch, then the power seat motor.
Posted on Sep 21, 2008
SOURCE: driver window switch
its very rare for the window switches to go bad. the most common part to go bad is the window motor. the motor for that van can only be replaced as a regulator assm, from the dealer or used. if you move the switch and nothing happens check the connections at the motor while operating the switch in both directions. to verify the circuit wiring is ok. connect your test lamp to only the two wires in the connector not on the body or anywhere else for a ground as that will give the appearance of a bad wire in one direction. if you have a light while operationg the switch then replace the motor/regulator assm.
Posted on Jan 11, 2009
Sometimes a coin gets trapped in the track, remove the seat and check, and clean and lube the track, some times all it needs is a little lube, or it might be the seat motor that is bad, you have to unbolt the seat to find out.
Posted on Mar 19, 2009
Memory selector is on driver's door, First set driver 1 seat and mirror positions, then press and release memory "s" button. then press and release memory selector "1" button. repeat for # 2 driver substituting memory selector 2 in step 2. hope this will help you
Posted on Jan 26, 2010
Testimonial: "Thanks so much . Your advice was spot on."
HAVEK 1005 sounds right on track.... but also try this, usually works well for non functional power windows, specially Caravans.
NO COST PROCEDURE TO FIX IT:
1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.
7. Repeat 3-6 if necessary, but usually the first try works!
NOW, for the naysayers that says you must replace power window motors etc, at $$$ cost because the above fix does not work, or is not long lasting fix, or less than a "professional fix".... Well then, when the window fails to operate again, apply same fix again at that time.
I have fixed my van this way numerous times (usually once a year), and to all local friends I recommend this fix too, likewise do the same and are happy with the solution.
Posted on Jul 17, 2010
Tips for a great answer:
Oct 07, 2015 | Chrysler Cars & Trucks
Jan 14, 2013 | 2002 Chrysler Town & Country
Sep 12, 2012 | 1996 Chrysler Town & Country
Jul 11, 2011 | 2005 Chrysler Town & Country
Feb 22, 2011 | 2000 Chrysler Town & Country
Mar 19, 2010 | 2005 Chrysler Town & Country
Aug 30, 2009 | 2002 Chrysler Town & Country
Feb 05, 2009 | 2001 Chrysler Town & Country
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: