Question about 1996 Chevrolet Camaro

1 Answer

I have a 1996 Chevrolet Camaro and I cannot get them to go off I cannot hear a click neither when I pull it towards me it's like they're stuck on high beams now. Help

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 290 Answers

I do not think that audibly click but they do physically click back to the middle. Forward for ON and a non-clicking backward fro temporary on so you can flash them at drivers. Then witch probably just wore out after 19 years of use. I'm not sure how hard it is to change them but it is always cheaper to buy them yourself and have them installed. I have saved hundred of not thousands by buying my own parts and you can get better warranties for a minimal cost increase as well. Most mechanics but cheap version and call them "Premium" anyway. I had a "premium" starter die after 2 years. I no longer use that mechanic and the one I got myself is already older then 2 years and I expect to run at least another decade. I just replaced the oxygen sensor. It is covered for 5 years. You will probably only get 90 days to a year on any part from a mechanic.

Posted on Apr 16, 2015


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: DRL and High Beam do not work right on Honda Accord EX 1998

Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.

Posted on Jun 10, 2008

  • 2 Answers

SOURCE: No high beams on 1999 Dodge Caravan; low beams work fine

replace the switch in the column i had the same problem on a 1996 caravan when i replaced the switch the problem stopped

Posted on Jan 10, 2009

  • 150 Answers

SOURCE: 1991 camaro switch for you low and high beams

There is a metal rod that runs down the side of steering colmn and pushes on the dimmer switch. The dimmer switch is on the steering column to the left of the steering wheel. You will have to unbolt the column where it connects to the dash and rest it (the steering wheel) on the driver seat to get to the switch.. The switch is adjustable, just loosen the screws and slide it up or down to get proper adjustment.. Hope this helps.

Posted on Feb 13, 2009

  • 14036 Answers

SOURCE: I have a 1999 ford explorer sport and low beams not workiing.

replace driver module relay .it controls the low beam lights.

Posted on May 03, 2009

  • 299 Answers

SOURCE: the high beam switch won't stay on for a 2000

Needs new dimmer switch.

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I recently bought a well maintained 1995 Camaro, but for the life of me can not figure out how to turn on the high beams. I have driving since 1974, so I don't get it. Please advise.

the turn signal arm which also controls cruise if it has it and wiper control,if you pull this towards you the high beams should come on and if you pull it again it will return to low beams.

Nov 04, 2013 | 1996 Chevrolet Camaro

1 Answer

I keep getting a P0441 code -Evaporative Emission Control System Incorrect Purge Flow on my 1996 chevy camaro it has the 3.5 v6 motor


Oct 15, 2013 | 1996 Chevrolet Camaro

1 Answer

Will not start

do you hear a click sound, when you turn key to start position? if no sound, possible faulty ign switch. another possibility is an anti-theft issue. ( especially aftermarket theft system ) if you do hear a click when you attempt to start, more than likely the starter is at fault.

Feb 06, 2013 | 1996 Chevrolet Camaro

1 Answer

I have a 1996 camaro,the transmission is stuck in drive,the shifter will shift,but it will stay in drive.....

You need to check your shift linkage located on the side of your transmission where your shifter cable runs down and is attached.

Sep 21, 2011 | 1996 Chevrolet Camaro

1 Answer

The hood on my 96 camaro won't latch. The release lever pulled hard, but finally opened. Now it won't latch. any ideas?

It sounds like the mechanical hood latch is stuck in the open position. Try spraying some rust penetrant on the latch and work it back and forth to free it up.

Jan 23, 2011 | 1996 Chevrolet Camaro

2 Answers

1996 camaro stalls at low rpm. when I try to

Start out by checking for vacuum leaks.

Jun 09, 2009 | 1996 Chevrolet Camaro

1 Answer

Power window problems!!!!! window stuck down and it looks like

use the switch from the other side connect just use it and unplug the switch does not work go to motor

May 08, 2009 | 1999 Chevrolet Camaro

Not finding what you are looking for?
1996 Chevrolet Camaro Logo

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides