Question about 1998 Nissan Altima

Open Question

Ignition timing mark

Where are they ignition timing marks located

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 193 Answers

SOURCE: Can't fine an arrow to line up timing marks.

Hi. The older style engines had a metal arrow on the front timing cover. The newer ones may have a small raised area on the timing cover. It might be best to spray the area down with a can of brake kleen and then wipe the area down with a rag.
Bill

Posted on Nov 24, 2008

Ad
paconos2007
  • 19 Answers

SOURCE: How can I set ignition timing for a 1993 Nissan pickup D21 2.4L

the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2 0

Posted on Apr 21, 2009

  • 124 Answers

SOURCE: timing mark 1994 sentra 1.6l out of 5 marks what

The timing marks indicate degrees of advance. Thus, the first mark would be top dead center and in increments of two it increases to 10 degrees before top dead center.

Posted on Nov 05, 2009

steve_e_uk
  • 1675 Answers

SOURCE: I need the timing marks for a 1990 nissan maxima

hi i have a diagram if you want it you can email me at

steve_e_morris@hotmail.com

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the timing marks for a toyota 3c located?


See the horizontal marks in the picture, those are the timing marks.
26271314-iwa3edl0d1d5zubzvs20knz0-3-0.jpgHere are the marks

Aug 31, 2016 | Toyota Cars & Trucks

1 Answer

Ignition Timing Diagrams for Mazda 323 1990


I am not sure why you would need a diagram for the ignition timing?

I have no access to data on this computer but mostly even the best data books simply provide the written location of the marks and the basic, stroboscopic and a few auto-advance details. In some cases there must be some preparation to ensure accurate timing. Try the link below

https://www.2carpros.com/questions/1990-mazda-323-ignition-timing

Jun 20, 2016 | 1990 Mazda 323

1 Answer

Timing marks located for ignition timing


spark
G16B engine has one ,its on the damper pulley and cover scale.
here
step 5 here
http://www.fixkick.com/IGN_timing/16v-procedure.html

if found way off? the cam belt slipped. fix that first.

Jan 25, 2014 | 1996 Geo Tracker 2 Door

1 Answer

I need to set the timing on a 93 festiva


You need a timing light (assuming that it is the ignition timing that you want to set)
Locate the timing mark in the crankshaft pulley and mark it with chalk or tippex.
Locate the timing marks on the engine front casing.
Have the engine at operating temperature and connect the timing light to the #1 plug or lead(you can do that with the engine running if it is an inductive timing light with a clamp that goes over the cable).
loosen the distributor clamp and, with the light aimed at the timing marks and the engine at idle, adjust the distributor until the crankshaft mark lines up with the specified advance mark on the casing.
Tighten the distributor clamp and remove the timing light.
Be careful of pulleys, belts and fans, all can cause serious injuries if fingers, hair or clothing get caught up in them.

Apr 09, 2011 | 1993 Ford Festiva

1 Answer

2004 ford ranger timing marks 3.0 engine location?


There are no marks for this engine. The ignition timing is controlled by the Powertrain Control Module (PCM). No adjustment is necessary or possible. Is there a problem we can help you with?

Sep 23, 2010 | Ford Ranger Cars & Trucks

2 Answers

How do i set the timeing


There is NO manual timing adjustment for the ignition. It is controlled by the knock sensor and the computer. If you need the timing marks for the timing belt, please respond and I will send it to you. If not, what kind kinds of problems are you experiencing?

Sep 11, 2010 | 2000 Kia Sephia

1 Answer

Do you know the firing order on a 1981 fiat x19 1.5 engine


X1/9 1500,
Ignition system type: CB
Ignition coil make/type: Lu/DLB101
Supply voltage: n / a
Primary resistance: 2.4-3.3 Ohms
Secondary resistance: 3330-4070 Ohms
Distributor make/type: Ma/S135LX
Contact breaker gap/air: 0.4 mm
Dwell angle: 52-58 Deg
Ignition Timing - unleaded: n / a Deg eng/rpm (without vacuum)
Ignition Timing - leaded: 5/800 Deg eng/rpm (without vacuum)
Timing mark location: Pulley
No 1 plug location: N/S/R
Firing Order: 1-3-4-2
Spark plug make: Bosch
Spark plug type: WR6DC
Electrode gap: 0.7 mm

Mar 25, 2010 | Fiat X1/9 Cars & Trucks

1 Answer

How to time a ford 7.5 litre engine


4e54c51.gif
V8 timing marks

With the Dura Spark II system, only an initial timing adjustment is possible. Ignition timing is not considered to be a part of tune-up or routine maintenance.
With the TFI-IV system no ignition timing adjustment is possible and none should be attempted.
  1. Locate the timing marks on the crankshaft pulley and the front of the engine.
  2. Clean the timing marks so that you can see them.
  3. Mark the timing marks with a piece of chalk or with paint. Color the mark on the scale that will indicate the correct timing when it is aligned with the mark on the pulley or the pointer. It is also helpful to mark the notch in the pulley or the tip of the pointer with a small dab of color.
  4. Attach a tachometer to the engine.
  5. Attach a timing light according to the manufacturer's instructions. If the timing light has three wires, one is attached to the No. 1 spark plug with an adapter. The other wires are connected to the battery. The red wire goes to the positive side of the battery and the black wire is connected to the negative terminal of the battery.
  6. Disconnect the vacuum line to the distributor at the distributor and plug the vacuum line. A golf tee does a fine job.
  7. Check to make sure that all of the wires clear the fan and then start the engine.
  8. Adjust the idle to the correct setting.
  9. Aim the timing light at the timing marks. if the marks that you put on the flywheel or pulley and the engine are aligned with the light flashes, the timing is correct. Turn off the engine and remove the tachometer and the timing light. If the mark are not in alignment, replace the ignition module.
01ff395.gif
Underhood emissions sticker

Nov 30, 2009 | 1986 Ford F 250

Not finding what you are looking for?
1998 Nissan Altima Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...