Question about Audi Cars & Trucks
I need to change bulb on gear shift as the old one has blown
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: bulb replacment
The bulbs are changed from the rear. There might be a weather cover, once its removed you will see a ring or clip holding in the bulb , remove that to remove the bulb. Install in reverse order. And a little known fact most parts stores will install bulbs for free when you buy them.
Posted on Dec 16, 2008
SOURCE: replace bulb
Depending what side you need to change? Ive changed loads of these for my customers over the years, Golf's and A3's can both be a little tricky. Directly behind the lamp assembly you should see a large single piece plastic cover. x2 tags are visible at the top and have to be depressed for the cover to tilt backwards and upwards to lift out. Be aware, these tags can break so pushing the cover inwards slightly whilst depressing these tags will lesson the chance of breaking. The dip beam bulb is normally a type 499 and will have a 2 wire connector plug. Pull this straight back to remove. A sprung steel clip holds the bulb in place. With a torch you will see an obvious end to this clip. Depress and ease to the side to bring it out of line with its recess. It will no swing backwards and allow the bulb to be removed. Note the tag is upper most on the bulb. Dont touch the glass of the bulb with your fingers, hold it by the base, then reassemble in the reverse order. Hope this helps? Good luck
Posted on Jan 17, 2009
You would be better off to pay $16.00 for a haynes repair manual for that car, it gives a step by step procedure, It would take a lot to tell you on here. If you are going to change the strut springs to the new ones, you need a spring compressor, and if you don't know what your doing and be very careful, and the spring slips and hits you, you will be severelly injured.
Posted on Jun 27, 2009
go to an electro-automobile mechanic and he(she maybe why not a she hahaha) will extrract the speedo part and remove or replace the LED(LIGHT) or fix it!
Posted on Jun 27, 2010
Tips for a great answer:
Mar 20, 2016 | Audi Cars & Trucks
Sep 02, 2015 | Audi Cars & Trucks
Feb 04, 2011 | 2004 Audi A4
Dec 24, 2010 | 2003 Toyota Celica
Nov 28, 2010 | 2003 Toyota Corolla
Feb 20, 2010 | 2003 Audi A4 Cabriolet
Jan 11, 2010 | 1997 Ford F150 Regular Cab
May 30, 2009 | 2000 Audi A4
Mar 04, 2009 | 2004 Jaguar X-Type
Jan 22, 2009 | 1995 Audi 90
16 people viewed this question
Usually answered in minutes!