Question about 2001 Jeep Wrangler
A tow truck is your best bet here, or simply wait until daylight hours to attempt the drive home. The replacement of your turn signal lever is relatively simple, but it won't be cheap.
Posted on Apr 19, 2015
Dont fool around there, AIR bags are man killers.
they most be defeated first. (by the book)
then fix the combo switch.
Posted on Apr 19, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.
Posted on Jul 15, 2009
SOURCE: high beams wont turn on.
First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Posted on Nov 19, 2008
Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.
Posted on Jun 10, 2008
Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse
Posted on Aug 12, 2009
SOURCE: NO High Beams only Low Beams..
When I try to use the high beams on my 2003 buick century they will not stay on when I let go of the lever and when I do let go of the lever sometimes my headlights will all go out. I just gave up on using the high beams at all
Posted on Oct 29, 2011
Tips for a great answer:
Oct 11, 2012 | 1997 Jeep Wrangler
Apr 06, 2010 | 2001 Jeep Wrangler
Nov 24, 2009 | 2002 Jeep Grand Cherokee
Apr 30, 2009 | 2008 Jeep Wrangler
Dec 15, 2008 | 1997 Jeep Wrangler
Nov 14, 2008 | 2000 Dodge Ram Maxi
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: