Question about AC Cars & Trucks
Yes but you need another idler pulley.
Posted on Apr 15, 2015
Check to see if the AC belt turns anything else, like Power steering, Alternator, Fan, etc. I had a car with defunct AC once, and took its' belt off (the belt was just for AC) with no problems.
Posted on Apr 15, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Picture is for the carbureted model but has the same patter as my fuel injected model. It's actually pretty easy to see how it goes. If the pully has groves then the grove side of the belt will fit right in it prefectly. If it's smooth then the back side of the belt with run along it. To loosen the belt tensioner do two things. first in the picture below you will see in the top middle you will see the tensioner. The back of the belt runs along it. You will notice that it looks like a solid peice. loosen the top slighty with i believe a 15mm. After that connect to the pully attached to it and pull back to the passenger side until you can slid the belt off the alternator. put back on in reverse order. really really simple once you do it. good luck
Posted on Oct 23, 2009
simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.
Posted on Nov 28, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
I am assuming this "van" is a Chevy Venture?
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Tips for a great answer:
Jun 18, 2015 | 2012 Chevrolet Impala
Apr 10, 2014 | 1989 Cadillac Sedan DeVille
Dec 27, 2013 | 1989 Ford F 150
Aug 21, 2012 | Chevrolet Cars & Trucks
Jun 03, 2012 | 2004 Chevrolet TrailBlazer
Dec 14, 2011 | 1989 Chevrolet Celebrity
Oct 01, 2010 | 1995 Chevrolet S-10 CA Edition
May 30, 2010 | 1988 Chevrolet C3500
Jan 15, 2010 | Chevrolet Corsica Cars & Trucks
Jun 12, 2009 | 2001 Chevrolet Cavalier
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: