Question about 2000 Ford Expedition

2 Answers

I need to know how to set the idle speed on a 2000 expedition

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 21,873 Answers

The idle is computer controlled, so its not really adjustable.

Posted on Apr 16, 2015

  • Terrance Apr 16, 2015

    I hear its a way to speed it up or slow it down.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 454 Answers

Have you tried cleaning your mass air flow filter. Easy to clean. Use carbuerator spray

Posted on Apr 24, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 Expedition is idling badly and stalling.


Have you changed your fuel filter? When is the last time you changed your sparkplugs? Have you had any codes on the computer? Heres what I would do. First change your sparkplugs. This is a 4-6 hour job. You have to unbolt the cop(coil on plug assembly). After you change the plugs your truck will run rough. Drive it around the block then back to your house. It will take 3-5 restarts before your truck quits running rough. Reason for this is because your computer is trying to "relearn" the firing order. I have done this several times so i know what i am talking about. You can even look it up. Your 2000 expedition is a dang good truck with a great engine. After your computer relearns the firing order then the rough idle will be gone. Then I would take it out on the freeway and run it hard for 5-10 miles. If you experience a miss or two then that means you need a new cop(s). Get a code reader and it will tell you which cop is bad. Cops are expensive. I bought 6 new ones on ebay for $40. If you buy from autozone or ford dealer then you are looking at about 80-100 bucks a piece. Tell me if this helps. Ford makes a good truck and the expedition is a great truck. Mine is a 2000 expedition also. I have 248,000 miles on it and running strong with no burning oil. Good luck.

Apr 15, 2015 | 2000 Ford Expedition

1 Answer

My mechanic said that i need to have my 2001 expedition flashed to keep it from idling so rough


its not true. you can find if its a air leak with carb cleaner spray it around the inlet side and air pipe's any change in engine speed then you have a leak were you last sprayed. but i'm thinking you have a dirty idle control my self on the intake (air line from the filter to the engine ) sits on the manifold you will see an set of wires one set go to the throttle control, and another set will go to the idle control. this is the part that will need to be removed. when removed clean with carb cleaner and a cloth give it a good spray inside leave to soak and then shake out and wipe do this a few times.clean the inside of the intake samway but with out the shake (bit hard to do with the engine). also there is a air line at the middle check this it can get blocked make sure this is clear. when you put this all back on it will be a bit harder to start that is the carb cleaner. should be fine after this if not come back. this should work unless you are having problems though differnt speeds.

Feb 23, 2014 | 2001 Ford Expedition

1 Answer

When i drive my 2003 expedition there is low idling but when i come to a stop the engine will shut off. what may be the cause of that


The issue is most likely the setting at which you idle throttle is set at. When you come to a stop, your brake system takes power, and if the idle speed is too low, then the call for power will stall the engine. To fix this, look for where the throttle cable connects to the throttle body. Where it connects will be a screw that you can turn that will change the angle of the throttle plane. This is called a set screw, so be sure you are not turning a screw that holds the throttle assembly together. The screw most likely has a spring in between the head of the screw and the throttle plane. To adjust this properly, turn the engine on with the hood open. Keep the engine on and adjust the screw left or right until the RPM indicator points right above 1000 RPM. A good idle speed for a SUV is 1200 RPM.

Sep 01, 2011 | 2003 Ford Expedition

1 Answer

When the ac and or heater is on the expedition will not idle righ


Do the procedure below to help clear up this problem, it is caused by a sludged up intake tract and idle speed control valve.

Feb 22, 2011 | 2000 Ford Expedition

1 Answer

2000 Ford Expedition-Left turn signal and brake light in rear does not work, and left front flasher works but flashes quickly. The front and rear right side of turn signal and brake works perfectly. I...


You may have some wiring 'grounding' problems in the areas of concern. Remove each connection, and clean any rust. Place a light film of grease and a fresh star washer next to ground point, then the wire connector and other washers. Tighten firmly. Check the lamp sockets for any corrosion and replace same if found. The front lamp flashes rapidly because the rear light not working causes the flasher unit to switch faster.

Oct 13, 2009 | 2000 Ford Expedition

1 Answer

High/rough idle on Ford Expedition


i will check idle speed sensor, most likely this is the problem, and the fuel consumption problem can be related to O2 sensor which makes the car idle very badly, so i suggest you check both
thank you
good luck

Aug 17, 2009 | 2001 Ford Expedition

1 Answer

2000 ford expedition When starting after the


dirty or clogged lifters,either use an engine detergent or 1 quart of diesel fuel in the oil,idle only for about 20 minutes,then change the oil and filter and see how it is now.

Jun 06, 2009 | 2000 Ford Expedition

1 Answer

Vehicle shuts off sometimes when stopping


Set your idle speed to mfg recomindation if that doesnt help check the dash pot that is what keeps the engine from stalling at sudden speed reduction

Mar 15, 2009 | 2000 Ford Expedition

1 Answer

Unknown warning chime on 2000 Expedition


This is basically the door chime that stays on. I had the same problems in a couple Ford trucks. the only easy solution it to find where the chime speaker is on your expedition and disconnect it. It should be somewhere behind where your stereo is.

Jan 08, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...