Question about 2002 Chrysler PT Cruiser

1 Answer

My 2002 put cruiser reads no bus in ?the odomator display even with ?the key off and out also dash lights flash off and on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 11,086 Answers

The no bus message means one of the control modules isn't communicating on the data bus or isn't working ! I don't know how many modules yours has but ,if it has antilock brakes an I know it has air bags , an PCM - engine transmission computer , the instrument cluster has a control module an all these modules are on a serial data communication network , there share information ! The speedometer gets it's info from the VSS vehicle speed sensor through the PCM over the bus to the instrument cluster same with coolant temperature ! So I would have it taken to the dealer if you don't know about this stuff ! Need special tools to test this 2004 Chrysler Sebring No Bus message in cluster testing

Posted on Apr 15, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

66 chrgr
  • 1011 Answers

SOURCE: my 2006 pt cruiser working fine then turn key it started then

it has a bad chip in the key.not comunicating with the toumbler

Posted on Jan 25, 2009

  • 408 Answers

SOURCE: Check Engine light

Not sure about the gauges problem, but "No Bus" means that the PCM or the computer can not communicate.

Posted on Mar 11, 2009

dreager
  • 119 Answers

SOURCE: 2002 dodge grand caravan. Put key in, all lights

That's normal so you can see your way out of the car....security system

Posted on Feb 28, 2010

  • 117 Answers

SOURCE: fuse diagram for2002 pt cruiser

look in owners manual under fuses

Posted on Jun 08, 2012

  • 550 Answers

SOURCE: 2002 infinity qx4 light in dash flashes "set"

Read this LINK.

GL,
Td

Posted on Oct 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Won't start, new battery connections are all good Key icon is lit up on dash what is the problem?


lost the operators guide.
the dash lamps are explained in them all. all cars.
warning lamps. (IMMoblizer, or SKIM)
car came new with 2 keys, try the 2nd yet, if no second, key
then this is inevitable.

seen the lamp here.
http://www.fixkick.com/Jeeps/SKIM.html

we get that lamp.
we
check fusesuse the 2nd key (i keep 3 working all the time,.....)check battery not weak, 12.6vdc rested is good.scan the PCM to see why, any scan tool can see this. scans key bad, see #2 abovescans can bus errors, get help, at any ASE shop.scan skim box dead. etc.... same.

25913979-xmmwuldfx14zzrsf124ur1zu-4-0.jpgthere i posted it again. 2002 Grand.
see that lamp there???? MR, IMMOBILIZER?
the operators guide tells what to do.... use 2nd key
or get it serviced.
not only that, but he fsm is free, posted over 100 times here.
see WJ jeep 2002
chapter 8q covers this. tells how it works and what to do.

http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Oct 18, 2015 | 2002 Jeep Grand Cherokee

1 Answer

2009 dodge grand caravan error message on dash board no bus or no bu5


the info bus is down try unpluggin the crank sensor on the right side of the transmission see if no bus goes away al see computer cause this issue

Nov 20, 2013 | 2009 Dodge Grand Caravan

1 Answer

PT Cruiser automatic transmission problems


Hello, guys, you may read about this article. Why check engine light is on. It has a very detailed explanation why check engine light is on and how to solve the question.

Aug 31, 2012 | 2002 Chrysler PT Cruiser

2 Answers

Dash lights work but no gauges in my 1994 dodge intrepid!! i have checked every fuse i can find in the dash and under the hood but they still won't work, they don't even flicker when i turn my key....


If you have a 1993-1995 Intrepid and you have a check engine light, you can find out what the codes are by following this process:
To obtain fault codes using the MIL (Check Engine Light):

1. Cycle ignition key to ON, OFF, ON, OFF, ON within 5 second (do not actually crank engine!!)

2. Count the number of times the MIL on the instrument panel flashes on and off. The number of flashes represents the trouble code. There is a slight pause between the flashes representing the first and second digits of the code. Longer pauses seperate the individual two digit trouble code.

