Do I need power to open the seat - Seat Cars & Trucks

Activator is disconnect at the powered unit inside. You need to gain access to this from inside the trunk/boot by removing the rear seat. Push the seat backwards with your knee while pulling upwards on the seat base. Same for both sides. Remove the back of the seat and go in the trunk to reconnect the activator.

get it serviced, the magic is gone.
complex seat parts.
or read the FSM on all those complex tests.
factory service manual, on topic, seats.

ask ford to fix it or buy the book, or get it serviced anywhere;.

there should only be 4 bolts holding the seat, make sure to diconnect any wire connectors if you have power seats. click to see how to do it,
https://www.youtube.com/watch?v=gfJLSi90xes

For seats problem,check the help links given below :----How to remove Seat on car?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html

-----------------
Replacing power adjustable bucket seats to both heated and cooled seats? http://schematicsdiagram.blogspot.com/2011/12/replacing-power-adjustable-bucket-seats.html
----------How to Refit Rear seat? http://repairhelpcenter.blogspot.com/2012/01/how-to-refit-rear-seat-on-rover-600.html
--------How to Remove Rear seat? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html
---------second row seat will not fold? http://technoanswers.blogspot.com/2012/01/ford-freestyle-second-row-seat-will-not.html
------------

For all types of power window problem and power windows not working,i suggest you to go through the help links given below.Click the link to go through its procedure to troubleshoot the problem :------

Power window problem?
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

rear door or window will not open ?
http://technoanswers.blogspot.com/2011/06/rear-door-or-window-will-not-open-on.html
--------------
How to remove door panel, door window motor and regulator ?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

--------

Power windows not working after car wash?

http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html

All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
-------------Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html

------------

How to replace power window motor in car?
http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html
----------
HOW TO REPLACE A POWER WINDOW SWITCH
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html
------------
How to Replace a Window Motor
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html
----------
HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html
---------
HOW TO REPLACE WINDOW RUN CHANNEL SEALS
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html
-------
HOW TO REPLACE A WINDOW REGULATOR
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html

-----------This will help.Thanks.

Call the dealership and ask them how to reset the electronic on your Ford Expedition after changing the battery. Anything else is happen? Maybe like the radio wont turn on, hit the turn signals and the windshield wiper turn on. ***** things happen after replace the battery. I know what it is, it the darn wigits. GB you....stewbison

CHECK POWER SEAT FUSE.IF FUSE OKAY.CHECK FOR POWER AT SEAT SWITCH IF YES.HOT WIRE POWER SEAT MOTOR STILL DONT WORK. POWER SEAT MOTOR FAULTY.NO POWER TO SWITCH AND FUSE GOOD CHECK FOR A OPEN OR BROKE WIRE FROM THE FUSE BOX TO THE POWER SEAT SWITCH.

Power seat quit working on driver side.

ITs the power seat motor itself. unplug the harness conected below the seat switch and check if it reciving and current when the switch in on if it does then reconnect it and chech the current on the other wires when u move the switch if it doed then bro u need a new motor .There are four bolts located below the seat.open them and check for a new motor...

Try this remove the ckt breaker for the power seats the ckt breaker is located in the fuse box inside down by the drivers left foot. leave breaker out for about 10 seconds then reinstall it and see if the seat starts moving. If it does there is a reprogram for this and needs to be done by a dealer or someone who has access to be able to reprogram your vech.
several things could cause your heated seats to not work. If the seat and heated seat seat stopped at the same time could be the reprogram could fix it. If the heated seat quit working at a differant time it could be the seat heater element. get a schematic of the heated seat and ohm the wires for the element. If either element tests open then the element will need to be replaced. You might as well replace both of them at the same time since the seat covers have to come off to replace the seat heaters.(back and bottom ) If one element is bad then both heaters quit working.

check your fuses. The circuit may have been overloaded by the window motor.

does this have automatic seat positioning when you open the door or hit the unlock button on your key fob?

here's how it works:

Seats — Programmable
The memory seat system allows automatic positioning of the driver seat to two programmable positions using the message center, the key fob or the keypad on the door.
Seats — Driver Seat Module
The Driver Seat Module (DSM) is located under the driver's seat and is attached to the seat frame. The DSM will:

• control the movements of the driver's seat and power exterior rearview mirrors
• store and recall seat and mirror positions of two personalized settings
• receive all power seat and mirror control inputs from the Driver's Door Module (DDM) through the J1850 communication network
• move the exterior rearview mirrors downward when the transmission is shifted into reverse, if enabled.

Seats — Driver Door Module
The driver's seat regulator control switch is connected to the Driver Door Module (DDM). The DDM receives the driver's seat regulator control switch input and communicates the direction of movement over the J1850 communication network.
-----------------------------------------------------
Visual Inspection Chart Mechanical Electrical

• Front seat tracks obstructed.
• Seat at limit(s) of travel.

• Open fuse junction panel Fuses 39 (10A), 41 (20A), and 28 (10A).
• Open power distribution box Fuse 13 (30A).
• Loose, corroded or damaged connectors.
• Damaged switches.
• Damaged motors

------------------------------------------------
Also, the dealer can run a scan on your seat modules with his tester and tell you what the codes are. They should only charge an hour to do this. Then you can decide what to do. Call your dealer and ask how much to run the scan test.