Question about 1998 Dodge Durango
P0920 Gear shift pos circuit range/perf
P0921 gear shift pos circuit low
P0999 trans fluid press send/switch f circuit low
Posted on Apr 16, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Dodge Durango
The p0300 What does that mean?
Basically this means that the the car's computer has detected that not all of the engien's cylinders are firing properly.
A P0300 OBD DTC code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-
The p0430 What does that mean? Basically this means that the O2
downstream of the catalytic converter on bank 2 is detecting that the converter is not working as efficiently as it should be (according to specs). It is part of the vehicle emissions
Posted on Apr 26, 2009
"P done" means there are no codes stored. If there were codes you would see P and 4 numbers.
Posted on May 27, 2009
The dodge Durango does not have a cabin air filter (pollen/dust filter) The only Dodge to have an dealer option to include one is the Dodge Caravan
Posted on Apr 21, 2010
SOURCE: I am getting the following
They all point to your Transmission Governor and Gears. You will need to take your vechile to a Transmission Shop to diagnose the problem
Posted on Aug 10, 2010
SOURCE: I have a 2000 dodge
P1740-TCC O/D SOL PERFORMANCE
The Torque Convertor Clutch (TCC) and Overdrive Clutch (O/D) will be tested each time the PCM requests TCC engagement in 3rd gear and O/D.
The code will set if the expected RPM drop is not achieved while attempting to engage TCC or O/D. This indicates a malfunctioning torque convertor or overdrive clutch.
Camshaft DTC Present
Engine RPM DTC present
Fuel level low
Misfire DTC present
Output speed DTC present
P1765 DTC present
Park/neutral DTC present
PTO engaged (if equipped)
Torque converter clutch DTC present
TPS DTC present
Transfer case in low range (if equipped)
Transmission relay DTC present
Transmission temperature too cold
Check transmission fluid-debris
Check transmission fluid-stall
3-4 shift solenoid
Oil pan contains excessive debris
Shaft or seal damage
Posted on Aug 15, 2010
Tips for a great answer:
Feb 18, 2015 | Dodge Cars & Trucks
Aug 10, 2010 | 2000 Dodge Durango
Apr 20, 2010 | 2000 Dodge Durango
May 27, 2009 | 2003 Dodge Durango
Oct 15, 2016 | 1998 Dodge Durango
275 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: