Question about Cars & Trucks
In side the transmission , to get at it you need to pull fluid pan on the bottom of the transmission !
Posted on Apr 15, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P0753 means your powertrain computer detects a continuous open, short to ground or short to power in the circuit to your transmission's 1-2 shift solenoid. When the code is active, your transmission runs in a fail safe/limp home mode that only lets certain gear ratios function in the transmission.
The solenoid in your application looks like this
and it is located sometimes on the side of the transmission, but my guess is from the looks of it, it might be found inside the transmission, only accessible with the oil pan removed.
The problem might be the solenoid itself, or the wiring going to the solenoid from the computer that controls the transmission, or the computer itself.
Posted on Sep 09, 2009
for the most part they are in between the fuel injector the best thing for you to do is stop by your local GM dealership in the part department and they be able to print you off the pictures and diagrams you need if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car Merry Christmas and Happy New Year as always wish you the best of luck Michigan Man.
Posted on Dec 21, 2009
Testimonial: "great thanks for the info. bobbotg2005"
Actually, the Torque Converter Clutch Solenoid is located within the transmission housing that is easily accessible through the transmission oil pan. The TCC solenoid may vary in location dependent upon manufacture but generally it is located as aforementioned. It can cause your vehicle to stall if stuck open or close because it controls loads to the engine via your torque converter which is located between the vehicle's engine and transmission. Also, make certain that you attempt to change the transmission fluid and filter before changing the TCC solenoid because that may be your underlying issue. If not, simply reuse your fresh oil and change the TCC soleniod.
Posted on Dec 16, 2010
the tps sensor is located on the throtlebody, this is where the air flows into the engine, here is a picture of the tps and also a diagram to help you find it. good day.
Posted on Oct 21, 2011
Tips for a great answer:
Jan 28, 2017 | Chevrolet Cavalier Cars & Trucks
Nov 26, 2016 | 2004 Mitsubishi Galant
Mar 28, 2015 | 2002 Chevrolet Cavalier
Sep 27, 2013 | 2002 Chevrolet Cavalier
Aug 07, 2012 | Chevrolet Cavalier Cars & Trucks
Jun 23, 2010 | 1991 Chevrolet Cavalier
May 13, 2010 | 2002 Chevrolet Cavalier Coupe
Nov 20, 2009 | 1996 Chevrolet Cavalier
Nov 18, 2009 | 1996 Chevrolet Cavalier
Jul 03, 2009 | 2002 Chevrolet Cavalier Coupe
35 people viewed this question
Usually answered in minutes!