Question about Cars & Trucks

1 Answer

Ignition switch goes on when key is in off position. And you can start truck but it will not shut off. Unless you pull ign.fuse 2005 Columbia 60 series

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

You appear to have a faulty ignition switch assembly the capsule can be removed and replace with a new assembly along with keys

Posted on Apr 15, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing a fuse engine wont start 2005 hummer h2


Is the anti-theft light lit on the instrument cluster ? Won't start how ? When you turn the key to start , what happens ? Nothing ? This would be a No crank - no start condition . Now if you turn the key to start and the starter engages and spins the engine and it doesn't start an run , this is a engine cranks no start condition ! Now which is your problem ?

There are two fuse's IGN A fuse 40amp and IGN E fuse 10amp ,both are located in the under hood fuse/relay box . Also there is starter relay located in the same under hood fuse /relay box . There also is a crank fuse 10amp in the under hood fuse box . Besides the fuse's and relay ,the ignition switch or the PNP - park neutral position switch could be bad . Testing the whole starter circuit should be done ! How to voltage drop test starter motor circuit

Jan 22, 2017 | Hummer Cars & Trucks

1 Answer

Changed battery terminals cause van wouldn't start now starts and dinging bell wont stop unless warning light fuse is removed. What to do?


  • Is light switch off and key removed and in "off" position.Worn ignition key switch due to much weight on keyring may damage switch, allowing key to be removed when switch not fully in "off" position.

Oct 21, 2014 | 2005 Dodge Caravan

2 Answers

How do i change out the ignition switch?


Ign Systems 8D - 19 Service manual '92 Dak
Disconnect neg battery cable Tilt column:Remove tilt lever (counterclockwise) Remove upper and lower covers (3 screws) Remove ign switch mounting screws (3) with torx bit Gently pull switch away from column Release two connector locks on the seven-terminal wiring connector. Remove connector from ign switch Release connector lock on the Key-in-switch and Halo Light four terminal connector. Remove connector from switch Remove key cylinder from switch as follows: With key inserted and ign switch in the LOCK position use small screwdriver to depress the key cylinder retaining pin flush w/ key cylinder surface Rotate the key clockwise to the OFF position The key cylinder should now be unseated from the ign switch assembly With key cylinder in unseated position (key cylinder bezel about 1/8 inch above ign switch halo light ring) Rotate key counterclockwise to LOCK position and remove key Remove key cylinder INSTALLATION; Install electrical connectors to switch making sure locking tabs are fully seated into connector Mount ign switch to column Shifter must be in PARK position Park-lock dowel pin on ign assy must engage with park-lock slider linkageVerify ign switch is in lock position (flag is parallel w/ ign switch terminals..off to the right) Apply dab of grease to flag and pin Position park-lock link and slider to mid-travel Position ign switch against lock housing face Be sure pin is inserted into park-lock link contour slot Tighten screws Assemble cover Tighten more screws Tilt column and install tilt lever (clockwise) instsall neg battery cable Gently insert key cylinder into ign switch asssy until it bottoms Insert key and gently push key (inward) and rotate clockwise to end of travel Rejoice in how much money you just saved yourself

Jun 16, 2014 | 1992 Dodge Dakota

2 Answers

I start the car and the starter stay ingage I turn the ign switch off then try to start and the same thing happened few times until it start normal do you think its the starter / starter realy or ign


I would suspect that the solenoid contacts need replacing as they may be burning together. Pull the starter and have an accredited auto electrician bench test it.

Mar 11, 2014 | 2005 Chevrolet Malibu Maxx

2 Answers

Radio stays on with ign. off and key removed, windows still work too


open the door , this is a comfort feature with a time delay that will allow you to listen to the radio and roll windows up and down for a set period of time after the keys have been removed usually up to 2 minutes

Aug 23, 2010 | 2005 Chevrolet Express

1 Answer

My car won't shut off


I would suspect your ignition switch is bad. Try turn the key all the way back to the accessory position. If the vehicle will not shut off then open the hood and open the fuse box cover. Find the IGN C (20Amp) fuse and pull it out. This will cut the fuel and ignition to the engine. Do not replace the fuse until you want to start the vehicle or you will drain the battery. Have your ignition switch checked and replace.

Aug 13, 2010 | 2007 GMC Savanna

1 Answer

Losing Power/ignition 2005 Jetta GLI


Check out the vwfixx.com forum online. One guy has a step by step procedure on removing the ignition, says it takes about a half an hour.

Apr 02, 2009 | 1998 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...