Example:
Lamp flashes 4 times, pauses, then flashes 6 more times. This is an indicates a DTC of 46.

3. Lamp will always flash 55 at the end of the test. This signals the end of the test.

You have put the computer in diagnostic mode and it will now display any codes that have been stored in memory. Each code will refer to a symptom your car is feeling.

Here is a list of all codes that can be displayed and what they mean:

http://www.automotiveforums.com/t355082-trouble_codes_for_all_intrepids_1993_2004.html

Post Back With A Code, If you get one.
I Hope this Helps,
Jos
jtobias1020@gmail.com

CHECK OUT THIS ARTICLE! CLICK ON THE LINK AT THE BOTTOM
I Know Yours is A 94' , They didnt change to much in two years. 1993 Dodge Intrepid instrument panel

JB DRUMLIN
  • 1993 DODGE INTREPID
Electrical problem
1993 Dodge Intrepid 6 cyl Two Wheel Drive Automatic

All five guages of the instrument panel do not work.
ie: speedometer
gas guage
temperature guage
automatic quadrant selector
rpm guage
62217_left_ground_1-wjx2pyzwokz1jy5symyt5vs3-3-0.jpg


62217_right_ground_1-wjx2pyzwokz1jy5symyt5vs3-3-2.jpg

After reading through the Article, Pop the Hood and Check out the Grounding Locations. Look for any wire that looks like it should go somewhere. Screw it down (Ground) to the Frame Rail.
First Disconnect the Negative from Battery For a couple Minutes,
If the Engine was replaced they mighta missed a couple Grounds.
One is front Driver corner by the Battery
Two is on Passenger Corner.

1993 Dodge Intrepid Instrument Panel Electrical Problem 1993

I have a feeling there is a Loose Ground or an open, There should be 5-6 Volt Reading coming out of the Cluster,
Let me know how All this goes.
Jos

Feb 28, 2017 | 1994 Dodge Intrepid

1 Answer

Want to reset my (maint requ)light on my toyota fj cruiser


1. With the key off push the trip ODO button on the dash and hold it 2. While holding button insert key and turn to on position but do not start the truck 3. Wait till light flashes and then goes out, and that's it.

Mar 01, 2011 | 2007 Toyota FJ Cruiser

1 Answer

Reset the maint reqd light after an oil change


you put your odometer on trip a or b or just the regular mileage sorry they changed it a couple times anyway you hold the odom reset button with key off turn key to on position you will see several lines that will count down once they count down on odom it will go back to mileage and it should be reset

Dec 23, 2009 | 2006 Toyota Corolla

1 Answer

Maintenance Required light came on & stayed on after oil change


I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
If you do NOT see the dashes, followed by the 5 zeros, start the entire procedure again, but start with the odometer set to TRIP "A". Some vehicles use Trip A instead of the ODO.

You do NOT START the vehicle at any time during the reset procedure.
If the engine starts, the procedure will not reset.

Apr 03, 2009 | 2007 Toyota FJ Cruiser

1 Answer

Check engine light comes on and then the gauges flat line and drop, then the odom reading says no bus?? what does that mean??


Not sure about the gauges problem, but "No Bus" means that the PCM or the computer can not communicate.

Mar 11, 2009 | 2000 Jeep Wrangler

1 Answer

My 2006 pt cruiser working fine then turn key it started then


it has a bad chip in the key.not comunicating with the toumbler

Jan 23, 2009 | 2006 Chrysler PT Cruiser

1 Answer

Peugeot 307 hdi 2002 5 door will not start


Check the fob battery because if the battery has gone then you can't immobilise the car immobiliser which in turn doesn't let you start the engine however it cranking. open the bonnet and remove the clips of car battery for a good 15-20 minutes and put them back and check your remote key and try to start your car. If nothing happens then let your car diagnosed by a experienced mechanic who is able to read out the ecu codes.

Aug 20, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...