Question about Isuzu Cars & Trucks
Ask a wrecking yard?
they have the hollander data for that. ask them to. check?
or you do it. at link above?
fits engine rear. and clutch.
no changes to prop shafts.>?
and fits shifter parts?
a direct swap is best way to say this if true.
no cutting welding or other tricks.
or got to isuzu dot com and see if both transmission have same part numbers.
join an isuzu forum.? they;'d never come here, do to no real formatting here, "eg, no swaps sections here)
Posted on Apr 22, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
not nesessary if you can acces the starter from the wheel well all yo have to do is remove the front wheel and yo can move the dust cover and the starter is right in fornt of you easy accesss!!!
Posted on Nov 14, 2008
SOURCE: fuel pump relay
The fuel pump relay is located in the relay box under the hood. This box is located near the battery. The fuel pump relay's location is marked on the lid to this relay box. If your lid is missing, it is the relay just outboard of the pink 30 amp Maxi Fuse.
Posted on Mar 02, 2009
To determine which type of clutch you have, servo hydraulic or cable.
Look down past the engine bell housing and determine the existance of a hydraulic clutch slave cylinder.(a piece of casting with a rod facing towards the rear of the vehicle pocket into a bracket protruding out of the gearbox bell housing. As well as a pipe and bleed nipple to be crude)
(which I believe you have).The hydraulic fluid for this unit is sourced from the brake master cylinder reservoir via a sneaky pipe partially obscured to the clutch master cylinder on the internal firewall.If you have no clutch slave cylinder near the bell housing there would be an obvious bounden cable running from the firewall down to the outer of which will be stopped at a bracket hanging off the engine.The inner will continue to a bracket protruding from the gearbox bell housing.
Posted on Mar 05, 2009
SOURCE: Adding freon to 98 Isuzu Amigo
You need to add the freon on the low side which is usually indicated by a blue cap. The red cap is the high side port. Never add freon using the high side port. Typically if you are buying a guage set from your local auto parts store, it will only attach to the low side service port because they are diffent types of connections. Another easy way to tell is to turn your AC on and feel the lines that the ports are attached to. The low side should be cold/cool and the high side will be hot.
Posted on Jun 28, 2009
What a FRICKIN Idiotic Answer...
Your answer to the question of Life??!!
Let me guess.
How to *LIVE*:-
Eat, ****, Sleep, bathe every once in a while.
Posted on Apr 02, 2010
Tips for a great answer:
Feb 12, 2017 | 1999 Isuzu Amigo
Mar 15, 2016 | 1998 Isuzu Amigo
Apr 06, 2015 | Isuzu Cars & Trucks
Aug 07, 2014 | 1992 Isuzu Amigo
Jun 05, 2013 | 2005 Mazda B2300 Regular
Nov 23, 2010 | 1999 Isuzu Amigo
May 01, 2010 | 1994 Isuzu Amigo
Sep 25, 2009 | 1993 Isuzu Amigo
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: