Will start but stalls imediately
Test fuel pressure, ignition module, ignition relay, fuel pump relay and fuses (2).
SOURCE: 2000 Saturn SL1 started stalling after rear brakes replaced.
check and see where he jacked the car up. he could have smashed the fuel lines
SOURCE: 2002 Saturn Vue V-6 stalls and taks afew minutes
With no engine codes, there are a few things to check.
If your Saturn has over 50K a normal maintenance routine should include a fuel filter replacement, fuel injector cleaning and throttle body cleaning.
If that has been performed, you should have the fuel pump pressure checked. A good pressure reading should be 50 to 60 lbs. If it does not meet that specification, you need to determine if it is pressure regulator or fuel pump related.
Start at the beginning and let me know the status of the cleanings the engine you have and the mileage and we can go from there.
Regards,
SOURCE: 2001 Saturn L200 start and stall
Have you done any component testing? U1000 is a data issue, cant read pulses per minute. This is usually due to a defective crank sensor but you should do component testing first so you don't replace parts on random. Other reasons for this failure can be faulty ignition switch cam positioning sensor, Blown fuse, bad ground, or ECM.
SOURCE: 2002 SATURN SC1 IDLE JUST STARTED BEING TOO LOW
change the TPS also check the air idle control valve
138 views
Usually answered in minutes!
×