Question about 1993 Chevrolet Camaro

2 Answers

Reset anti theift 1993 camero - 1993 Chevrolet Camaro

Posted by on

  • Anonymous May 26, 2016

    Have"Exact same problem"&"what-He said below IS-IS TRUE&ONLY-ONLY way-2-Fix-Unfortunately.Any"VATSII-Key/Lock Cyl/New Chipped key&even resistor-2-BY-Pass VATSII sys-will NOT fix-Because problem IS in cars"TDM-Security system-Starter Disable&Fuel injector DISABLE".:(I've gone thru Entire problem&Cannot"RE-SET even VATS-sys."and Most Certainly NOT the TDM Module-only the PRO'S-can"Maybe-Maybe Fix@cost of-R-U-Sitting Down?At approx.depends if mechanic a relative or Not-if not-then@$1.5K to$2.5K++!!Not kidding-had-2-sell my GM..:(Good Luck-careful who listen to..

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,184 Answers

The security, antitheft or lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
http://www.diy-gm-security.com/

reset anti theift 1993 camero - 25649189-kj3k1qoxxxjrgq41ql4zwyhy-1-0.png

This bypass delete module will work great on your vehicle. Bypasses 100% of the system permanently.

Posted on May 26, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 7,515 Answers

Hey
As i read your question.I suggest you to visit the site it really helo you.My experience of reliable store is good

Posted on May 26, 2016

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

iambanshee74
  • 3489 Answers

SOURCE: on my monte carlo ignition

The system MUST be reset by the dealer. They have to download info into the theft system module. No way around it. They use a handheld unit called a Tech 2 which, after you download the vehicles info, has to hooked to another computer mainframe, then info is downloaded to that and then taken back to the car. There is no bypass.

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does all. Factory anti theift systems on a 2004 ford explorer. Have a valet reset button under stirring column.


There are no reset buttons for a factory security system.

I would start buy checking for fuel pressure and spark. There will be a test port for fuel pressure on the fuel rail. you should see around 35 psi. If there is none than check for power to the fuel pump. I suspect you will find a fuel issue.

Jan 31, 2016 | 2004 Ford Explorer AWD

1 Answer

Reset anti theift


have to take to dealer

Sep 16, 2014 | 2010 Dodge Nitro

2 Answers

Reset anti theft lock on Isuzu Axiom 2002


Wayne White wants more answers to this question
piggybacker....
post symptoms.
same car ?
what fails,
1: engine wont run immoblized
2: alarm dead.
3: alarm trips when all is good.
4: does car drive perfectly day and night.
5: do all other things work perfect. radio, lights?
6: do any cluster lamps fail, keyon, for example
the immobilizer lamp must go out, per operators guide.

we can not guess any of that.
it must be stated up front
why not start your own post.?
with all symptoms. good and bad.

Aug 21, 2013 | 2002 Isuzu Axiom

1 Answer

My mini 2008 have a CD stock in. How do I take it out? Thank you Gillis


WARNING: DO NOT EVEN ATTEMP TO REMOVE THE CD PLAYER IF STOCK AS THE ANTI THEFT RUNS THREW THE RAIDO And yOU WILL TRIGER THE ANTI THEIFT ON THE CAR AND IT WILL NOT START. you have to use a computer hooked to your on board computer to stop the anti-theift from being set off then you need to buy a relay to by pass the alarm system

Aug 01, 2011 | 2004 Mini Cooper

2 Answers

My 2003 Taurus wan't start, but after a while friends told me that is anti theift securty. How I could disarm anti theift securty.?


If this is the case, you have to contact the dealership to get the code. Make sure you have all your vehicle inofrmation. The code may be in your owner manual also.

Mar 03, 2011 | 2003 Ford Taurus

1 Answer

The battery was left off of my 02 ranger and now the anti theift is not working..I only have one key How can I reset the anti theift with one key???????????


Put the key in the ignition, and turn forward all the way just before cranking. Then within 5 seconds, locate, press and hold in the valet/overide button, found under the dash area, (push button, spring loaded) until the installed LED (the blinking light) in your dash area goes on solid, and the siren chirps once.
(Your valet switch might be the toggle (on/off) type. in this case, key on, flip switch in opposite direction, then turn the key off.)
This should reset the alarm, and reset the grounded relay on the starter wire, allowing you to start the engine.
At this point, the only thing working would be the keyless entry from the alarm, if it came equipped that way.
Just Repeat these steps to place it back to usable armed mode. You may get 2 chirps, confirming it, and the lights may flash twice as well.
That should do it.


Dec 11, 2010 | Ford Ranger Cars & Trucks

1 Answer

Battery


YOUR CAR IS EQUIPTED WITH AN ANTI-THEIFT DEVICE
MOST CHRYSLERS WILL RESET IF YOU CLOSE ALL DOORS ,LOCK CAR FROM DRIVERS SIDE "WITH KEY"TAKE KET OUT THEN PUT KEY BACK IN AND UNLOCK IT
THIS SHOULD RESET YOUR ANTI-THEIFT
TRY TO START CAR AGAIN

Sep 18, 2009 | 2005 Dodge Magnum

1 Answer

Anti-theift code for stereo


Your going to have to go to the dealer and give them your vin number and they can give you or reset your radio for you. Good luck and most dealer this is at no charge.

Apr 08, 2009 | 1999 GMC Yukon Denali

1 Answer

Expedition anti theift system


THere are little boxes sold for remote starting on car alarms that you put a key into that will bypass the the anti- theift system

Feb 08, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
1993 Chevrolet Camaro Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...