Question about Dodge Cars & Trucks

1 Answer

I have a 1985 Dodge do you want big D I want to know what happens if I blew a head on it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Dodge Master
  • 10,875 Answers

You loose,oil or antifreeze,oil gets in antifreeze,antifreeze gets in oil,back pressure in radiator,white smoke from exhaust

Posted on Apr 14, 2015

  • 2 more comments 
  • Kerrie Collins
    Kerrie Collins Apr 14, 2015

    thank u

  • Kerrie Collins
    Kerrie Collins Apr 14, 2015

    Trying un successfully to get it running again have replaced fuel pump,radiator,timing chain kit, already and it's not starting still

  • Kerrie Collins
    Kerrie Collins Apr 14, 2015

    I don't know what is wrong with its cranking but loud backfire won't start any ideas

  •  johnny rebel
    johnny rebel Apr 14, 2015

    check timing and make sure plug wires are on right


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1985 Dodge Power RAM 50, Head liner question.

The fabric and foam are one piece, it is then glued to the cardboard backing and that just site in the roof, no attachment needed.

Dec 01, 2016 | Dodge Cars & Trucks

1 Answer

Why is water getting in my oil in my motor?

I think you blew a head gasket or broken head this is a big proble n costly did u get it hot n does it start n if it start will it run good because if it start n runs good it could be the intake gasket that why water mixing with the oil but n if it doesn't start or it start n run fought you have a bad head gasket or broken head good luck

Oct 03, 2015 | Dodge Cars & Trucks

1 Answer

How do i take the fan off of the fan motor? i have a 1985 dodge charger

you need to remove the fan blade and clutch assembly as one with the big nut between the fan and water pump it turns op of engine big wrench and hit with dead blow hammer

Sep 01, 2012 | 1985 Dodge Ramcharger

2 Answers

How to fix a dropped vavle

Ive pulled the spark plug out and used nylon rope pushed in the cylinder and bumped the engine over to get the valve back up. Use a peice several feet long and tie a big knot on the end so you dont lose it inside the head. From there just replace the keeper and springs, valve guides. If the valve stem is damaged however, you will have to pull the head.

Jan 05, 2011 | 1985 Dodge Ramcharger

1 Answer

Where are the motor mounts on a 1985 911 Carrera

hello there
your motor mounts are in the engine compartment one on the left and the other on the right under 19mm bolt and a big washer.The mounts are held in place with 13mm head bolts.if you need help how to replace them let me know.

Aug 15, 2010 | 1985 Porsche 911

1 Answer

I have a 85 omni glh I blew my brake lights out I replaced the fuse but they still don't work , everything elae works on the car except the hazards , are the brake lights and the hazards connected...

yes they are. if your hazard flasher is bad and you happen to have the hazard switch turned on your brake lights wont work
put hazard switch in one position and check brake lights
then put in other position and check them
if they work with the hazard switch in one position leave switch olone and check fuses and put a new flasher for hazard in

Mar 24, 2010 | 1985 Dodge Omni

1 Answer

In your field

Hi nutsnigga,

As you've got spark the engine must be turning over, otherwise you wouldn't know.... You say that the starter just clicks and the battery is new....If the engine is turning, what do you mean....

If you have spark and fuel and the engine is turning, you've got another problem.....but one that's related.....The most likely, especially if you carried on until the engine became so hot, it stopped you!....the cylinder head gasket has blown....Check the oil and see if it's turned a milky grey colour.....If it has....cylinder head and or gasket....but that's not the end....You may have seized rings or seals....Is it a rotary engine?... With engines these days, the operating temp is much higher, part of falling in with emission controls.....the down side..... if it over heats, much more damage.....Check the compression and see if there's leakage.

Best of luck Johngee10

Sep 05, 2008 | 1985 Mazda RX-7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides