Question about 2000 Nissan Pathfinder

1 Answer

Bake lights and turn signals not working-would a bad four way flasher switch cause this

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 1,326 Answers

No separate circuits. Turn signals use a relay type
bake lights and turn signals not working-would a b - 25650212-40fz4ccuztv1qq4o4txoo1x0-4-0.jpg Brake light use a switch

Posted on Apr 16, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn the signal lights for left or right turn the emergency flasher start flashing all four turn signal lights. the emergency flashers work ok


ck your turn signal switch wiring connector because it is more than likely has been hot and melted some connections.

Oct 18, 2014 | 2000 Kia Sportage

2 Answers

What would cause the turn signals to work sometimes and sometimes not ?


A bad flasher relay would do that. They are usually located on the fuse panel and plug into it.

Jun 27, 2014 | 1992 Ford Tempo

1 Answer

2001 Town & country brake lights not working, but the third brake light and tail lights are working. I also just replaced the brake light switch thinking it was the problem, but it wasnt


I think the brake light and turn signal are on the same bulb on these, correct?

If so do the turn signals work?

If they do than I would bet that the turn signal switch itself is the problem. The power for the brake lights is routed through the switch (except for the third brake light that is supplied power directly form the brake switch). The turn signal switch will interrupt power from the brake switch and supply power from the turn signal flasher depending on if the right or left turn signal is engaged.

Sometimes wiggleing the lever or pushing the four way flasher button with the brake pedal depressed will intermittantly cuase the brake lights to work. If this is the case than it is the turn signal switch that is causing the problem.

Feb 11, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

I drive a 2000 mitsu. mirage. my turn signals just stopped working. i checked the bulbs the fuses they're good. the emergency flashers work im wondering if maybe its the turning module but i dont know...


The emergency flasher switch is also the turn signal flasher It pops out of the dash and can be replaced easy. do chaeck the fuses before going to this much troble. check all the fuses as some work backup circuits that you wouldn;t think would be important. Before replacing the flasher switch ( you may only be able to buy it from the dealer) work the switch several times and the flashers will come on cheak to see if allthe lights work thenturn the flashers off and see ( with the key on if the turn signals now work. Now if during the test with the four way flashers you see a bulb or more out you know that the turn signals wouldn't work, but the four ways will. they work on different fuses so chak the turnsignal fuse too. after cycling the switch try the turn signals again as the switch is likly to stick and sometimes cycling it will get the turn signals working again. Fooling around with the switch you may find a position that the turn signals work. if you can't get it to stay working then you'll have to change the flasher emergency switch.

Sep 30, 2010 | Mitsubishi Mirage Cars & Trucks

1 Answer

Where is the turn signal flasher located for a 97 cadillac deville.


to the left of the steering collum connected to the under collum kick panel as you take the panel down it'll be connected to the cover, It's not a genaric flasher, it's square and looks like a relay585157684.jpgCost about 6 bucks at the parts store. If the turn signals aren't flashing and they do come on, and may be they flash on one side and not the other then it's not the flashers fault. All the light bulbs have to work or it won't flash and thats how you know that thiers a bulb out. Turn on the four ways flashers (Hazard lights ) and walk arounf the car and see if thier all working and flashing brightly. They'll flash anyway on four way the switches are known to hang in hazard and not work right on turn signal so try switching ti a few times and maybe it'll straighten out. If it flashes at all the flasher is good and if they don't even light not on hazard or turn the flasher and or the fuse is bad.

Sep 17, 2010 | 1997 Cadillac DeVille

1 Answer

Have four way flashers in front of car but no turn signals on front or rear of car but yet i still have parking lights and brake lights and have replaced the bulbs and the fuses are not bad and the flasher...


The most common cause of your problem is the Flasher Unit. Functioning four way flashers doesn't mean the existing unit is working. Also, there are multiple flasher units on some cars. Since the bulbs are all working, replacing the flasher unit makes the most sense.

Dec 11, 2009 | 1994 Chevrolet Cavalier

1 Answer

Brake lights and turn signals stopped at same time... the 4 ways don't flash either


well i just fix a 2002 vette with no turn signals and no 4 ways,,it was the four way flasher was bad and thats part of the 4 way switch,,,but the brake lights work,,i think you might have a bad IPC,instrument panel cluster,,that controls everything,,the 4 ways flasher only control 4 ways and turn signals,,,so i dont think you prob is the flasher i think its internal to the IPC,,i rec take to chevy dealer get it checked

Oct 13, 2009 | 2001 Chevrolet Corvette

1 Answer

Signals and Four Way Flasher working intermittently


Replace the hazard switch, It has the turn signal flasher built in to it.

Apr 09, 2009 | 2003 Chevrolet Monte Carlo

2 Answers

96 ford tarus turn signal


The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.

You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.

Nov 19, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
2000 Nissan Pathfinder Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...