Question about Toyota Cars & Trucks

1 Answer

How to bleed the master clutch assembly of toyota commuter van

Posted by on

  • Earl DaSquirrel
    Earl DaSquirrel Apr 15, 2015

    what Jim is describing is called gravity bleeding... Google search and look at YouTube for an idea.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 496 Answers

Hi top up the resivour open the bleed nipple and allow the fluid to flow. Keep the resivour topped up. Close the nipple after 5 mins and pump the pedal a good few times. If there is no pressure repeat process. Good luck.

Posted on Apr 15, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the clutch master cylinder in a 1996 Subaru Impreza 2ltr Sportswagon?

To remove or bleed the clutch master, you will need to first remove the battery and the air box. After, you will find the clutch pedal assembly and finally the clutch master cylinder.

May 28, 2016 | 1996 Subaru Impreza

2 Answers

Does Toyota hilux R150 gear box have a clutch adjustment ?ie master cylinder adjustment ?

If it is adjustable it will have a threaded push rod at the slave cyl ,bleed the hydraulic system first adult the clutch then bleed again .

Oct 26, 2015 | Toyota Cars & Trucks

1 Answer

How to bleed clutch master cylinder of toyota hi ace commuter 2010 model??

you bleed the same as you would bleeding brakes. you just won`t get the hard pedal like with brakes but you should feel resistance and no air coming out of system when you open the bleeder screw on the slave cylinder. make sure the reservoir does not get empty or you won`t get the air out of system.

Aug 04, 2015 | 2007 Toyota Hi-Ace 220

1 Answer

Clutch slowly releases with out taking foot of pedal

pedal plunger is bleeding off pressure or the clutch cylinder is bad..replace both..

Dec 26, 2013 | Cars & Trucks

1 Answer

How to change a clutch master cylinder on a 2006 toyota tacoma

remove line from the side of clutch master cylinder two bolts or nuts on firewall inside vehicle is a pin on the upper side of clutch remove and pull old unit out bench bleed new master by filling and pressing in on the piston of the master cylinder. if you dont have a hose fitting dont bench bleed bleed it in vehicle( this method takes longer) install back in vehicle and hook it all back up torque bolts to 25 ft lbs then bleed the slve cylinder from under vehicle near back of motor just like bleeding brakes pump up hold and release the line pressure by opening valve on slave cylinder.

Apr 06, 2013 | 2006 Toyota Tacoma

1 Answer

Slipping Clutch on Toyota Townace 1988 Van.

Check that the slave cylinder is fully releasing the clutch (push the clutch fork and shaft all the away back into slave cyl.. If ok replace the clutch assy.

Mar 29, 2013 | Toyota Cars & Trucks

1 Answer

My son has a 95' toyota camry; the problem is when he depresses the clutch it stays on the floor. He can manually pull it up an it goes in gear, is there a return spring or is it something else? Have...

Looks like a clutch master problem.
You have to replace the clutch master assembly, but you could try first to replace the clutch master repair cap kit( the parts inside can only be replace ) that'll be cheaper, but if the cylinder is already worn you have to buy the assembly.
Bleed it thoroughly afterwards, usually when you replace a new master the slave will give better buy that one down there.

Hope that helped you out!

Sep 13, 2011 | 1995 Toyota Camry

1 Answer

Clutch problem

you still have air in the system very hard to bleed is the slave and master dry look under the dash at the master where it comes through the fire wall to see if it is wet some times you need to power bleed them

Feb 02, 2010 | 1991 Toyota Pickup

1 Answer

91' Toyota Pickup clutch not depressing/stuck.

dude under truck left hand sideof tranny, is your clutch slave cylinder, remove the hydraulic line, the two mount bolts. replace the slave cylndr. you got clutch !!!!

ps i dont recall there being a bleed valve. it should bleed by gravity

james ray

Apr 13, 2009 | 2004 Toyota Highlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides